TOOLATELIER pressure sander - Second choice

This TOOLATELIER pressure sandblaster comes complete with sandblasting valve, 4 ceramic nozzles, plastic funnel for abrasive loading, 2.5 m abrasive hose, pressure relief valve, pressure gauge and filter with pressure regulator.

Consisting of filter regulator and CE-approved tank.

Maximum working pressure: 8 bar

Capacity: 38L

Air consumption at 5.5 bar and recommended compressor size to be used on the blaster :

Nozzle ------ Flow ------ Recommended compressor

2mm ------ 200L/min----- 2-3 HP

2.5mm ------ 300L/min ----- 5.5 HP

3mm ------ 420L/min ----- 7.5 CV

3.5mm ------ 710L/min ----- 10 CV

Ceramic nozzles should not be used with alumina-based abrasives (aluminum oxide), silicon carbide (ceramic made almost exclusively from man-made minerals) or noble corundum.

To avoid damaging the blasting valve, it is important to use it with 100% opening, which will reduce the risk of it being pierced. ATTENTION: partial opening will damage the valve!

French instructions in PDF file.

No returns, no exchanges, the sandblaster has already been used for test purposes only.

Product remains in new condition.