Disc brake conversion kit

Complete front disc brake kit:
- 2 discs 4 x 130 mm
- 2 original stubs, offset (-6 cm)
- 2 sets of bearings
- 2 original calipers with pads
- Set of brake pads
- All mounting hardware

for Beetle 1200, 1300, 1500

Complete conversion kit to disc brake 5 x 205 mm drilling
for pivot front axles. Fits on original drum axles, does not fit on offset axles. Kit without extension (original offset).

For VW Beetle

Improves front braking on your Beetle 1302 / 1303
complete kit ready for installation :
- 2 German-quality discs with 4 x 130 mm holes
- 2 sets of German quality bearings
- 2 original calipers with pads
- 2 special brake extension hoses
- 2 "CSP" plates in high-grade machined solid aluminium
for mounting the calipers on your spindle drums.

Not road-approved, for use on closed circuits only.

Complete luxury brake kit: 2 drilled serrated rear discs 4 x 130 mm, 2 forged plates, 2 calipers with pads, 2 handbrake cables length 1804 mm, seals and all necessary hardware.
For VW Beetles and Karmann Ghia type 14 :All models since 08/1967 with :- Long trumpet rear axle- Cardan rear axle
Not approved for road use, for use on closed circuits only.

Complete set: 2 notched rear discs, drilled 4 x 130 mm, 2 Q+ plates, 2 callipers with brake pads, 2 1804 mm long brake cables, the necessary seals and nut and bolts.

For Beetles & Karmann Ghia Type 14:
All versions from 08/1967-> with:
->rear axle with long flared tubes
->rear axle with universal joints

Not type approved for road use, reserved for use on a closed track only.

Complete front disc brake kit, top quality:- 2 German-quality 4 x 130 mm discs- 2 CB Perf USA offset spindles (-6cm)- 2 sets of German bearings- 2 original calipers with pads- Set of brake pads- All mounting hardware
For Beetle 1200, 1300, 1500 and Karmann-Ghia type 14 with ball-jointed front axle since 08/1965 and since chassis No. 116 000 001(not approved).For large-cone steering knuckles.

The EMPI disc brake kit and caliper mounting bracket offer you a top-of-the-range disc braking system for the front axle, using your existing front wheel axles, with virtually zero offset - and no loss of ground clearance. Benefit from the braking power of disc brakes, while securing your rims in 5x205 mm holes without adapters!Kits are supplied complete with master cylinder, brake hoses, wheel bearings, dust caps, seals and all necessary hardware.These kits are compatible only with original drum brake spindles, not with offset spindles.For use with 15" wheels only.Kit includes :- Brake discs with 12x1.5 mm thread- Brake calipers and pads- Caliper mounting brackets- Master cylinder- Original brake hoses- Wheel bearings and grease seals- English screws and mounting instructions- Dust covers
Suitable for VW Beetle and Karmann-Ghia T14 since 06/1968 and since chassis No. 118 857 240 (except 1302 and 1303) as well as 181 models
Not homologated in France - For private use on racetracks only.

Spacer on stub-axle for the following CSP kits:
- VH29000K, VH29001K, VH29002K, VH29005K
- VH29600K, VH29602K
Number required per vehicle: 2

Bearing kit for CSP disc brake kit.
Set for one front wheel:
- 1 innerbearing
- 1 outer bearing
- 1 oil seal
1x left or right side, sold individually

For VW with ball joint front suspension
- Beetle & Karmann-Ghia Type 14,
Years: all from 06/1968->
From Chassis No.118 857 240->
- Type 3 & Karmann-Ghia Type 34 (internal 29 mm)
Years: 02/1968 ->07/1973
From chassis No. 118 189 213->
- Kübel 181, 08/1969 ->12/1979

Conversion kit to ventilated front disc brakes
for longer-lasting, more efficient braking!
Made in Germany by CSP (not approved)
Suitable for :
- Combi Split 1964 ->1967
- Combi Bay Window 1968 ->1970
Fitted with PORSCHE wheels 5 x 130 mm 15 inches minimum
Screws: part numbers KL30500 or KL30600

Improves your Beetle 1302's or 1303's front braking
Complete kit ready for fitting:
- 2 discs with PORSCHE drilling 5 x 130 mm
- 2 sets of German quality bearings
- 2 original callipers with brake pads
- 2 special brake extension pipes
- 2 CSP very high-quality machined solid aluminium plates
for fitting callipers on your drum stub-axles.

Not type approved for road use, for use on track only.

Grooved EMPI rear brake disc. Sold individually.
Old VW bore: 5 x 205mm

For VW Beetle & Karmann-Ghia Type 14, Buggy.

Rear brake kit with grooved bored brake discs
KERSCHER German quality
Solid discs 262 x 9 mm
Porsche 5 x 130mm bore
for Beetle with trumpets.

Grooved solid rear brake disc
German quality KERSCHER
VW Drilling: 4 x 130 mm

For Beetles & Karmann Ghia Type 14:
->rear axle with long flared tubes 08/1966->
->rear axle with universal joints 08/1968->
(for universal joints, also fit ring VH28414).

Grooved solid rear brake disc
German quality KERSCHER
Porsche Drilling: 5 x 130 mm

For Beetles & Karmann Ghia Type 14:
->rear axle with long flared tubes 08/1966->
->rear axle with universal joints 08/1968->
(for universal joints, also fit ring VH28414).

Grooved and ventilated rear brake disc
German quality, for KERSCHER VH40202 kit
Porsche bore: 5 x 130 mm
Diameter 262 mm, thickness: 9 mm

Rear disc brake kit
KERSCHER German quality
Solid discs 262 x 9 mm
drilling VW 4 x 130 mm
for Beetle with universal joints.

Complete kit: 2 discs, PORSCHE 5 x 130 mm drilling, 2 offset type stub-axles -6 cm, 2 callipers with brake pads, mounting screws and bearings.

For Beetle & Karmann-Ghia T14, from 06/1968->
From chassis no. 118 857 240->
with axle with ball joints (except 1302 - 1303).

Not type approved for road usage, for use on private track only.

Complete front disc brake kit with:

superior quality PORSCHE drilling
- 2 German quality discs 5 x 130 cm ( -6 cm)
- 2 sets of German quality bearings, 5 x 130 mm
- 2 original callipers supplied with brake pads
- All mounting fixtures

for Beetle 1200, 1300, 1500 & Karmann-Ghia Type 14
with front axle with ball joints from 08/1965->
From chassis no. 116 000 001->
(not type-approved).
For steering ball joints with large cones.

Complete front brake kit consisting of :
- 2 discs, 4 x 100 mm drilling (Golf) German quality
- 2 offset stub-axles -6 cm (635 mm)
- 2 callipers with brake pads
- German quality bearings
- mounting screws

for Beetle 1200,1300, 1500, from 08/1967->
with front axle with ball joints (except 1302 & 1303).