Carburetor Parts for Citroën 2CV 4/6

This choke assist vacuum pump for Solex 2CV6 double body carburetor (09/1978-07/1990 ) is true to original.

This 2CV double-body carburetor choke pump is compatible with 26/35 CSIC or SCIC carburetors. Its role is to assist the carburetor at start-up to facilitate filling and limit clogging at high revs.

This pump comes complete with gasket and screws.

It is compatible with all Solex double-body carburetor models:

Compatible models:
- 2CV 6 type AZ KA/A2: 09/1978 to 07/1990

This SOLEX 26/35 carburetor spacer - Bakelite 8mm is made by MECATECHNIC.

This SOLEX 26/35 carburetor spacer for 2CV is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets (not supplied).

The SOLEX 26-35 CSIC carburettor spacer - plastic is used to isolate the carburettor from the intake pipe.

This spacer should be replaced regularly to ensure that the intake is sealed and the carburettor is working properly.

Fixed idling jet to regulate fuel flow through the SOLEX carburettor.
Caliber 40

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor SOLEX 34PCIS et 26-35 CSIC et SCIC.

This resume pump nozzle for 2CV with 26-35 CSIC twin body carburetor (09/1978-07/1990 ) is a quality remanufacture.

This SCIC 26-35 twin-body carburetor 2CV pickup pump injection tube is faithful to the original. Located at the heart of the carburettor bodies, it will replace a worn or bent nozzle.

Compatible models :
- 2CV 6 type AZ KA/A2: 09/1978 to 07/1990

The SOLEX 34 PCIS carburettor spacer - plastic is used to isolate the carburettor from the intake pipe.

This spacer should be replaced regularly to ensure the inlet is sealed, the carburettor works properly and to avoid any deformation.

Main jet to regulate petrol flow through the SOLEX carburettor 26-35 CSIC.
Caliber 125

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor:
- SOLEX:
26/35 CSIC, KDF, 26 VFI, 26 VFIS, 28 VFIS,
28 PCI, 32 PCI, 34 PCI,
28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4,
32 PDSIT2, 32 PDSIT3, 32/34 PDSIT2, 32/34 PDSIT3,
32 PHN1, 32 PHN2, 32 PBIC
- BOCAR, BROSOL & repro of 34 PICT3

Main jet to regulate petrol flow through the SOLEX carburettor 26-35 CSIC-SCIC.
Caliber 155

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor:
- SOLEX:
KDF, 26 VFI, 26 VFIS, 28 VFIS,
28 PCI, 32 PCI, 34 PCI,
28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4,
32 PDSIT2, 32 PDSIT3, 32/34 PDSIT2, 32/34 PDSIT3,
32 PHN1, 32 PHN2, 32 PBIC
- BOCAR, BROSOL & repro of 34 PICT3

Main jet to regulate petrol flow through the SOLEX carburettor 26-35 CSIC-SCIC.
Caliber 160

This idle screw for 2CV with SOLEX 26-35 SCIC CSIC carburetor is a quality reproduction.

Faithful to the original, this idle screw for 2CV with Solex twin-body carburetor, 26-35 SCIC or CSiC is compatible with all models of 2CV or derivatives with twin-body carburetor.

This choke spring for 2CV with SOLEX carburetor is faithful to the original.

This 2CV choke return spring is compatible with all 2CV models with single or double Solex carburetors.

This primary shaft spring for 2CV with SOLEX 26-35 SCIC CSIC carburetor is true to original.

This throttle shaft spring for Solex 26/35 carburetor is compatible with all models of 2cv and derivatives with double-body carburetor.

This idle screw spring for 2CV with SOLEX 26-35 SCIC CSIC carburetor is true to original.

This idle screw spring for 2CV with Solex carburetor is compatible with all models equipped with a single- or double-barrel carburetor.

This secondary shaft spring for 2CV with SOLEX 26-35 SCIC CSIC carburetor is true to original.

This throttle shaft spring for Solex 26/35 carburetor is compatible with all models of 2cv and derivatives with double-body carburetor.

This vacuum pump cover plate for 2CV6 (09/1978-07/1990) Solex double body carburetor is a quality remanufacture.

