Carburation

The leading horizontal carburettor!
Carburettor without fittings, with horns
Basic settings, to be kept or adjusted according to the vehicle and its preparation.
This WEBER 40 DCOE 151 type carburettor is configured in the following way:
115 fuel jets, 200 air jets, F11 emulsion pipe, 175 needle, 45F9 idler, diffusers (nozzles) 36.

This high-quality vacuum synchronizer or depressiometer will enable you to adjust the synchronization between the 2 bodies of a Weber, Dellorto or Solex carburetor. It perfectly balances the suction level between the bodies.

Well-tuned carburetion is the foundation of any engine's performance, not to mention the improvement in fuel consumption it can bring.

This tool measures vacuum from 1 to 30 kg/h.

Min. diameter: 40 mm
Max. diameter: 45 mm
Flexible cone for perfect sealing.

- Carburettor numbers: 2 and 4
- Can be used in cars and motorbikes: yes

Made of :

- 4 manometers
- 4rubberpipes 8 x 5 x 750 mm
- 4 collars, replacement sealing rings
-4 x 53 mm connectors (M6 x 0.75)<b

For :
- tank aeration (degassing)
- vacuum connections
- bridges between diesel injectors

Internal diameter: 3.5mm ( /- 0,5mm)
External diameter: 7.5mm ( /- 0.7mm)

Maximum pressure: 7 bars
Linear cutting on request

The leading horizontal carburettor!
Carburettor without fittings, with horns
Basic settings, to be kept or adjusted according to the vehicle and its preparation.
This WEBER 45 DCOE 152 type carburettor is configured in the following way:
145 fuel jets, 155 air jets, F16 emulsion pipe, 200 needle, 55F8 idler, 36 diffusers (nozzles)

Our reconditioned original VW Solex carburetors are sold with exchange, the deposit reference "CONSCAR" is to be added at the time of purchase. This deposit is refunded on return of the complete old carburetor, which must be an identical Solex Germany model, not a Brosol.

Full kit

Voltage: 12 volts
Flowrate: 113 l/h
Pressure: 280/350 g
Femalethread: 1/8" x 27 NPTF
Male diameter: 8 mm
Weight: 700 g

Facet pumps run on 12 volts (3/4 amps),
They are self-adjusting, sealedandlight, with integral filter (except on transistors).

High-quality 8mm-diameter fuel hose. This fuel hose is braided in the material and reinforced, and is compatible with all fuels except ethanol (E85).

Inside diameter: 8 mm ( /- 0.5mm)
Outside diameter: 13.5 ( /- 0.6mm)
Maximum pressure: 6 bars

Hose sold by the meter. If you order several meters, we deliver them in one piece.

Kit repair Solex 32BIS
Assembled as Renault 5/9/11 1108 and 1397 cc
Since 1983

Waterproof and shockproof, this 3-in-1 multifunctional tool is the professional's choice.

Functions :

- Intake synchronizer
- Dynamic fault analyzer
- Tachometer

Powered by an internal 1.5Ah - 7.2V battery providing 6 hours of autonomy.
Self-extinguishing battery save 5 minutes after use.
LEDs use energy only during measurement operations.

Measure depression (suction) to synchronize (balance) and optimize the settings of several carburetors with single or multiple body on the same engine.
Use horizontal or vertical, diameter 40 mm to 75 mm.

Essential for any twin-carburettor assembly
Pressure: 0,42 bar
Max. flow: approximately 114 L/H
Universal fitting: 12 volts
Soldwith two unions: 8 mm

A rubber gasoline hose is a flexible tube designed to carry fuel in a vehicle. It is generally made of nitrile rubber (NBR) or synthetic rubber reinforced to resist hydrocarbons and temperature variations. It is used in particular for junctions between rigid hoses and mechanical components requiring a fuel supply.
This fabric-braidedgasoline hose is not compatiblewith E85.
Inside diameter: 6 mm (+/- 0.5mm)Outside diameter: 10.5 (+/- 0.7mm)Maximum pressure: 7 bar
Hose sold by the meter. If you order several meters, we deliver them in one piece.

Full kit

Voltage: 12 volts
Flowrate: 152 l/h
Pressure: 450/500 g
Female thread:1/4" x 18 NPTF
Malediameter: 9 mm
Weight: 750 g

Facet pumpsrun on 12 volts (3/4 Amps),
They are self-adjusting, sealed and light,with integral filter (except on transistors).

FACET low-pressure electric fuel pump for mounting at pressures from 4 to 7PSI (0.27 to 0.48 bar) for a maximum flow rate of 132.5 L/H.

A Filter King is recommended to regulate and save fuel.

Pressure: 4 - 7 Psi (0.27 to 0.48 bar)
Max. flow: 132.5 L/H
Universal mounting: 12 Volt
Inlet / outlet diameter: 8 mm
Anti-corrosion surface treatment
Made in the USA.
Supplied with mounting bracket, fitting and pre-filter.

For use on Cox

If you wish to experience the legendary power of Weber carburettors, but you are faced with space restrictions in terms of fitting an air filter, there is now an alternative.

Our filters positioned on the horns are designed to provide a very high level of filtration. You just need to clean them periodically Fitting onto the horns takes a few seconds.

Very effective, great look, easy to fit and competitively priced.

Suitable for fitting on 45 DCOE carburettor horns
Diameter of horns: 63 mm

Filter King fuel pressure regulator for 85mm diameter carburettor engines.
The Filter King regulates fuel pump pulsation, prevents the engine from stalling due to excess fuel, reduces the effects of "Vapor Lock" (gas lock), improves idling, saves up to 10% fuel.Glass tank compatible with bio-ethanol (E85).
Connector for 8mm hose- 85 mm version with glass housing.- Fuel pressure adjustable from 0.1 to 0.35 bar- Average flow 350L/h- Hose connections: 8 mm

Low-pressure, self-regulating, electric rotary petrol pump.

Extremely quiet
Body diameter: 38 mm
Pressure: 0.27 to 0.38 bar (4 to 5.5 psi)
Max. flow rate: 95 l/h
Gravity-operated, pushes gasoline but does not suck it up.

Can be mounted on 6V, in which case flow rate will be lower.

A rubber gasoline hose with metal braiding is a flexible hose designed to carry fuel in a vehicle. It is generally made of nitrile rubber (NBR) or synthetic rubber reinforced to resist hydrocarbons and temperature variations. It is used in particular for junctions between rigid hoses and mechanical components requiring a fuel supply.
This reinforced fuel hose with metal braiding offers greater resistance to pressure. This armored fuel hose is not compatible with E85.
Inside diameter: 5.5 mm - 6.0 mmMaximum pressure: 30 barTemperature: -35°c to +90°c(max: 110°c)
Hose sold by the meter. If you order several meters, we deliver them in one piece.

Pressure: 0-15 PSI (0-1 bar)
Dual scale - psi and bar
Mounting thread: 1/8th NPTF