Fasteners and hardware

Sealing compound for joints, durable elastic and resistant to
elevated temperatures, for engine and transmission

Resistance: -50°C à +250°C, temporary spikes to +300°C.

ELRING gasket kit
Size of sheets (mm): 300 x 210

Contains:
- 1 FW522 sheet, 1.25 mm thick (cylinder head and exhaust gaskets)
Reinforcedgasket with metal armature Resistant up to temperatures of 250 °C
- 1 EWP207gasket, 0.75 mm thick (gearbox and final drive, rocker cover gaskets, etc.). Resistant to temperatures greater than 200 °C and pressures of 50 bar.
- 1 ABIL gasket, 0.25 mm thick (flat sealing, oil sump, cooling circuit,carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 0.5 mm thick (flat sealing, oil sump, cooling circuit, carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 0.75 mm thick (flat sealing, oil sump, cooling circuit, carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 1.0 mm thick (flat sealing, oil sump, cooling circuit, carburettor,etc.) Resistant to temperatures greater than 100 °C.

Sikaflex-552 AT (300 ml) is a flexible, single-component hybrid adhesive for high-performance structural bonding.

It is capable of withstanding high dynamic stresses.

Example: decorative bodywork tabs, sheet metal joints...

This Sikaflex 552 AT joint is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the ISO 9001 quality assurance system and the ISO 14001 environmental management system.

Sikaflex-552 AT is ideal for structural assemblies subject to dynamic stresses.

Good adhesion to all materials normally used in body shops, such as metal primers, primers, metals and enamelled synthetics.

The products :

- Advanced hybrid technology
- Good adhesion to a wide range of substrates without primer
- Abrasion and impact resistant
- Withstands high dynamic stress
- High initial strength
- Fast curing
- Resistant to aging
- Low odor
- Non-corrosive
- Free from isocyanates and silicone solvents

Heavy-duty bonding compound (300 ml). 
Sikaflex-552 AT is based on Sika's hybrid polyurethane technology (STP) and contains no isocyanates.
Recommended for mounting exterior elements requiring strong adhesion.
Recommended for the installation of spoilers, solar panels, etc. and all other objects in contact with bodywork.
Sikaflex-552 AT can be painted with most body enamels (including water-based enamels).
Pretreat with SIKA CLEANER 205.
Color: white.
Cartridge: 300ml.

DEKAPHON 3750 Black underbody treatment protects and soundproofs the underbody and wheel arches of your car, caravan, van or motorhome. Resistant to water andhumidity, it also impregnates wood.

Substrates: plywood, wood.

Other features:
- Fast-drying.
- Environmentally friendly.
- Protection against recutting.
- Excellent resistance to erosion, water spray and abrasion.

Aerosol: 500ml.

Tightening clamp, 100% stainless steel. This clamp does not damage the hose as the tightening notches are only on the external section of the clamp.

The sealantmakes easy the mounting and keeps the exhaust system tightness of your vehicle. Under the hot effect, the sealant becomes hard stopping the emission ofexhaust gas.
It is ressistant up to 1000°c

Sikaflex 552 AT is a high-performance structural soft single-component hybrid adhesive.

It is capable of resisting high dynamic loads.

Example: decorative strips on the bodywork, sheet metal panel joints, etc.

This Sikaflex 552 AT sealant is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the quality assurance system ISO 9001 and the environmental management system ISO 14001.

Sikaflex-552 AT allows structural assemblies that are subject to dynamic loads to be joined.

Good adherence to all materials commonly used in bodywork workshops, such as metal primers, primers, metals and enamelled synthetic materials.

Product advantages:

- Advanced hybrid technology
- Good adherence to a wide range of different unprimed supports
- Abrasion and impact resistant
- Resistant to high dynamic loads
- High initial resistance
- Fast hardening
- Resistant to ageing
- Emits little odour
- Not corrosive
- Does not contain isocyanates, silicone solvents or PVC

Colour: black
Contents: 300 ml

LOCTITE 243 normal threadlocker is a blue, medium-strength threadlocking adhesive suitable for non-permanent locking andsealing of threaded assemblies.
Its composition makes it ideal for sealing and securing screws, nuts, bolts and studs which may loosen under the effect of shock or vibration and require regular disassembly (use LOCTITE 271 red threadlocker for parts requiring permanent braking).

