mon compte

My account

Sign In

mon compte

My cart

0 items 0.00

Items present in your cart (0 items) :
Total : 0.00
See my cart

RESEARCH BASED ON YOUR VEHICLE OR ON KEYWORDS


Back to

PROPEX heating - heater & ventilation - VW Bus Bay Window


Number of parts : 26

A propos de la traduction PROPEX HS2000 gas heater - 1900W 12V

KB50000
 
 
Paiement en plusieurs fois par carte bancaire
Under 3 days
Under 3 days
649€00
Interior stationary PROPEX gas heater Model: Heatsource HS2000. Power 1900 Watts - 12 Volts. Make your vehicle comfort all year round! Advantageously replaces an old and bulky EBERSPAECHER, with its compact dimensions: L 320 x l 172 x h 100 mm. The kit includes:
- 1 x heating unit HS2000 12v 30mbar
- 1 x thermostat
- 1 x thermostat cable 3.5 m
- 1 x power cable 12v 3.5 m
- 1 x inlet pipe 1.0 m
- 1 x exhaust pipe 0.75 m
- 1 x adjustable hot air outlet grille
- 1 x cold return air grille
- 1 x bag of clamps, clips, screws, fuses, etc.
- Installation booklet with assembly jig.
A connection and power supply kit for the cylinder depending on the choice of fuel and some optional accessories needed for final installation according to your vehicle and use.

The HS2000 appliance is manufactured in England in stainless steel, this 2-stage, fully automatic heating system with thermostatic control blows heated air using propane, butane or LPG. It is totally self-contained (no link to a tank or engine), so can be used anywhere (4 x 4, camper vans, caravans, boats, field shops, etc.).

This PROPEX Heatsource HS2000 heater must be installed and/or inspected by a gas-accredited professional before use. Compliant with the latest European standards: EN5008-1, N55014-1, EN60945, EN50082-1, EN50014-2, EN624/2000, EN298.

A propos de la traduction Kit with additional PROPEX gas heater grille

KB50005
 
 
In stock
In stock, shipped tomorrow
09 December 2016
49€50
With this you can add another hot air zone.
The kit includes:
- 1 x adjustable opening/closing grille
- 1 x triple Y coupling
- 1 x Hot air duct 1.0 m
- 4 x clamp collars
- 4 x outlet vent screws

Information:
A maximum of three heat outlets can be installed, provided the total combined length of the piping does not exceed 5 metres.

A propos de la traduction 1M hot air pipe for PROPEX gas heater

KB50006
 
 
In stock
In stock, shipped tomorrow
09 December 2016
13€90
1-metre hot air pipe for PROPEX gas heater. For installation of an additional or replacement grille.

Information:
A maximum of three heat outlets can be installed, provided the total combined length of the piping does not exceed 5 metres.

A propos de la traduction 1 additional grille for PROPEX gas heater

KB50008
 
 
In stock
In stock, shipped tomorrow
09 December 2016
20€90
Additional adjustable opening/closing heat outlet nozzle. Comes with a 60 mm reducer for the pipe. PROPEX.

Information:
A maximum of three heat outlets can be installed, provided the total combined length of the piping does not exceed 5 metres.

A propos de la traduction Y coupling for additional PROPEX gas heater grilles

KB50009
 
 
In stock
In stock, shipped tomorrow
09 December 2016
16€00
Y coupling to fit additional gas heater grilles. Diameter: 60 mm. PROPEX.

Information:
A maximum of three heat outlets can be installed, provided the total combined length of the piping does not exceed 5 metres.

A propos de la traduction Pipe fastening for PROPEX gas heater

KB50010
 
 
In stock
In stock, shipped tomorrow
09 December 2016
45€00
This pipe supporting plate firmly fixes the air intake and exhaust underneath vehicle. It lets you use your PROPEX heating system in complete safety while driving, while the vehicle in which it is fitted is in motion.

Information:
The exhaust pipe cannot be shortened, but it can be lengthened if need be up to 2 metres, and the outlet must be fitted to the side of the vehicle.

A propos de la traduction Butane gas bottle connection kit

UB60001
 
 
In stock
In stock, shipped tomorrow
09 December 2016
32€90
Connection for Butane gas bottle (blue).

The kit includes:
- 1 x Butane Gas pressure relief valve
- 2 x 1 m high-pressure pipe
- 2 x tightening clamps
- 1 x splined union
- 1 x gas bottle holder

A propos de la traduction Campingaz gas bottle connection kit

UB60002
 
 
In stock
In stock, shipped tomorrow
09 December 2016
32€90
Connection for Campingaz gas bottle (blue).

The kit includes:
- 1 x Campingaz pressure relief valve
- 2 x 1 m high-pressure pipe
- 2 x tightening clamps
- 1 x splined union
- 1 x gas bottle holder

A propos de la traduction Propane gas bottle connection kit

UB60003
 
 
In stock
In stock, shipped tomorrow
09 December 2016
32€90
Connection for Propane gas bottle (orange).

The kit includes:
- 1 x Propane Gas pressure relief valve
- 2 x 1 m high-pressure pipe
- 2 x tightening clamps
- 1 x splined union
- 1 x gas bottle holder

A propos de la traduction Raccord tétine 20x150 P45/36

CB10062
 
 
In stock
In stock, shipped tomorrow
09 December 2016
5€00
Raccord tétine 20x150 P45/36.
P 45/36.
Pour raccorder tuyau souple sur filetage 20 x 150.
Propane haute pression.
Vendu à l'unité.

