Bonding putty

Heavy-duty bonding compound (300 ml). 
Sikaflex-552 AT is based on Sika's hybrid polyurethane technology (STP) and contains no isocyanates.
Recommended for mounting exterior elements requiring strong adhesion.
Recommended for the installation of spoilers, solar panels, etc. and all other objects in contact with bodywork.
Sikaflex-552 AT can be painted with most body enamels (including water-based enamels).
Pretreat with SIKA CLEANER 205.
Color: white.
Cartridge: 300ml.

Sikaflex-552 AT (300 ml) is a flexible, single-component hybrid adhesive for high-performance structural bonding.

It is capable of withstanding high dynamic stresses.

Example: decorative bodywork tabs, sheet metal joints...

This Sikaflex 552 AT joint is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the ISO 9001 quality assurance system and the ISO 14001 environmental management system.

Sikaflex-552 AT is ideal for structural assemblies subject to dynamic stresses.

Good adhesion to all materials normally used in body shops, such as metal primers, primers, metals and enamelled synthetics.

The products :

- Advanced hybrid technology
- Good adhesion to a wide range of substrates without primer
- Abrasion and impact resistant
- Withstands high dynamic stress
- High initial strength
- Fast curing
- Resistant to aging
- Low odor
- Non-corrosive
- Free from isocyanates and silicone solvents

Sikaflex 552 AT is a high-performance structural soft single-component hybrid adhesive.

It is capable of resisting high dynamic loads.

Example: decorative strips on the bodywork, sheet metal panel joints, etc.

This Sikaflex 552 AT sealant is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the quality assurance system ISO 9001 and the environmental management system ISO 14001.

Sikaflex-552 AT allows structural assemblies that are subject to dynamic loads to be joined.

Good adherence to all materials commonly used in bodywork workshops, such as metal primers, primers, metals and enamelled synthetic materials.

Product advantages:

- Advanced hybrid technology
- Good adherence to a wide range of different unprimed supports
- Abrasion and impact resistant
- Resistant to high dynamic loads
- High initial resistance
- Fast hardening
- Resistant to ageing
- Emits little odour
- Not corrosive
- Does not contain isocyanates, silicone solvents or PVC

Colour: black
Contents: 300 ml

SIKAFLEX 252 from SIKA is a strong bonding putty . In the world of motorhomes, caravans and vans, it is recommended for mounting exterior components requiring strong adhesion: roof extensions, spoilers, solar panels, roof racks, etc...
Preliminary preparation with SIKA CLEANER 205 - 250 ml
Cartridge: 300 ml
Color: white.
Sold individually.

SIKALASTOMER 831E is a mastic tape specially designed for the installation andsealing of ventilation systems (hoods, chimneys, ventilators, skylights), profiles and rocker panels.
Color: gray.
Dimensions: 25 x 3 mm.
Sales unit: 12-meter roll.

For positioning rear and limiting lights.
Also recommendedfor assembling the roof, bumpers, fridge grilles...
Colour: grey.
Dimensions: 25 x 3 mm.
Sold as a 15 metre roll.

Good resistance to UV and ageing.
Requires no prior treatment. Can be painted after formation of the skin.
Applications: windows, side skirts, chassis, wheel arches.
Substrates: PPMA, PVC, glass, aluminium, painted parts, galvanised steel and polyester.
Type: Kip, Chateau, AZ System
Colour: black.
290 ml cartridge

Good resistance to UV and ageing.
Requires no prior treatment.
Can be painted after formation of the skin.
Applications: windows, side skirts, chassis, wheel arches.
Substrates: PPMA, PVC, glass, aluminium, painted parts, galvanised steel and polyester.
Type: Kip, Chateau, AZ System
Colour: white.
290 ml cartridge

With higher bonding strength than MS-2, it benefits from good resistance to UV and ageing.
Requires no prior treatment. Can be painted after formation of the skin.
Applications: windows, side skirts, chassis, wheel arches.
Substrates: PPMA, PVC, glass, aluminium, painted parts, galvanised steel and polyester.
Type: Kip, Chateau, AZ System.
Colour: black.
290 ml cartridge

With higher bonding strength than MS-2, it benefits from good resistance to UV and ageing.
Requires no prior treatment. Can be painted after formation of the skin.
Applications: windows, side skirts, chassis, wheel arches.
Substrates: PPMA, PVC, glass, aluminium, painted parts, galvanised steel and polyester.
Type: Kip, Chateau, AZ System.
Colour: white.
290 ml cartridge

Strong bonding compound. Colour: white
Recommended for assembling external elements that need strong adhesion.
Recommended for the installation of spoilers, solar panels, etc.
Prepare with SIKA CLEANER 205 - 250 ml.
Contents: 300 ml

SIKAFLEX 554 (300 ml) is a hard-wearing bonding putty recommended for mounting exterior components on motorhomes, caravans and converted vans requiring strong adhesion (roof extensions, roof racks, awning rails, etc.). It is highly resistant to ageing and weathering, and can be applied to a wide range of substrates without priming. It contains no phthalates.
Tip: Pretreat with SIKA CLEANER 205 - 250 ml (Ref: CS10933)

Color: black.
Cartridge: 300 ml.

