Carburetor Parts

If you wish to experience the legendary power of Weber carburettors, but you are faced with space restrictions in terms of fitting an air filter, there is now an alternative.

Our filters positioned on the horns are designed to provide a very high level of filtration. You just need to clean them periodically Fitting onto the horns takes a few seconds.

Very effective, great look, easy to fit and competitively priced.

Suitable for fitting on 45 DCOE carburettor horns
Diameter of horns: 63 mm

If you're faced with a lack of space to install an air filter, these filter elements on cones offer a solution.

These screened filters on cones are designed to provide a very high level of filtration. Mounting on the cones takes just a few seconds.

High-performance, attractive look, easy installation and competitive price.

Suitable for mounting on WEBER 40 DCOE or other carburetor horns with an overall external diameter of 56 mm.
The cap clips onto the flange of the horn in a trumpet shape, for an attachment diameter of between 52 and 61 mm.
Protective mesh (3 thin/ultra-thin metal layers) is quick and easy to clean.

Venturi suction horns
Suitable for all Empi HPMX, IDF Weber and DRLA Dellorto carburetors.
To optimize carburetor operation: better suction and air guidance. Sold in pairs.
Height: 55 mm
Center distance: 65 mm

Double flange under a WEBER 40 or 45 DCOE carburettor.

The vibrations of prepared engines are harmful to the carburetor and its settings. Protect your carburetors by installing this set of vibration dampers.
WEBER DCOE carburettor baseplate gasket for watertight mounting between intake pipe and carburettor.
Designed for DCOE versions 40 and 45, this gasket can also be used on 48 carburetors (although the aluminum O-ring flange is more suitable for 48 carburetors).

Air filter clamp for Solex carburettor

For VW Cox, Karmann-Ghia, 181, Combi
with engine Type 1: 1200, 1300, 1500, 1600

Stationary idle nozzle for fuel flow adjustment on SOLEX carburettor.
Caliber 52.5

If there is a supplier shortage, you may receive refurbished and checked original nozzles.

Fits on carburettor:
- SOLEX: KDF, 26 VFI, 26 VFIS, 28 VFIS, 28 PCI, 28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4
- BOCAR, BROSOL & repro of 34 PICT3

Fixed idling jet to regulate fuel flow through the SOLEX carburettor.
Caliber 55

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor:
- SOLEX : KDF, 26 VFI, 26 VFIS, 28 VFIS, 28 PCI, 28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4
- BOCAR, BROSOL & repro of 34 PICT3

Main nozzle for fuel flow adjustment on SOLEX carburetors.
Gauge 150

Fits :
- SOLEX :
KDF, 26 VFI, 26 VFIS, 28 VFIS,
28 PCI, 32 PCI, 34 PCI,
28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4,
32 PDSIT2, 32 PDSIT3, 32/34 PDSIT2, 32/34 PDSIT3,
32 PHN1, 32 PHN2, 32 PBIC
- BOCAR, BROSOL

Ideal for sealing 40mm and 45mm rigid flanges on Weber 40/45 DCOE carburetors.

Fixed idling jet to regulate fuel flow through the SOLEX carburettor.
Caliber 50

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor:
- SOLEX : KDF, 26 VFI, 26 VFIS, 28 VFIS, 28 PCI, 28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4
- BOCAR, BROSOL & repro of 34 PICT3

Return pump square diaphragm
German quality
For Weber IDF 1st generation Carburettor

Idle nozzle for Weber carburettor

Size 50

For Weber carburetors listed below:

DMA
DCA
DCNF
DCNFA
DCNV
DCNVH
IDF
28IMB

Weber original part

Main nozzle for fuel flow adjustment on SOLEX carburetors.
Gauge 155

Fits :
- SOLEX :
KDF, 26 VFI, 26 VFIS, 28 VFIS,
28 PCI, 32 PCI, 34 PCI,
28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4,
32 PDSIT2, 32 PDSIT3, 32/34 PDSIT2, 32/34 PDSIT3,
32 PHN1, 32 PHN2, 32 PBIC
- BOCAR, BROSOL

Air correction nozzle for Weber carburetor

Size 200

For Weber :
DCNL
DCO
DCOE
DCO/SP
IDA
IDF

Weber original new part

Gicleur de correction d'air pour carburateur Weber

Taille 180

Pour carburateurs Weber :
DCNL
DCO
DCOE
DCO/SP
IDA
IDF

Pièce neuve d'origine Weber

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

Gasket for BANJO connection on WEBER 40, 45 or 48 DCOE.
Sold individually for inner side (towards carburettor).

Inlet cone retaining clip for Weber DCOE carburettor

For Weber 40 DCOE and 42 DCOE carburetors

This clip holds the air intake cone to the carburetor body.

Sold individually

Idle nozzle for Weber carburetor

Size 75

For Weber carburetors listed below: 

ADC, ADF, ADFA, ADL, ADLA, ADLD
DAC, DAR, DARA, DAT, DATA, DATR, DATRA
DCOF
DFA, DFAV, DFC, DFE, DFM, DFT, DFTA, DFTH, DFTM, DFV
DGAR, DGAS, DGAV, DGF, DGMS, DGS, DGV 
DHS, DHSA, DHTA
DIC, DICA
DMS, DMSA, DMTC, DMTE, DMTL, DMTR, DMTRA, DMTT
DPS
DRT, DRTC, DRTM
DSTA
ICB, ICEV, ICH, ICR, ICT
IDA3C, IDAP, IDT
IF3C
IT
TLC, TLF, TLM
Weber Origin Part