Bumper

This single step on the right side on the front bumper is a faithful reproduction of the original.

It is made of thick steel and to a high quality matching the original! Black epoxy paint finish for long-term corrosion protection.

For VW Kombi Type 2BayWindow
Years: 08/1967 -> 07/1972
Chassis: up to no.->212 2300 000.

Complete USA type stainless steel reinforced front and rear bumpers.

For VW Kombi Split T1
Years: 08/1958 ->07/1965

Complete USA type stainless steel reinforced front and rear bumpers.

For VW Kombi Split T1
Years: 08/1965 ->07/1967

Heavy Duty 2.3mm thick sheet metal rear bumper blade without rubber moulding hole for VW Transporter T25 / T3 from 05/1979 to 07/1992.Finish: high-quality chrome.Supplied bare, without fittings or end caps.

Complete USA type reinforced rear bumper with bars. Comes in basic metal to be painted.
Wolfsbürg West quality.

For VW Kombi Split T1
Years: 08/1958 -> 07/1967
Chassis: from no. 385 000->

Original sheet metal front bumper blade with holes for rubber moulding for VW Transporter T25 / T3 from 05/1979 to 07/1992Finish : Good quality chromeDrilled for mounting a rubber ribSupplied bare, without fittings or end caps.

Frontchrome-plated square bumper.Given the quality of chrome currently on the market, we cannot guarantee it over time
. You are advised to paint the insides of your bumpers with anti-rust paint and look after your chrome at regular intervals.

For VW Combi Bay Window, 08/1972 ->07/1979
since chassis no. 213 2000 001->

Front bumper in black plastic, original type
Model without hole for foglamps.

For Transporter T4 phase 3:
- Caravelle all models since 96->
- Multivan all models since 99->
with long nose (oblique headlamps, round radiator grille).

Black rear bumper protection for VW CADDY between 2004 & 2015.
For painted bumpers.
Superior quality. Black ABS protection above bumper.
Protects the paintwork on the upper section of bumper from scratches.
Matches the original vehicle design, easy installation and quick to position, thanks to the high quality double-sided self-sticking strip or can be fixed with the original screws on the designated points. Colour: black
For VW CADDY between 2004 & 2015.

Left front bumper only for VW Combi Type 2 Bay Window T2A and T2AB from 08/1967 to 07/1972 up to chassis no. 2122300000.

Front bumper blade for Ford Capri III

For Ford Capri 3 all models from 1978 to 1986

Center bumper section
Black color

Front bumper in black plastic, original type
Model with holes for foglamps.

For Transporter T4 phase 3:
- Caravelle all models since 96->
- Multivan all models since 99->
with long nose (oblique headlamps, round radiator grille).

Left rear bumper corner DANSK without hole for exhaust pipe for Porsche 911 type F and 912 from 1969 to 1973 :

- Porsche 911 type F :

- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1969

This rear bumper corner is relevant for the installation of a muffler with center tailpipes.

White rear bumper for VW Combi Bay Window T2A from 08/1967 to 07/1971.

Technic M-type rearbumper for Bmw 3 Series:
- Compatible with all Bmw 3 Series F30 Sedan versions from 10/2011 to 05/2019.
Good to know:
- Compatible with PDC reversing radar options.
- Accessories andair guide included in kit.
- Supplied without bumper reinforcement , to be fitted over the old bumper.
- Supplied in primer. We recommend that you first carry out a blank assembly to check fastening adjustments before final painting.
With all the features of the original M bumper for your sedan or station wagon, it will bring a racy , sporty design to your car!

Original typerear bumper for Bmw 3 Series:
- Compatible with Bmw 3 Series F30 Sedan basic finish from 02/2011 until 7/2015.
Please note:
- Not suitable with option S507A PDC reversing radar .
- Supplied in primer. We recommend that you first carry out a "blank assembly" to check fastening adjustments before final painting.

Baja" double-tube rear bumper

Front bumper for Volkswagen Scirocco 3
For VW Scirocco 3 all models from 2008 to 2014 Not suitable for Scirocco R
Primedfront bumper, paintable in body colorWithout holes for headlamp washers

Front license plate holder for Mercedes E-Class W210 since 10/1999
Part to be painted
Suitable for sedan and station wagon

Standard black ABSrear bumper for Volkswagen Golf 3
Rearbumper trim only without reinforcementStandard grained black rear bumper for Golf 3 Sedan and Cabriolet
Genuine Volkswagen part