Compatible with all metals, including stainless steel, aluminum and plated surfaces, it cures in the absence of air when confined between metal surfaces with little clearance.

Advantages :
- Easy to use
- Efficiently secures bolts and screws
- Suitable for regular disassembly
- Tolerates slight contamination by industrial oils (engine oils, fuels, etc.)

Please observe all safety precautions.

Nut for exhaust manifold, alloy
Size: M8 x 1.25
For 12mm wrench
This thinner nut allows easier tightening in tight spaces.
Sold individually

Black "Porsche-type" aluminum captive wheel nut (closed) for M14 x 1.5 studs with spherical seat.

Thread: M14 x 1.5
Seat: spherical
Key opening: 19 mm
Length: 32 mm

DEKAPHON 958 Underbody Treatment Black (1L) protects and soundproofs the underbody and wheel arches of your car, caravan or motorhome.
Resists water and humidity. Also protects chassis, mudguards, side skirts and wheel arches. Water-based product.

Brush or spray application.
Bottle size: 1L.

Contents:

- 12 straight fuel couplings
- Nylon pipe in 3 internal diameters: 2 x 6 mm x 340 mm, 4 x 8 mm x 340 mm, 2 x 10 mm x 340 mm
- Rubber fuel hoses: 3 x 7.5 mm (internal diameter) x 200 mm, 1 x 12 mm (internal diameter) x 200 mm
- Twin ear clips: 2 x 15-18 mm, 4 x 17-20 mm

To be able to fit the connectors and hoses, you will need product TB00992.

SIKAFLEX 252 from SIKA is a strong bonding putty . In the world of motorhomes, caravans and vans, it is recommended for mounting exterior components requiring strong adhesion: roof extensions, spoilers, solar panels, roof racks, etc...
Preliminary preparation with SIKA CLEANER 205 - 250 ml
Cartridge: 300 ml
Color: white.
Sold individually.

Sold individually

- screw sizes
40 pcs. 3 x 8 mm
20 pcs. 4 x 16 mm
15 pcs. 5 x 12 mm
10 pcs. 6 x 20 mm
- 85 pcs. special U-Type Cushion in different
sizes and shapes

in plastic storage case

O-ring assortment from 3 to 22 mm, box of 225 rings.

Sorted in 18 inner-diameter sizes:

3 x 1 / 4 x 1 / 4.5 x 2 / 5 x 2 / 6 x 2 / 6 x 2.5 / 6 x 3 / 7 x 2 / 8 x 2 / 9 x 2 / 10 x 2 / 12 x 3 / 13 x 3 / 14 x 2.5 / 17 x 2.5 / 18 x 4 / 20 x 2 / 22 x 2 mm

Gaskets resistant to petrol, oil and hydrocarbons.

Rubber-lined p clip sizes:

- 8 pieces => Ø 6 mm
- 4 pieces => Ø 8 mm
- 2 pieces => Ø 10 mm
- 2 pieces => Ø 13 mm
- 2 pieces => Ø 16 mm

Material: zinc-plated steel

TOPRAN grille and spoiler mounting clip .

Le silicone autojoint d'étanchéité LOCTITE SI 5940 est un produit qui polymérise sous l'action de l'humidité de l'air pour former un élastomère de silicone de collage, flexible, étanche et résistant aux huiles. Ce mastic est généralement proposé pour des applications d'étanchéité et de collage à usage général, sous la forme de joint avec capacité de prise en jeux ou comme JPP (joint polymérisé sur pièce). Il adhère sur les surfaces propres métalliques, le verre, tous types de bois non gras, les résines silicones, les caoutchoucs silicones réticulés, les céramiques, les fibres naturelles ou synthétiques et la plupart des plastiques et des surfaces peintes .
Ce produit est utilisé typiquement pour des applications ayant des températures de service entre -50°C et +200 °C et pouvant par intermittence atteindre +220°C.

ATTENTION : Ne pas utiliser comme joint d'étanchéité sur culasse !

Avantages :
- Prêt à l'emploi.
- Forme une couche étanche et souple.
- Résiste à des températures de -50°C à +200°C en continu, +220°C en pointe.
- Colle sur la plupart des matériaux tels que le verre, les métaux, les céramiques, les composites et la plupart des plastiques.

Merci de respecter les précautions d'usage.