Anti-sounds for brake pads

Rear brake pads for Seat Ibiza 6L:

- All models from 2002 with brake codes 1KK and 1KT in LUCAS mounting (solid brake discs 239x9mm)-> from chassis number 6K-X-290 000

Brake pad set for 2 wheels.

Front brake pad damping plate for Porsche 944 S2 :

- 944 3.0 S2 - 211 hp from 1989 to 1991

Diameter : 40 mm
Fitted on the calliper's upper pistons

Number required per vehicle : 4

Sold per unit

Noise-reducing rear brake pads for Porsche 944 Turbo and Turbo S from 1986 to 1989 :
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to chassis 95Z KN1 00218
The noise suppressant is sold individually and 4 quantities are required per vehicle.

Front brake pad mounting springs for Volkswagen Golf 5 Sedan and Variant:

- All petrol and diesel models from 10/2003 to 07/2009 with ATE mounting (brake codes 1LK and 1LM)

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

Rear brake pad mounting springs for Volkswagen Golf 5:

- R32 3.2L V6 4Motion 250hp from 08/2005 to 06/2008 with LUCAS mounting and 310x22mm ventilated brake discs spaced 5x112 apart.

Thisaccessory kit for therear axle includes 4 retaining springs (2 per caliper).

This anti-noise parking brake pad spring will reduce squeaking and allow the pad to hold securely in place.
It is compatible with Citroën DS parking brake pads from 1965.
Compatible models:
DS 19/20 Sedans (1985cc) - (1966-1975)DSuper/DSpécial (1985cc) - (1972-1975)DS 20 Estate (1985cc) - (1970-1975)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)DS 21 Estate (2175cc) - (1970 to 1972)DS 23 Sedans (2347cc) - (1973-1975)DS 23 Estate (2347cc) - (1973-1975)

Rear brake pad damping plate for Porsche 911 type 993 :

- 993 3.6 - 272 hp Carrera 4 from 1995
- 993 3.6 - 285 hp Carrera 4 from 1996 to 1998
- 993 3.6 - 285 hp Carrera 4S from 1996 to 1998
- 993 3.6 - 408 hp Turbo from 1995 to 1998
- 993 3.6 - 450 hp Turbo S from 1997 to 1998

Diameter : 28 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4

Sold per unit

Rear brake pad damper plate (anti-noise), diameter 28 mm, for Porsche 986 Boxster S :

- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Mounts on the pistons of the bottom of the caliper

In principle, 4 pellets (2 of 30 mm and 2 of 28 mm) are present by rear caliper (1 pellet per piston).
Before ordering, it is advisable to check on your vehicle, the diameters which are necessary for you according to your options.

Quantity required per vehicle : 4

Sold individually

Rear brake pad mounting kit for Volkswagen Golf 5:

- All petrol and diesel models from 10/2003 to 07/2009 with LUCAS mounting

Thisaccessory kit for therear axle includes all the accessories needed to mount the rear brake pads in the calipers.

Front brake pad damper plate (anti-noise) for Porsche Cayman 987 :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008

Not suitable for ceramicbrake discs

Quantity required per vehicle : 4

Sold individually

Front brake pad damping plate for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

Diameter : 36 mm
Fitted on the calliper's lower pistons

Number required per vehicle : 4

Sold per unit

Suitable for all E21 models (except 323 i) with original ATE assembly

Front brake pad damper plate (anti-noise) for Porsche Boxster 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008

Not suitable for ceramicbrake discs

Quantity required per vehicle : 4

Sold individually

Front brake pad mounting springs for Volkswagen Golf 6 Sedan:

- All petrol and diesel models from 10/2008 to 06/2009 with ATE fitting (brake code 1LM) -> up to chassis number WVWZZZ1KZ9-200000

Thisaccessory kit for thefront axle includes 2 retaining springs (1 per caliper).

Rear brake pad retainer springs for Volkswagen Golf 2 GTI 8S, 16S and G60 with ABS and TRW mounting on 226x10 discs 4x100 centers from 08/1983 to 10/1991.

Complete kit for 2 rear calipers including 4 springs (2 per caliper support).

WARNING: Not suitable for Golf 2 G60 RALLYE!

When replacing the brake pads on your Golf 2, we strongly recommend that you replace their mounting springs, as these no longer fulfil their elastic, vibration-damping role over time, causing noise and whistling under braking.

Rear brake pad mounting springs for Volkswagen Golf 6 Sedan and Variant:

- All petrol and diesel models from 10/2008 to 07/2013 with BOSCH mounting (brake codes 1KS and 1KT)

Thisaccessory kit for therear axle includes 8 retaining springs (4 per caliper).

This anti-noise parking brake pad spring will reduce squeaking and allow the pad to hold securely in place.
It is compatible with Citroën ID parking brake pads from 1965.
Compatible models:Sedan type ID19 - DM, ID19 (P) from 1965Cabriolet type ID19 - DM, ID19 (P) from 1965Series A Sedan type ID19 - DE, ID19 (P) from 1966ID 19/20 Sedans (1985cc) - (1967-1971)ID 19/20 Estate (1985cc) - (1966-1969)ID 21 Estate (2175cc) - (1966-1969)

Rear brake pad muffler for Porsche 928 from 1987 to 1988 :

- 928 S4 5.0 - 320hp (M28.41/M28.42) from 1987 to 1988

The noise suppressant is sold individually and 4 quantities are required per vehicle.

Rear brake pad mounting springs for Skoda Fabia 6Y:

- All petrol or diesel models with LUCAS/TRW mounting on 232x9mm solid brake discs (brake code 1KK)

Thisaccessory kit for therear axle includes 4 retaining springs (2 per caliper).

Rear brake pad damper plate (anti-noise), diameter 28 mm, for all Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

Sold individually

In principle, 4 pellets (2 of 30 mm and 2 of 28 mm) are present by rear caliper (1 pellet per piston).
Before ordering, it is advisable to check on your vehicle, the diameters which are necessary, for you according to your options.