New turbo without exchange for Audi A3 type 8L TDi 100/110hp

Details about : New turbo without exchange for Audi A3 type 8L TDi 100/110hp

For A3 (8L) :
- 1.9 TDi 100hp (ATD) up to chassis ->8L-2-073173
- 1.9 TDi 110hp (ASV)

Precautions must be taken when replacing a Turbo:
- The oil circuit must be cleaned to remove any residues that may clog the circuit.
- replace the oil and oil filter
- Check and clean oil intake and return ducts
- Air and breather hoses also need checking
- Using a syringe, fill the turbo with oil through the turbo oil inlet, then prime the turbine by hand.
- Once the new turbo has been fitted, start the engine and let it idle for 10 minutes. Before stopping the
engine, let it idle for a few seconds (do not accelerate sharply before stopping).