mon compte

My account

Sign In

mon compte

My cart

0 items 0.00

Items present in your cart (0 items) :
Total : 0.00
See my cart

RESEARCH BASED ON YOUR VEHICLE OR ON KEYWORDS


Back to

Engine treatments - Porsche 911 & 912


Number of parts : 16

A propos de la traduction Traitement Mecacyl CR pour bas moteur - 4 temps - 100 ml

UD10222
Customers' note : 16 votes
16 notas
In stock
In stock, shipped
05 December 2016
28€00
Mecacyl CR est leseul hyper lubrifiant complémentaire de tous les bas moteurs de moteurs 4 temps essence (dont hybride), Diesel ou gaz.
Il s'utilise à chaque vidange. Sa forme de lubrification permet un meilleur rendement, une augmentation de la puissance du couple, un gain de performances, une diminution verticale de la pollution, une économie de carburant de l'ordre de 8 à 15%, un silence et une souplesse incomparable pour un plaisir complet.

Conditionnement: 100 ml

A propos de la traduction Metal 5 Curative, 70 ml

UD03500
Customers' note : 28 votes
28 notas
In stock
In stock, shipped
05 December 2016
53€00
Specially designed and recommended for engines with more than 100,000 km on the clock or with the first signs of premature wear.
- Results from 100 km after treatment.
- Effective from 25,000 km

A propos de la traduction Engine flush

UD10204
Customers' note : 36 votes
36 notas
In stock
In stock, shipped
05 December 2016
17€50
Clean the inside of your engine.
- By eliminating all impurities from your engine, it works better and its service life is extended,
- Increases engine performance through better compression.

A propos de la traduction GLISS 5 engine hyper-lubricant, 300 ml

UD10208
Customers' note : 3 votes
3 notas
In stock
In stock, shipped
05 December 2016
43€00
Prevents engine wear by limiting friction.
Reduces consumption.
Improves performance by freeing-up power.
Facilitates starting and makes your engine more flexible.
Delays the aging of your oil.

With the engine switched off, pour a bottle of Gliss 5 into the oil filler port.

A propos de la traduction VIDANG 5 Pre-oil change cleaner, 250 ml

UD10209
Customers' note : 10 votes
10 notas
In stock
In stock, shipped
05 December 2016
22€00
Gently cleans the inside of your engine.
Facilitates oil circulation.
Prevents premature clogging of the oil filter.
Maintains the original properties of oil for a long time.
Reduces polluting emissions.

1.Before changing the oil, with the engine warm, pour Vidang 5 through the oil filler port.
2.Drive and run the engine for 15 minutes.
3. Drain the oil with the engine switched off whilst the oil is still warm (replace the oil filter also).

A propos de la traduction METAL 5 motorbike special remetalising treatment, 50 ml

UD10213
Customers' note : 6 votes
6 notas
In stock
In stock, shipped
05 December 2016
38€00
Metal 5 special motorbike prevents and delays wear due to friction by the gradual continuous supply of soft metal micro-particles to areas subject to friction.
Extends engine life.
Maintains the balance of compression strokes.
Maintains bearing/crankshaft clearances at their optimum level.
Improves flexibility and responsiveness.
Optimises performance.

For 4-stroke engines:
Treatment should be carried out after an oil change and replacing the oil filter. Pour the bottle into the oil sump.
For 2-stroke engines:
Pour 5 cm3 of the product into the spark plug housing

A propos de la traduction Traitement Mecacyl - CR BIO Ethan 4 temps - 100 ml

UD10232
 
 
In stock
In stock, shipped
05 December 2016
29€50
Pour votre véhicule fonctionnant au bioéthanol, Mécacyl :
‐ facilite les démarrages à froid en réduisant l'usure donc prolonge et protège votre mécanique,
‐ prévient ou réduit les bruits de lime et autres (bruits de poussoirs hydrauliques par exemple) donc installe le silence et le confort de conduite,
‐ limite les montées en température donc limite les consommations d'huile,
‐ permet d'obtenir un meilleur rendement donc permet de développer plus de couple, de puissance et de reprise,
‐ permet de consommer moins pour un même rendement donc fait faire des économie de carburant
‐ et permet une combustion plus propre avec moins de consommation
donc facilite le passage du contrôle anti-pollution.
Et spécifiquement pour l'éthanol,
‐ limite les conséquences de la dilution des alcools dans l'huile
donc protège votre mécanique.

Conditionnement: 100 ml

A propos de la traduction Cam-Shield Treatment - ZDDP - 88.5

UD10320
Customers' note : 19 votes
19 notas
In stock
In stock, shipped
05 December 2016
24€50
This zinc-based treatment (anti-friction lubricant) extends your engine's longevity by protecting the camshaft and tappets.
Modern oils do not have the same properties and the ZDDP content hasgreatly reduced.
This lack of ZDDP results in wear and deterioration ofcamshafts and tappets, causing, among other things, pitting on older engines (VW air-cooled, for example).

This Cam Shield additive retains a good level of ZDDP content and therefore effectively protects your camshaftand tappets. Assembly greases are also available.