A propos de la traduction Raccord bicône droit pour tuyau 8 mm

CB10046
 
 
In stock
In stock, shipped tomorrow
09 December 2016
4€50
Raccord bicône droit pour tuyau 8 mm.
Raccord droit acier, sans soudure.
Pour tuyau rigide ø 6/8 mm.
2 bicônes ø 6/8 mm.
Vendu à l'unité.

A propos de la traduction Kit écrou + olive diam 8 mm

CB10102
 
 
In stock
In stock, shipped tomorrow
09 December 2016
4€00
Kit écrou + olive diamètre 8 mm pour raccord bicône.
Pour raccord bicône diamètre 8 mm.

A propos de la traduction Raccord bicône coudé pour tuyau 8 mm

CB10048
Customers' note : 3 votes
3 notas
In stock
In stock, shipped tomorrow
09 December 2016
6€00
Raccord bicône coudé pour tuyau 8 mm.
Raccord coudé acier, sans soudure.
Pour tuyau rigide ø 6/8 mm.
2 bicônes ø 6/8 mm.
Vendu à l'unité.

A propos de la traduction Raccord bicône droit pour tuyau 8 & 10 mm

CB10114
 
 
Under 2 weeks
Under 2 weeks
5€50
Raccord bicône droit pour tuyau 8 & 10 mm.
Raccord droit acier, sans soudure.
Pour tuyau rigide ø 8/10 mm.
2 bicônes ø 8/10 mm.
Vendu à l'unité.

A propos de la traduction Raccord bicône "T" tuyau 8 mm

CB10050
 
 
Under 2 weeks
Under 2 weeks
7€00
Raccord bicône "T" tuyau 8 mm.
Raccord en T acier.
3 bicônes ø 6/8 mm.
Vendu à l'unité.

A propos de la traduction Douille de renfort tube 8 mm

CB10052
 
 
In stock
In stock, shipped tomorrow
09 December 2016
3€00
Douille/fourreau de renfort tube 8 mm.
Pour tube 6/8 recuit.
A insérer dans un tuyau de cuivre.
Permet d'éviter l'écrasement lors du serrage du bicône.
Vendue à l'unité.

A propos de la traduction Douille de renfort tube 10 mm

CB10053
 
 
In stock
In stock, shipped tomorrow
09 December 2016
1€99
Douille/fourreau de renfort tube 10 mm.
Pour tube 8/10 recuit.
A insérer dans un tuyau de cuivre.
Permet d'éviter l'écrasement lors du serrage du bicône.
Vendue à l'unité.
Stop Affaire ! 1.99 € TTC au lieu de 3.00 € TTC, dans la limite des stocks disponibles.

A propos de la traduction Kit de 10 joints P2 raccords 20x150

CB10054
 
 
In stock
In stock, shipped tomorrow
09 December 2016
3€50
Kit de 10 joints P2 raccords 20x150.
Pour raccords 20 x 150.
Vendus par 10.

A propos de la traduction Kit 10 joints raccord bouteille

CB10056
 
 
In stock
In stock, shipped tomorrow
09 December 2016
3€00
Kit 10 joints raccord bouteille.
Pour bouteille de gaz.
Vendus par 10.

A propos de la traduction Raccord tétine courte 8 mm

CB10058
 
 
In stock
In stock, shipped tomorrow
09 December 2016
5€00
Raccord tétine courte 8 mm.
Tétine mâle diam 8 mm pour raccords bicônes.
Vendu à l'unité.

A propos de la traduction Raccord tétine 57 mm - P327

CB10060
 
 
In stock
In stock, shipped tomorrow
09 December 2016
6€00
Raccord tétine P327, longueur 57 mm pour multi-vanne.
Tétine 8 mm pour transformer une sortie olive en sortie tétine.
Vendu à l'unité.

A propos de la traduction Raccord gaz tétine T

CB10064
 
 
In stock
In stock, shipped tomorrow
09 December 2016
6€00
Raccord gaz tétine T.
Pour tuyau de diamètre 10 mm.

Montage interdit dans les caravanes.

A propos de la traduction Bride US pour gaine chauffage 65 mm

CB10130
 
 
Under 2 weeks
Under 2 weeks
2€40
Pour gaine de chauffage UR & KR diam 65 mm.
Vendu à l'unité.

A propos de la traduction Bride AZS pour gaine AZR 22 mm

CB10131
 
 
In stock
In stock, shipped tomorrow
09 December 2016
2€00
Pour gaine de chauffage AZR diamètre 22 mm.
Vendue à l'unité.

A propos de la traduction Bride ZRS pour gaine chauffage 80 mm

CB10132
 
 
In stock
In stock, shipped tomorrow
09 December 2016
1€99
Pour gaine de chauffage VR80 & ZR80 diam 80 mm.
Vendu à l'unité.
Stop Affaire ! 1.99 € TTC au lieu de 3.00 € TTC, dans la limite des stocks disponibles.

A propos de la traduction Etrier de fixation 17 mm pour vannes et raccords gaz

CB10276
 
 
Under 2 weeks
Under 2 weeks
6€00
Patte de fixation.
Pour vannes et raccords 6 mm, 8 mm et 10 mm.


You do not find a product ? Altura