Seal

ELRING gasket kit
Size of sheets (mm): 300 x 210

Contains:
- 1 FW522 sheet, 1.25 mm thick (cylinder head and exhaust gaskets)
Reinforcedgasket with metal armature Resistant up to temperatures of 250 °C
- 1 EWP207gasket, 0.75 mm thick (gearbox and final drive, rocker cover gaskets, etc.). Resistant to temperatures greater than 200 °C and pressures of 50 bar.
- 1 ABIL gasket, 0.25 mm thick (flat sealing, oil sump, cooling circuit,carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 0.5 mm thick (flat sealing, oil sump, cooling circuit, carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 0.75 mm thick (flat sealing, oil sump, cooling circuit, carburettor, etc.) Resistant to temperatures greater than 100 °C.
- 1 ABIL gasket, 1.0 mm thick (flat sealing, oil sump, cooling circuit, carburettor,etc.) Resistant to temperatures greater than 100 °C.

O-ring assortment from 3 to 22 mm, box of 225 rings.

Sorted in 18 inner-diameter sizes:

3 x 1 / 4 x 1 / 4.5 x 2 / 5 x 2 / 6 x 2 / 6 x 2.5 / 6 x 3 / 7 x 2 / 8 x 2 / 9 x 2 / 10 x 2 / 12 x 3 / 13 x 3 / 14 x 2.5 / 17 x 2.5 / 18 x 4 / 20 x 2 / 22 x 2 mm

Gaskets resistant to petrol, oil and hydrocarbons.

Ideal for sealing holes of the following sizes:

- 10 caps: Ø 10.0mm
- 10: Ø 13.4mm
- 10: Ø 13.5mm
- 8: Ø 19.4mm
- 10: Ø 19.5mm
- 10: Ø 22.2mm

Rubber seals allow pipe or wire to pass through frame or metal wall.

Outside diameter: 18mm
Inside diameter: 4mm

This assortment of 180 TOOLATELIER rubber grommets is ideal for automotive and motorcycle use. Very practical when restoring electrical circuits to avoid damage to wires/cables at sharp points.

Available in 8 different diameters.

Quantity / Inside Ø / Cable Ø / Outside Ø :

5 : 22 mm / 15 mm / 26 mm
5 : 15.5 mm / 12 mm / 19 mm
5: 28 mm / 17 mm / 32 mm
20: 12 mm / 11 mm / 15 mm
25: 11 mm / 9 mm / 15 mm
40: 10 mm / 6 mm / 13 mm
40: 7.5 mm / 5 mm / 10 mm
40: 6 mm / 3 mm / 8 mm

Protective rubber gasket to fill a 26mm diameter hole and protect your vehicle's electrical wires.

For feeding wires or a pipe (max 15 mm) through a metal wall (1 mm) in complete safety.
- total thickness 18 mm
- max.overlap diameter 26 mm
- 23mm inner diameter

Rubber gasket to fill a 13mm-diameter hole.

Protects wire or pipe up to 9mm in diameter when passing through a 2mm-thick metal wall.

Rubber bulkhead fitting

Internal Ø: 19 mm
Sold individually

Rubber bulkhead fitting

Internal Ø: 16 mm
Sold individually

Sizes:

Ext. Ø: 24 mm
Int. Ø: 18 mm
Thickness: 2 mm

- suitable for oil drain plugs and banjo bolts
- 5 pieces each of the following sizes:
- 3 / 16 x 25/64 x 1 / 32
- 15/64 x 25/64 x 1 / 32
- 17/64 x 25/64 x 1 / 32
- 5 / 16 x 15/32 x 1 / 32
- 25/64 x 5 / 8 x 1 / 32
- 13/32 x 21/32 x 3 / 64
- 27/64 x 21/32 x 3 / 64
- 15/32 x 25/32 x 3 / 64
- 31/64 x 25/32 x 3 / 64
- 35/64 x 45/64 x 1 / 32
- 35/64 x 25/32 x 3 / 64
- 37/64 x 25/32 x 5 / 64
- 5 / 8 x 55/64 x 5 / 64
- 41/64 x 15/16 x 5 / 64
- 11/16 x 15/16 x 5 / 64

in plastic storage case

Resistant to acid, fuel, heat and oil.

