mon compte

My account

Sign In

mon compte

My basket

0 items 0.00

Items present in your basket (0 items) :
Total : 0.00
See my basket

RESEARCH BASED ON YOUR VEHICLE OR ON KEYWORDS


Back to

Soundproofing plates & foams - insulator & sound-reducing - Porsche 911 & 912


Number of parts : 3

A propos de la traduction 1 sealing foam film - 100 cm x 58 cm

UA01895
Customers' note : 33 votes
33 notas
In stock
In stock, shipped
28 May 2018
15€00
Sealing and soundproofing of door trims.
White polyethylene foam
Thickness: 1.5 mm
Dimensions: 100 cm x 58 cm
Thermal insulation of doors.
Recommended for air conditioned vehicles.

Unroll the film on the adhesive side against the section to be treated andcut to the required size

A propos de la traduction 20 x 50 cm black and odourless soundproofing

UA11005
Customers' note : 23 votes
23 notas
In stock
In stock, shipped
28 May 2018
6€00
Applications:
Vehiclechassises and interiors, electrical household goods, shipbuilding, machines, walls, air ducts, soundproofed doors, etc.

Instructions: Clean the surface of any dust, grease, oil and water to ensure bonding is as effective as possible. Carefully press down on the full surface. If cold bonding,the temperature should not be below 15°C. The self-adhesive is made from of a high-quality acrylic system. Using a blowtorch, heat and apply flat fora perfect application.

Dimensions: 20 x 50 cm
Weight = 5 kg/ m (+ - 0.3) = density of approximately 1.82 g/cm³!
Flash point > 230°C, the heat should be applied for 2 hours at 120°C.
Flame resistant in accordance with DIN 75200

A propos de la traduction Set of 5 black and odourless 20 x 50 cm sound insulators

UA11010
Customers' note : 90 votes
90 notas
In stock
In stock, shipped
28 May 2018
27€00
Applications:
Vehicle chassises and interiors, electrical household goods, shipbuilding, machines, walls, air ducts, soundproof doors, etc.

Instructions: Clean the surface of any dust, grease, oil and water to ensurebonding is effective as possible. Carefully press down on the full surface. If cold bonding, the temperature should not be below 15°C. The self-adhesive is made up of a high quality acrylic system. Using a blowtorch, heat and apply flat for a perfect application.

Dimensions: 20 x 50 cm
Weight = 5 kg / m (+ - 0.3) = density of approximately 1.82 g/cm³!
Flash point > 230°C, the heat should be applied for 2 hours at 120°C.
Flame resistant in accordance with DIN 75200
You save 3.00 € C/IVA by buying this kit !


You do not find a product ? Altura