Braking

This 4.75 mm (3/16") TOOLATELIER 7.62 m long rigid copper hose is ideal for rebuilding your Belle's braking system.

It is used by professionals and private individuals alike.

We recommend the TA00112 collar press flare as well as the UO69599 female couplings and UO69597 male couplings for the best possible results.

Length: 25ft (7.62 m)
Ext. size: 4.75 mm (3/16")
Inner size: 3.28 mm
Material: 100% copper

This set of galvanized male and female nut fittings are used on brake systems with rigid hoses in size 4.75 mm (3/16").

It covers both metric and UNF sizes.

Composition:

- 50 short male fittings: 10 mm x 1 mm
- 15 short female fittings: 10 mm x 1 mm
- 20 long male fittings with integral thread: 10 mm x 1 mm
- 20 long male fittings: 10 mm x 1 mm
- 10 female connections: 24 TPI x 3/8" UNF
- 20 long male fittings: 24 TPI x 3/8" UNF

Pure copper brake pipe
(0.9 mm - 20 SWG)
External diameter: 4.76 mm
Interior diameter: 2.96 mm
10 metre roll

Répartiteur en T à 3 raccords pour le branchement des tuyaux de frein rigides et des durites flexibles.

This kit with 5 connectors is ideal for rigid pipes, size 4.75 mm (3/16").

It is fitted without a flare on copper, cupro-nickel and steel pipes.

Universal rubber brake hose

Length 35cm
Fittings: Male - Female
Thread M10x100

Sold individually

The brake bleed screw cap is a small accessory found at the end of the bleed screw on brake systems. Its main purpose is to protect the bleed screw from dirt, moisture and oxidation. In addition to this protection, it helps maintain brake system pressure and prevent brake fluid leakage during servicing.This protective rubberplug is suitable for bleed screws on wheel cylinders, brake calipers and clutch actuators.

10 mm x 1 mm SAE-typemale brake fitting for 3/16" rigid pipe
Size: 10 mmConnection: 3/16" (4.76 mm)Connection type: malePitch: 1 mmOverall length 16.5 mm, thread length 11.5 mmRange: SAE
Sold individually

A screw plug can be used to plug a brake fluid outlet on a brake master cylinder, when adapting or depending on the characteristics of the master cylinder you're using.

Size: 10 x 1.0 mm
Connector: T
Type of connector: female-female

Sold individually

Universal rubber brake hose

Length 45cm
Fittings: Male - Female
Thread M10x100

Sold individually

Universal rubber brake hose

Length 15cm
Fittings: Female - Female
Thread M10x100

Sold individually

Thread length: 11 mm
Total length: 37 mm

1 mounting hole
For 1 brake hose

Size: 24TPI
Connector: 3/16" (4.76 mm)
Type of connector: male
Thread: 3/8" UNF

Sold individually

Size: 3/16" (4.76 mm)
Connection type: female

Sold individually.

Thread: M6 x 1.0
Length of the part in the stirrup: 17 mm

Diameter: 12 mmConnection: 3/16" (4.76 mm)Connection type: malePitch: 1 mmKey size: 1/2Overall length 20 mm, thread length 14.5 mmSold individually

Size: 24TPI
Connector: 3/16" (4.76 mm)
Type of connector: female-female
Thread: 3/8" UNF

Sold individually

Thread: M6 x 1.0
Length of the part in the caliper: 22 mm