This replacement assistance pump cover for 2CV with Solex double corp 26-35 carburetor mounts in place of the vacuum pump.

compatible models :

- 2CV 6 type AZ KA/A2: 09/1978 to 07/1990

Air correction nozzle for Weber carburetor

Size 250

For Weber :
DCNL
DCO
DCOE
DCO/SP
IDA
IDF

Weber original new part

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

This 32 mm nozzle is designed for Weber carburettors of DCNF type and replaces a worn or faulty original part. In the context of restoration or maintenance of a classic vehicle equipped with such a carburettor, replacement of the nozzle helps to restore correct fuel supply operation. The part is sold individually, which makes it possible to replace only the defective element without having to change the entire carburettor. A solution suited to enthusiasts keen on maintaining their vehicle in working order faithful to the original.

Weber code: 41640.052

This RFPAI-FAIP - Bakelite 5mm thermal shim for Solex 46 carburetors is made by MECATECHNIC.

This spacer for the Solex 46 carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

Compatible carburetors:
- SOLEX 46 FAIP
- SOLEX 46 RFPAI

If you wish to experience the legendary power of Weber carburettors, but you are faced with space restrictions in terms of fitting an air filter, there is now an alternative.

Our filters positioned on the horns are designed to provide a very high level of filtration. You just need to clean them periodically Fitting onto the horns takes a few seconds.

Very effective, great look, easy to fit and competitively priced.

Suitable for fitting on 45 DCOE carburettor horns
Diameter of horns: 63 mm Filter caps are sold in pairs, alone (without horns or carburetor).

If you're faced with a lack of space to install an air filter, these filter elements on cones offer a solution.

These screened filters on cones are designed to provide a very high level of filtration. Mounting on the cones takes just a few seconds.

High-performance, attractive look, easy installation and competitive price.

Suitable for mounting on WEBER 40 DCOE or other carburetor horns with an overall external diameter of 56 mm.
The cap clips onto the flange of the horn in a trumpet shape, for an attachment diameter of between 52 and 61 mm.
Protective mesh (3 thin/ultra-thin metal layers) is quick and easy to clean. Sold in pairs, without horns or carburettor

Double flange under a WEBER 40 or 45 DCOE carburettor.

The vibrations of prepared engines are harmful to the carburetor and its settings. Protect your carburetors by installing this set of vibration dampers.
WEBER DCOE carburettor baseplate gasket for watertight mounting between intake pipe and carburettor.
Designed for DCOE versions 40 and 45, this gasket can also be used on 48 carburetors (although the aluminum O-ring flange is more suitable for 48 carburetors). For 1 double-barrel DCOE carburetor only

Lower, this cover allows the air inlet to be offset to a cool part" of the engine compartment.
The round base allows 360° orientation." Air inlet pipe or boa notincluded

Venturi suction horns
Suitable for all Empi HPMX, IDF Weber and DRLA Dellorto carburetors.
To optimize carburetor operation: better suction and air guidance. Sold in pairs.
Height: 55 mm
Center distance: 65 mm

Brass float for Weber DCOE carburetor.

Original Weber
Weight: 25g

Emulsion tube for Weber carburettor

Size F11

For Weber :
DCOE
DCO/SP
DCOM
DCNL
DCN
DCO
IDA
IDF

New original Weber part

Lower, this cover allows the air inlet to be offset to a cool part" of the engine compartment.
The round base allows 360° orientation." Air inlet pipe or boa notincluded

Emulsion tube for Weber carburetor

Size F16

For Weber carburetors:
DCOE
DCO/SP
DCOM
DCNL
DCN
DCO
IDA
IDF

New genuine Weber part

Thermoset Wax Capsule for Weber Carburetor

For Weber Carburetor below:
DRTC
TLC
TLP

This choke cap contains a thermodilatable wax that, when heated, operates the choke flap. As the wax loses its properties over time, it is necessary to replace this part to regain proper cold start

Dimensions:
Overall length: 70mm
Tip length: 37mm
Base length: 21mm
Base diameter: 18mm

Original new part from Weber

This set consists of two mini horns to be mounted on the carburettor, enabling the installation of two ultra-flat filters (supplied).
Particularly useful for an assemblywith no space for a large air filter.
Supplied with 2 shorter emulsion tubes. The carburettor in the second photo is for illustrative purposes only, it is not included at the price.

Float for Weber DCOE carburetor

Original Weber
Weight : 18gr

6mm thermal shim for Weber carburetors

For the following Weber carburetors:
DIR
DGV
DGAV
DCD

The thermal shim isolates the carburettor from the heat generated by the engine.
Requires two base gaskets for installation (not supplied)

Ideal for sealing 40mm and 45mm rigid flanges on Weber 40/45 DCOE carburetors.

Original WEBER Starter that fits the following carburetors:
- Weber 40 and 45 DCOE
- Weber 40, 44 and 48 IDF

Reverse Starter: Left-handed operating direction