MEYLE HD 110mm reinforced transmission selector for BMW 3 Series E90 E90LCI E91 E91LCI E92 E92LCI E93 and E93LCI (02/2004-10/2013) - with hardware

Details about : MEYLE HD 110mm reinforced transmission selector for BMW 3 Series E90 E90LCI E91 E91LCI E92 E92LCI E93 and E93LCI (02/2004-10/2013) - with hardware

Reinforced 110mm MEYLE HD transmission selector, located between gearbox output and driveshaft , for BMW 3 Series E90, E90LCI Sedan, E91, E91LCI Touring, E92, E92LCI Coupé, E93 and E93LCI Cabriolet with manual gearbox only:

E90 Sedan :
- 318i 4cyl 2.0L 129hp from 08/2004 to 08/2008 (engine code N46B20)
- 320i 4cyl 150hp from 02/2004 to 09/2008 (engine code N46B20)
- 320si 4cyl 173hp from 09/2005 to 08/2006 (engine code N45B20S)

E90LCI Sedan :
- 318i 4cyl 2.0L 143hp from 05/2008 to 10/2011 (engine code N43B20)
- 320i 4cyl 170hp from 05/2008 to 10/2011 (engine code N43B20)

E91 Touring :
- 318i 4cyl 2.0L 129hp from 09/2005 to 08/2008 (engine code N46B20)
- 320i 4cyl 150hp from 03/2004 to 08/2008 (engine code N46B20)

E91LCI Touring :
- 318i 4cyl 2.0L 143hp from 05/2008 to 05/2012 (engine code N43B20)
- 320i 4cyl 170hp from 07/2007 to 05/2012 (engine code N43B20)

E92 Coupé :
- 320i 4cyl 170hp from 09/2006 to 02/2010 (engine code N43B20)

E92LCI Coupé :
- 320i 4cyl 170hp from 11/2008 to 06/2013 (engine code N43B20)

E93 Cabriolet :
- 320i 4cyl 170hp from 09/2005 to 02/2010 (engine code N43B20)

E93LCI Cabriolet :
- 320i 4cyl 170hp from 09/2009 to 10/2013 (engine code N43B20)

ATTENTION: Not suitable for models with automatic gearbox!

Screws and bolts included (6 M10X50-10.9 screws and 6 M10 self-locking hex nuts).

Dimensions:
- Mounting centres: 78mm (6 holes)
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Original reference:

26 11 1 225 624