Bumper

A faithful reproduction of the rear bumper on the legendary Porsche 911 3.0 RSR, this reinforced polyester part gives your 964 an iconic 70s racing look.
Designed with a precise fit and high-end manufacturing quality, it mounts in place of the original fender for an authentic look and perfect integration.
Features:Faithful design: reproduction of the Porsche 911 3.0 RSR styleReinforced polyester construction (GFK): strong and durableMeticulous fitReady-to-paint finishCompatibility: Porsche 964 (1990-1994)
An ideal choice for Porsche enthusiasts looking for :
A restoration faithful to the RSR styleTop-of-the-range restomod personalization inspired by racingTrack preparation in the spirit of the legendary 911 racing cars

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer."

Quality part, referred to as adaptable" as it is not provided by the vehicle manufacturer."

Original ABS primed rear bumper for Volkswagen Corrado:

- All models phase 2 from 09/1991 to 07/1995

ATTENTION: Not for Corrado phase 1!

Rear bumper sold bare without brackets or fittings. Supplied in primer. We recommend that you first carry out a "blank assembly" to check fastening adjustments before final painting.

Original VW Classic Parts.

Front bumper for Bmw 7 Series: -  Compatible with all Bmw versions Series 7 E38 from  07/1993 until 07/2001 except725 TDS engine code M51. < p>Be careful! Not suitable with optional S541A active cruise control.   Shield front with holes for the fog lights, sold naked without support, without moldings and without grids.

It is delivered in primary primer. We advise you to first carry out a "blank assembly" in order to check the fixing adjustments before final painting.

Give your 2006-2012 Porsche Boxster 987 a look directly inspired by the 997 GT3 RS with this polyester front bumper, designed to combine sporty aesthetics with aerodynamic performance.
Features:
Compatibility: Porsche Boxster 987, all versions.Design: reproduction of GT3 RS styling, with integrated spoiler for an iconic look.Construction: high-quality, robust, lightweight polyester, made in France.Assembly: precise fit, unmodified installation, delivered in one piece.Finish: delivered ready to paint, for perfect customization to match your body color..Advantages :
Aesthetic transformation: gives your Boxster the look of a GT3 RS.Optimized aerodynamics: better air penetration and enhanced stability.Top-of-the-range quality: meticulous manufacturing, perfect fit.Easy customization: license plate holder to suit your needs.

A faithful reproduction of the front bumper on the legendary Porsche 911 3.0 RSR, this reinforced polyester part gives your 911 Type G the iconic look of the racing models of the 70s.
Designed with a precise fit and high-end manufacturing quality, it mounts in place of the original fender for an authentic look and perfect integration.
Features:Faithful design: reproduction of the Porsche 911 3.0 RSR styleReinforced polyester construction (GFK): strong and durableMeticulous fitReady-to-paint finishCompatibility: Porsche 911 Type G (1974-1989)
An ideal choice for Porsche enthusiasts looking for :
RSR-style restoration Top-of-the-range, race-inspired restomod customization Track preparation in the spirit of the legendary 911 racing cars

Right rear bumper fitting for VW Combi Split from 03/1955 to 08/1958

Give your Porsche the true styling signature of the legendary 911 2.7 RS!
Today, a genuine 2.7 RS costs hundreds of thousands of euros, but it is possible to transform your 911 into a convincing replica, or simply make a customized version with top-quality components.
The rear bumper is made of polyester-reinforced fiberglass - a material that needs no introduction, since it has been used both in motor racing and in the construction of legendary cars - is manufactured in France by a recognized specialist who has worked for Porsche for decades.It offers great strength and significant weight savings compared to the original component.
Ideal for restomods, track preparation or restorations, this part benefits from a precise fit thanks to castings made with the utmost care.
Suitable for Porsche 911 type F long chassis :
- 911 2.0 from 1967 (long chassis only)- 911 2.0 S from 1967 (long chassis only)- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973

Give your Porsche the true styling signature of the legendary 911 2.7 RS!
Today, a genuine 2.7 RS costs hundreds of thousands of euros, but it is possible to transform your 911 into a convincing replica, or simply make a customized version with top-quality components.
The rear bumper is made from carbon-kevlar, a noble material that needs no introduction, having been used in motor racing as well as in the construction of legendary cars. is manufactured in France by a recognized specialist who has worked for Porsche for decades.It offers great strength and significant weight savings compared to the original component.
Ideal for restomods, track preparation or restorations, this part benefits from a precise fit thanks to castings made with the utmost care.
Suitable for Porsche 911 type F :
- 911 2.0 from 1967 (long chassis only)- 911 2.0 S from 1967 (long chassis only)- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973

Front bumper for Volkswagen Golf 7
For VW Golf 7 Phase 1 (2012-2017) standard finish
Without holes for ParkControlWithout holes for headlamp washerPrimed bumper to be painted in body color
Not suitable for GTI, GTD, R, GTE, Alltrack trim levels

For: Audi A6 04/97 ->07/01 (up to chassis ->4B-Y-045 000)
with 4- & 6-cylinder engines.

WARNING: not suitable for S6, RS6 or V8
the bumper has holes designed for headlight washers.
it is delivered without reinforcement.

For: Audi A6 08/01 ->05/04 (from chassis 4B-Y-046 001->)

the bumper has holes designed for headlight washers

Front bumper for Audi A4 (B7)
For Audi A4 (B7 ) all Sedan, Variant and Cabriolet models except Sport S-Line or S4 versions
Primedfront bumper, to be painted in body colorWith fog lamp slotsWith holes for ParkControl (2 holes)With holes for headlamp washers

Rear bumper for Audi A4 (B7)
For Audi A4 (B7) all saloon modelsNot suitable for Estate or Cabriolet
Rear bumper without holes for ParkControlPrimed part, to be painted in body color

Front bumper for Audi A4 (B7)
For Audi A4 (B7 ) all Sedan, Variant and Cabriolet models except Sport S-Line or S4 versions
Primedfront bumper, to be painted in body colorWith fog lamp slotsWith holes for ParkControl (2 holes)Without holes for headlamp washers

Rear bumper for Audi A4 (B7)
For Audi A4 (B7) all saloon modelsNot suitable for Estate or Cabriolet
Rear bumper with holes for ParkControlPrimed part, to be painted in body color

Quality part, called "adaptable" because it does not come from the manufacturer, standard version, not suitable for pack M,

For E87 without headlamp washers:
- All models

Quality part, called "adaptable" because it does not come from the manufacturer, standard version, not suitable for pack M,

For E87 with headlight washers:
- All models

Quality part, called 'adaptable' because it is not supplied by the vehicle manufacturer,

For E60 LCI from 03/07->
- All models (except M5)