Tools for carburation

This high-quality vacuum synchronizer or depressiometer will enable you to adjust the synchronization between the 2 bodies of a Weber, Dellorto or Solex carburetor. It perfectly balances the suction level between the bodies.

Well-tuned carburetion is the foundation of any engine's performance, not to mention the improvement in fuel consumption it can bring.

This tool measures vacuum from 1 to 30 kg/h.

Min. diameter: 40 mm
Max. diameter: 45 mm
Flexible cone for perfect sealing.

- Carburettor numbers: 2 and 4
- Can be used in cars and motorbikes: yes

Made of :

- 4 manometers
- 4rubberpipes 8 x 5 x 750 mm
- 4 collars, replacement sealing rings
-4 x 53 mm connectors (M6 x 0.75)<b

Waterproof and shockproof, this 3-in-1 multifunctional tool is the professional's choice.

Functions :

- Intake synchronizer
- Dynamic fault analyzer
- Tachometer

Powered by an internal 1.5Ah - 7.2V battery providing 6 hours of autonomy.
Self-extinguishing battery save 5 minutes after use.
LEDs use energy only during measurement operations.

Measure depression (suction) to synchronize (balance) and optimize the settings of several carburetors with single or multiple body on the same engine.
Use horizontal or vertical, diameter 40 mm to 75 mm.

Universal conical rubber adaptor for carburettor synchroniser.

Intake diameter: 39 - 55 mm

Carbmate synchronises your carburettors precisely.

It has 2 inputs to synchronise the carburettors two by two.

It is powered via crocodile clips which are attached to the vehicle battery, under 12 V only.

The setting resolution is adjusted by 2 to 0.5 cm mercury.

Supplied with:
- the power supply clips
- carburettor connection hoses

This set of micro drills for carburettor jets is ideal to test the different jet diameters, 0.4 to 3.2 mm.

What sizes are the drill bits?

0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / 2.8 / 3.0 / 3.2 mm

This set is delivered with a manual chuck

Connector with M6 threaded end fitting.
Ideal for Yamaha, Kawasaki and other makes.

Carbmate synchroniser accessory (UC30012).

Universal conical rubber adaptor for carburettor synchroniser.

Intake diameter: 32 - 55 mm

Connector with M5 threaded end fiter.
Ideal for Honda for Suzuki.

Carbmate synchroniser accessory (UC30012).

This kit enables 4 carburettors to be synchronised at the same time.

Connects to Tecmate Carbmate.

The adapter ensures an optimum setting for Weber dual carburettor.
DGV/DGAV/DGMS/DGAS/DGR
The rubber sleeve can be fitted on the synchronizer, reference VO09552 (not supplied).

Air flow balancer for twin or multiple carburettors.

Compatible with most side-draught or down-draught carburettors with Venturi air intakes.

Can be used with SU Solex, Auto-lite (Fomoco), Stromberg, Weber & Zenith carburettors.

Adapted to diameters from 25.4 mm (1") to 57.15 mm (1/4").

Good adjustment of your carburettor will improve the performance, fuel consumption and acceleration of your vehicle.

This vacuum synchronizer or depressiometer will enable you to adjust the synchronization between the 2 bodies of a Weber, Dellorto or Solex carburetor of large caliber (48 IDA, 48 DCOE etc). It allows you to perfectly balance the suction level between the bodies.
Well-tuned carburetion is the basis of any engine's performance, not to mention the improvement in fuel consumption it can bring.
This tool measures vacuum from 1-35Kg/h
Minimum diameter: 48 mm
Max. diameter: 50 mm
Flexible cone for perfect sealing.

This high quality vacuum synchroniser or vacuum gauge will allow you to adjust the synchronisation between the 2 bodies of a Weber, Dellorto or Solex carburettor. It means the suction level will be perfectly balanced between the bodies.

A well-tuned carburettor is the basis for good engine performance, not to mention how much it can improve fuel consumption.

This tool measures a vacuum from 1 to 30 kg/h.

Minimum diameter: 41 mm
Maximum diameter: 55 mm
Flexible cone for a perfect seal.

This adapter ensures the optimum setting of Solex40 DDH and Weber 40 DCOE dual carburettors on old Alfa Romeo engines.
The rubber sleeve can be fitted on the synchronizer, reference VO09552 (not supplied).
Inner diameter 28 mm, outer diameter 40 mm.