Servo brake and Accessories

6 mm Inlet/Outlet

8 mm Inlet/Outlet

10 mm Inlet/Outlet

Intake/Output 13 mm
Internal rubber membrane.

Mastervac master cylinder brake booster for VW Combi Bay Window from 01/1974 to 07/1979 from chassis N°2142110466.
A Combi equipped with a brake booster increases the braking force tenfold to ensure safe stopping of the vehicle. Its operation is simple: it assists the driver in applying the brake pedal.
With this quality item (BENDIX mounting), your safety is assured.

Mounting center distance: 72 x 72 mm

Brake booster repair kit for VW Combi Bay Window from 01/1974 to 07/1979.Repair kit includes rubber bellows, retaining spring and plastic end cap.Fitting diameter 18.4 mm.

Mastervac for Citroën ZX

For Citroën ZX gasoline and diesel without ABS

Manufacturing of brake servo reference Citroën 4535.F0 of equivalent quality to the original.

Diameter 203mm
Check your Mastervac reference and dimensions before ordering.

A high quality vacuum servo is a component of the braking system which creates a braking assistance for the driver in order to reduce the effort required during braking. It guarantees safety, as the result is more efficient for a similar braking effort, and the vehicle will be better controlled during the braking phase.
This brake mastervac is suitable for VW Transporter T25 / T3 from 05/1979 to 07/1992.

Sleeve with 90° angle to connect the end of the brake servo depression pipe to the engine intake pipe.

Quantity required per vehicle: 2

Protective seal on brake booster vacuum circuit pipes
Dimensions: 10.5 x 15 x 21 mm. 

For:
- Combi Bay Window, 08/1973 ->07/1979
since chassis no. 214 2000 001->
- Transporter T25/T3, 05/1979 ->07/1992
all models including Syncro (4 x 4).

Suitable for:
- Golf 2 1.6 and 1.8 carbu and GTi from 87 ->92
- Golf 3 petrol

90° sleeve at the end of the brake booster vacuum pipe on inlet pipe of Type 4 engine 1.7L. 8/10mm.
2 parts required, sold per unit.

For Combi Bay Window, with Type 4 engine:
- 1700cc 66hp (CA) 08/1971 ->07/1973
- 1700cc 62hp (CB) 08/1971 ->12/1973
+ 412

Protective gasket on brake booster vacuum circuit hoses for VW LT from 1976 to 1996
Dimensions: 10.5 x 15 x 21 mm.

The 90° bend at the end of the brake booster vacuum hose is an essential part of the Combi's power-assisted braking system. It connects the brake booster vacuum hose to the intake pipe, directing the air flow efficiently and reliably to activate the power braking system. It is often made of rubber or silicone, as these materials offer the flexibility needed to withstand pressure variations and heat, while ensuring a perfect seal.
This 90° bend at the end of the brake booster vacuum hose on the intake manifold of the Type 4 1.8L & 2.0L engine is suitable for Combi Bay Window, with Type 4 engine:- 1800cc 68hp (AP) from 08/1973 to 07/1975- 2000cc 70hp (CJ) from 08/1976 to 07/1979- 2000cc 70hp (GD) from 08/1976 to 06/1977- 2000cc 70hp (GE) from 08/1976 to 06/1979+ 412 :- 1800cc 75hp (AT) from 08/1973 to 07/1974- 1800cc 85hp(AN) from 08/1973 to 07/1974
Need 2 pieces, sold individually.

Vacuum hose with check valve on Mastervac for VOLKSWAGEN Transporter T4 up to 1994 and up to chassis n°70-R-180000, including synchro:
- 2.4 Diesel 78hp (AAB)

ATE brake booster for Volkswagen Golf:
Volkswagen Golf 4:
- 1.4 16V from 10/1997 to 05/2004 (1390 ccm 75hp)- 1.6 from 08/1997 to 05/2004 (1595 ccm 100hp)- 1.6 from 02/2001 to 03/2007 (1598 ccm 101hp)- 1.6 from 08/2000 to 06/2005 (1595 ccm 102hp)- 1.6 16V from 02/2000 to 06/2005 (1598 ccm 105hp)- 1.6 FSI from 01/2002 to 06/2005 (1598 ccm 110hp)- 1.8 from 08/1997 to 06/2005 (1781 ccm 125hp)- 1.8 4motion from 05/1998 to 062005 (1781 ccm 125hp)- 1.8 T from 08/1997 until 06/2005 (1781 ccm 150hp)- 1.8 T GTI from 08/2001 to 06/2005 (1781 ccm 180hp)- 1.9 SDI from 08/1997 to 06/2005 (1896 ccm 68hp)- 1.9 TDI from 09/2000 to 06/2005 (1896 ccm 101hp)- 1.9 TDI from 08/1997 to 05/2004 (1896 ccm 110hp)- 1.9 TDI from 11/2000 to 06/2005 (1896 ccm 130hp)- 1.9 TDI from 05/2000 to 06/2005 (1896 ccm 150hp)- 1.9 TDI 4motion from 09/2000 to 06/2005 (1896 ccm 101hp)- 1.9 TDI 4motion from 11/2000 to 06/2005 (1896 ccm 130hp)- 1.9 TDI 4motion from 02/2000 to 06/2005 (1896 ccm 150hp)- 2.0 from 07/1998 to 05/2004 (1984 ccm 115hp)- 2.0 4motion from 10/2000 to 06/2005 (1984 ccm 115hp)- 2.0 BiFuel from 05/2002 to 05/2003 (1984 ccm 116hp)- 2.3 V5 from 10/2000 to 06/2005 (2324 ccm 170hp)- 2.3 V5 4motion from 10/2000 to 06/2005 (2324 ccm 170hp)- 2.8 VR6 from 03/2002 to 06/2005 (2792 ccm 200hp)- 2.8 VR6 4motion from 03/1999 to 06/2005 (2792 ccm 204hp)- 3.2 R32 4motion from 09/2002 to 06/2005 (3189 ccm 241hp)

Servofrein ou Mastervac avec double membrane,

Pour VW T4 avec dispositif ABS et blocage électronique de différentiel EDS :
uniquement pour les codes freinages PR-1LB et PR-1LU

Joint between servo brake and master cylinder for VW Combi Bay Window from 1968 to 1979.

Mastervac master cylinder brake booster for VW Combi Bay Window from 08/1970 to 12/1973 from chassis no. 2112000001 to no. 2142110465.
A Combi equipped with a brake booster increases braking force tenfold to ensure safe stopping of the vehicle. It operates simply by assisting the driver to depress the brake pedal.
With this quality item, your safety is assured.

mastervac brake booster for Audi A3 8L with left-hand drive only:

- All models with ABS and without ESP (brake codes 1AC, and/or 1AH, and/or 1AJ)

ATTENTION: Not suitable for brake codes 1AT, 1AK and 1AS (vehicle with ESP)!

INFORMATION: 1AC corresponds to ABS. 1AH corresponds to EDS (electronic differential lock). 1AJ corresponds to traction control (ABS/ASR/EDS with electronic locking differential).

To avoid any incompatibility, we advise you to check your vehicle's brake code on the label in your owner's manual and the original part number on your old brake booster before ordering.