With Cam Shield your camshafts, tappets, rocker arms, valve stems, etc. will finally be lubricated as they should be.

Contents: 88.5 ml, ideal to treat 4 to 5L of oil for a racing car or 8 to 10L for normal usage.

Warning: not suitable for cars fitted with a catalytic converter.

A propos de la traduction Cam Shield Putty - ZDDP - (Special assembly) - 18 g

UD10390
Customers' note : 8 votes
8 notas
In stock
In stock, shipped
05 December 2016
9€00
This zinc-based CAM SHIELD paste is used to replace the assembly grease usually supplied with the camshaft. It increases the longevity of the camshaft and tappets.

Contents: 18 g (can be used on 1 to 2 engines).

Warning: not suitable for cars fitted with a catalytic converter.

A propos de la traduction Bardahl Maximum Compression

UD20200
Customers' note : 11 votes
11 notas
In stock
In stock, shipped
05 December 2016
39€00
When should you use it?
Loss of compression and oil pressure.
Loss of power at high speeds.
Excessive oil consumption.
Oil seepage and leaks.
Abnormal engine noise and wear.

Properties:
Re-establishes and re-balances compression strokes.
Stops oil leaks by returning elasticity to the seals.
Reduces oil consumption.
Reduces engine noise.
Improves power and performance.
All types of oils and all types of engines.

Instructions:
With theengine warm, add ½ bottle to your oil sump when changing the oil or when topping it up.

A propos de la traduction Bardahl Pre-Oil Change Cleaner, 300 ml

UD20203
Customers' note : 9 votes
9 notas
In stock
In stock, shipped
05 December 2016
25€00
When should you use it?
To clean the entirepetrol, Diesel or LPG lubrication system, with or without turbo.

Properties:
Dissolves sludge and particles and keeps them in suspension.
Cleans the inside of your engine.
Reduces pollution.
Extends your engine's working life, by providing optimum lubrication.
For any type of oil or any type of engine.

Instructions:
Before changing the oil:
With the engine warm, pour the contents of the bottle so that it is up to 10 to 15% of the contents of the oil sump.
Drive 200 km or run the engine while stationary for approximately 15 minutes.
Then drain the oil, change the oil filter and add new oil.

A propos de la traduction Bardahl Diesel Technical Check Pass

UD20204
Customers' note : 8 votes
8 notas
In stock
In stock, shipped
05 December 2016
38€00
When should you use it?
To reduce your fuel consumption and restore performance.
To pass technical checks easily.

Properties:
Contains a bottle of "Smoke Stop" and a bottle of "Injector Cleaner".
Stops smoke.
Reduces fuel consumption.
Restores performance.

Instructions:
Smoke stop: with the engine warm, whentopping up or after changing the oil, pour the full bottle into your engine's oil sump.
Injector Cleaner: pour the contents of the bottle into 20 l of fuel.

A propos de la traduction Bardah Petrol Technical Check Pass

UD20205
 
 
In stock
In stock, shipped
05 December 2016
38€00
When should you use it?
To pass technical checks easily.
To restore performance.

Properties:
The pack contains a bottle of Smoke Stop and a bottle of Injector Cleaner.
Stops smoke.
Reduces fuel consumption.
Restores performance.

Instructions:
Smoke stop: with the engine warm, when topping up or after changing the oil, pour the full bottle into your engine's oil sump.
Injector Cleaner: pour the contents of the bottle into 20 l of fuel.

A propos de la traduction Engine Leak Stop, 300 ml

UD20207
Customers' note : 16 votes
16 notas
In stock
In stock, shipped
05 December 2016
25€00
When should you use it?
To eliminate engine oil leaks and seepage.

Properties:
Increases the size of seals by up to 70%.
Softens joints and hardened and shrunk seals.
Reduces deposits on valves.
Reduces camshaft and rocker arm noise.
All types of oil and all types of enginesWhen should you use it?

Instructions:
After changing the oil and oil filter, add the contents of your bottle into your oil sump.

One bottletreats up to 6L of oil

A propos de la traduction BARDAHL SpecialHydraulic Tappets, 300 ml

UD20210
Customers' note : 24 votes
24 notas
In stock
In stock, shipped
05 December 2016
24€90
Special Hydraulic Tappets reduces noise and wearand eliminates deposits.
Long-lasting.

Pour the bottle into the engine with the oil topped up or after draining. Compatible with all types of oil,petrol and Diesel engines, common rail and high-pressure, catalytic converters and particle filters.

A propos de la traduction Bardahl Full Metal, 400 ml

UD23040
Customers' note : 3 votes
3 notas
In stock
In stock, shipped
05 December 2016
38€00
When should it be used?
From the first oil change, at each oil change.

Properties
Restores piston/cylinder wall.
Reduces oil and fuel consumption.
Improves flexibility, restarts and acceleration.
Improves performance and engine power.
Does not block the oil filter.
Compatible with all types of oil and all types of engine.

Instructions:
After changing the oil and replacing the oil filter, with the engine warm, pour the bottle into the engine oil.


You do not find a product ? Altura