MTS TECHNIK Street Series threaded combination kit for BMW 3 Series E39 Touring 4 and 6 cylinders (05/1995-12/2003) - with level adjuster

Details about : MTS TECHNIK Street Series threaded combination kit for BMW 3 Series E39 Touring 4 and 6 cylinders (05/1995-12/2003) - with level adjuster

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 Series E39 Touring 4 and 6 cylinders with standard or M-Technic chassis and self-levelling (rear air suspension):

- 520i 150hp phase 1 from 09/1996 to 08/1998 (engine code M52B20)
- 520i 150hp phase 1 from 09/1998 to 08/2000 (engine code M52B20TU)
- 520i 150hp phase 2 from 09/2000 to 07/2001 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B22)
- 523i 2.5L 170hp phase 1 from 09/1996 to 08/1998 (engine code M52B25)
- 523i 2.5L 170hp phase 1 from 09/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 from 11/1999 to 08/2000 (engine code M54B25)
- 525i 192hp phase 2 from 09/2000 to 12/2003 (engine code M54B25)
- 528i 193hp phase 1 from 05/1996 to 08/2000 (engine code M52B28)
- 530i 231hp phase 1 from 11/1999 to 08/2000 (engine code M54B30)
- 530i 231hp phase 2 from 09/2000 to 12/2003 (engine code M54B30)
- 540i V8 4.4L 286hp phase 1 from 09/1996 to 08/1998 (engine code M62B44)
- 540i V8 4.4L 286hp phase 1 from 09/1998 to 08/2000 (engine code M62B44TU)
- 540i V8 4.4L 286hp phase 2 from 09/2000 to 12/2003 (engine code M62B44TU)
- 520d 4 cyl 136hp phase 1 from 06/1999 to 08/2000 (engine code M47D20)
- 520d 4 cyl 136hp phase 2 from 09/2000 to 09/2003 (engine code M47D20)
- 525d 163hp phase 1 from 06/1999 to 08/2000 (engine code M57D25)
- 525d 163hp phase 2 from 09/2000 to 12/2003 (engine code M57D25)
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 from 02/1998 to 08/2000 (engine code M57D30)
- 530d 193hp phase 2 from 09/2000 to 12/2003 (engine code M57D30)

ATTENTION: Not suitable for models without level control (standard rear suspension), or with xenon headlights (option S522A), or with EDC electronically-controlled suspension!

Kit includes :
- 2 twin-tube gas-hydraulic front shock absorbers, adjustable from -20mm to -70mm with springs
- 2 rear twin-tube gas-hydraulic shock absorbers for lowering from -10mm to -40mm
(Lowering values given as an indication with standard chassis as reference)
- 2 front shock absorber stops
- 2 adjustable rear leveling sensor links (left and right)
- Adjustment wrenches

The stop, protective tube and bearing for each rear shock absorber are not supplied (you can reuse your original parts if their condition permits, although we recommend replacing them with new ones).

As a guarantee of reliability, this MTS Technik kit is assembled with main springs manufactured by EIBACH. The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
shock absorber bodies are galvanized for corrosion resistance and long service life.

INFORMATION: Calibration of the leveling sensors is required after installation (see installation instructions).
Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E39 the very best, with a top-quality MTS TECHNIK kit!