Sizes:

- 20 pcs Ø 1/8" - 20 pcs Ø 3/16"
- 18 pcs Ø 1/4" - 23 pcs Ø 5/16"
- 23 pcs Ø 3/8" - 23 pcs Ø 1/2"
- 14 pcs Ø 3/8" - 13 pcs Ø 7/16"
- 14 pcs Ø 1/2" - 13 pcs Ø 9/16"
- 14 pcs Ø 5/8" - 14 pcs Ø 11/16"
- 13 pcs Ø 3/4" - 14 pcs Ø 13/16"
- 13 pcs Ø 7/8" - 10 pcs Ø 3/4"
- 10 pcs Ø 13/16" - 10 pcs Ø 7/8"
- 10 pcs Ø 5/16" - 10 pcs Ø 1"
- 10 pcs Ø 1-1/16" - 10 pcs Ø 1-1/8"
- 10 pcs Ø 1-3/16" - 10 pcs Ø 1-1/4"
- 10 pcs Ø 1-5/16" - 10 pcs Ø 1-3/8"
- 10 pcs Ø 1-7/16" - 10 pcs Ø 1-1/2"
- 10 pcs Ø 1-5/8" - 10 pcs Ø 1-3/4"
- 10 pcs Ø 1-7/8" - 10 pcs Ø 2"

Sizes :

O.D.: 20 mm
Inner Ø: 14 mm
Thickness: 1 mm

Per piece

Rubber gasket to protect wire or pipe when passing through a wall.

Outside diameter: 54mm
Inside diameter: 40mm
Thickness: 18mm

Rubber grommet for bodywork.

Maximum wire diameter: up to 5mm
Outside diameter: 36mm
Thickness: 20mm

- various gaskets manufactured from rubber, fibre and
klingerith
- for sanitation facilities etc.

in plastic storage case

- especially suitable for oil drain plugs
- suitable for all popular vehicles
- sizes:
5x 9x1,0 8x14x1,5 12x16x1,0 14x20x1,5 18x24x1,5 22x29x1,5
6x10x1,0 9x14x1,0 12x16x1,5 14x20x2,0 20x24,5x1,5 24x29x1,5
6x12x1,0 10x14x1,0 12x18x1,5 16x20x1,5 20x24,5x0,8 24x32x2,0
8x12x1,0 10x14x1,5 13x18x1,0 16x22x1,5 19x26x2,0 26x34x2,0
8x14x1,0 10x16x1,0 14x18x1,5 18x22x1,5 22x27x1,0 28x36x2,0

in plastic storage case

- made from HNBR: especially for air conditioners etc.
- various sorted sizes, int. diameter:
3 - 4 - 4,5 - 5 - 6 - 7 - 8 - 9 - 10 - 12 -
13 - 14 - 17 - 18 - 20 - 22 mm

in plastic storage case

- for oil drain plugs
- 10 pieces each of the following sizes:
int. diam. x ext. diam. x thickness:
5x10x1 mm, 6x10x1 mm, 7x10x1 mm
8x12x1 mm, 10x16x1 mm, 10,5x17x1,5 mm
11x17x1,5 mm, 12x10x1,5 mm, 12,5x20x1,5 mm
14x18x1 mm, 14x20x1,5 mm, 15x20x2 mm
16x22x2 mm, 16,5x24x2 mm, 17,5x24x2 mm

in plastic storage case

These joints enable the sealing of injectors on common rail Diesel (CDI) injection systems

Sizes (10 pcs in each size):

External diameter x internal diameter x thickness

13.8 x 7.3 x 1.4 mm
14.6 x 7.5 x 1.3 mm
14.6 x 7.5 x 3.0 mm
15.0 x 7.0 x .0 mm
15.0 x 7.5 x 1.0 mm
15.0 x 7.5 x 1.5 mm
15.0 x 7.5 x 2.0 mm
15.0 x 7.5 x 2.5 mm
15.0 x 7.5 x 3.0 mm
15.5 x 7.5 x 2.0 mm
16.0 x 7.5 x 1.5 mm
16.0 x 7.5 x 1.7 mm
16.0 x 7.5 x 2.0 mm
16.4 x 7.5 x 2.0 mm
20.0 x 9.4 x 0.9 mm