Filter results
Validate filters
23,65 €
ATIComplete set of 12 cylinder head screws for BMW 3 series E46 with 4 cylinder gasoline engine from 01/2001 to 08/2006:
E46 Sedan:
- 316i 4cyl 115hp phase 2 from 05/2001 to 02/2004 (engine code N42B18)
- 316i 4cyl 115hp phase 2 f...
Only 2 in stock
Only 2 in stock
Delivery mode
Collect at store Wambrechies (France) : Free.
Home delivery : on estimate.
Sent today by MECATECHNIC if ordered before 15h00
Description Product
Complete set of 12 cylinder head screws for BMW 3 series E46 with 4 cylinder gasoline engine from 01/2001 to 08/2006:
E46 Sedan:
- 316i 4cyl 115hp phase 2 from 05/2001 to 02/2004 (engine code N42B18)
- 316i 4cyl 115hp phase 2 from 09/2003 to 01/2005 (engine code N46B18)
- 318i 4cyl 143hp phase 2 from 03/2001 to 03/2004 (engine code N42B20)
- 318i 4cyl 150hp phase 2 from 09/2003 to 02/2005 (engine code N46B20)
E46 Touring:
- 316i 4cyl 115hp phase 2 from 10/2001 to 02/2004 (engine code N42B18)
- 316i 4cyl 115hp phase 2 from 10/2003 to 07/2005 (engine code N46B18)
- 318i 4cyl 143hp phase 2 from 12/2000 to 02/2004 (engine code N42B20)
- 318i 4cyl 150hp phase 2 from 10/2003 to 07/2005 (engine code N46B20)
E46 Compact:
- 316ti 4cyl 115hp phase 1 from 01/2001 to 03/2003 (engine code N42B18)
- 316ti 4cyl 115hp phase 2 from 04/2003 to 02/2004 (engine code N42B18)
- 316ti 4cyl 115hp phase 2 from 09/2003 to 12/2004 (engine code N46B18)
- 318ti 4cyl 143hp phase 1 from 03/2001 to 03/2003 (engine code N42B20)
- 318ti 4cyl 143hp phase 2 from 04/2003 to 02/2004 (engine code N42B20)
- 318ti 4cyl 150hp phase 2 from 09/2003 to 12/2004 (engine code N46B20)
E46 Coupe:
- 318ci 4cyl 143hp phase 1 from 12/2000 to 02/2004 (engine code N42B20)
- 318ci 4cyl 150hp phase 2 from 10/2003 to 05/2006 (engine code N46B20)
E46 Convertible:
- 318ci 4 cyl 143hp phase 1 from 03/2001 to 02/2004 (engine code N42B20)
- 318ci 4 cyl 150hp phase 2 from 09/2003 to 08/2006 (engine code N46B20)
WARNING: Supporting washers not supplied!
We recommend that you replace the head screws of your engine block after opening for maintenance and/or repair (head gasket replacement type..). Indeed, these screws require a specific tightening procedure and cannot be reused upon reassembly.
Original reference:
11 12 7 511 534
Thread
6x 8 mm at 1.25 pitch, 6x 10 mm at 1.5 mm pitch
Length (mm)
3x 95, 3x 125, 6x 170
End cap (mm)
6x Torx E10, 6x Torx E12
Customer review
No commentary about the product
With Trusted Shops, we can improve directly thanks to your comments posted on the MECATECHNIC website
Your questions
Vehicle compatibility