Sikaflex 522 is a multi-purpose hybrid mastic adhesive (300 ml) with excellent adhesion. It offers excellent ageing and UV resistance. Its improved formula compared with Sikaflex 212 enables better spreading and easier smoothing with an even softer texture. 
It can be painted or sanded. 
For a good finish, smooth with soapy water before film formation. 
Accepted substrates: plastic, wood, concrete, composite materials, aluminum, sheet metal. 
Solvent- and isocyanolate-free.
Color: steel gray.
300-ml cartridge.

Sikaflex 522 is a multi-purpose hybrid mastic adhesive (300 ml) with excellent adhesion. It offers excellent ageing and UV resistance. Its improved formula compared with Sikaflex 212 enables better spreading and easier smoothing with an even softer texture. 
It can be painted or sanded. 
For a good finish, smooth with soapy water before film formation. 
Accepted substrates: plastic, wood, concrete, composite materials, aluminum, sheet metal. 
Solvent- and isocyanolate-free.
Color: black
300 ml cartridge.

SIKALASTOMER 710 TX is a thixotropic butyl sealant for a wide range of sealing and caulking applications in motorhomes, caravans and camper vans. It offers excellent resistance to ageing and UV rays. Its special formula makes it easy to dismantle later. It is used to install skylights, ventilation grilles, etc.
Advantages:
- Good adhesion spectrum.
- Easy to install.
- Re-disassembly of glued part possible.

Color: white
300 ml cartridge.

SIKALASTOMER 710 TX is a thixotropic butyl sealant for a wide range of sealing and caulking applications in motorhomes, caravans and camper vans. It offers excellent resistance to ageing and UV rays. Its special formula makes it easy to dismantle later. It is used to install skylights, ventilation grilles, etc.
Advantages:
- Good adhesion spectrum.
- Easy to install.
- Re-disassembly of glued part possible.

Color: black.
300 ml cartridge.

Based on Poly-Iso-Butene, DEKASEAL 8396 (310ml) is the ideal sealant for fitting windows, skylights, ventilators and wicket doors.
It retains excellent flexibility over time.
Easy to apply. Drip-free.
Non-paintable.
Substrates: lacquer, aluminum, ABS, PMMA (Plexiglas).
Color: black.
310 ml cartridge.

Ref. Dekaseal 8936

Sikaflex 521 UV mastic adhesive is based on Sika 's hybrid polyurethane technology (STP, Sika technology). It contains no isocyanates, solvents, VOCs, silicone or PVC.)
Polymerization takes place under the action of ambient humidity, to form a durable elastomer.

Product benefits:
- Excellent resistance to ageing and climatic conditions.
- Adheres to a wide range of substrates: wood, metals, primers and paints (two-component), ceramics and plastics.
- Flexible.
- Can be sanded and painted.
- Low odor.
- Non-corrosive.
- Temperature range: -40°C to 90°C.

We recommend it for mounting exterior components on your motorhome, caravan or van, requiring strong adhesion, goodresistance to ageing and UV rays. In particular, for the installation of spoilers, solar panels, etc. and any other objects in contact with bodywork.

Pretreat with optional SIKA CLEANER 205 degreaser.

Color: white.
Cartridge: 300ml.
Pack of 3 cartridges (3 x 300ml).

Sikaflex 521 UV mastic adhesive is based on Sika 's hybrid polyurethane technology (STP, Sika technology). It contains no isocyanates, solvents, VOCs, silicone or PVC.)
Polymerization takes place under the action of ambient humidity, to form a durable elastomer.

Product benefits:
- Excellent resistance to ageing and climatic conditions.
- Adheres to a wide range of substrates: wood, metals, primers and paints (two-component), ceramics and plastics.
- Flexible.
- Can be sanded and painted.
- Low odor.
- Non-corrosive.
- Temperature range: -40°C to 90°C.

We recommend it for mounting exterior components on your motorhome, caravan or van, requiring strong adhesion, goodresistance to ageing and UV rays. In particular, for the installation of spoilers, solar panels, etc. and any other objects in contact with bodywork.

Pretreat with optional SIKA CLEANER 205 degreaser.

Color: black.
Cartridge: 300ml.
Pack of 3 cartridges (3 x 300ml).

TEROSON's TEROSTAT M110 Ø 8 mm tape sealant is recommended for fixing windows and skylights.
Butyl rubber-based extruded tape with an elastic polyethylene foam core.
Color: black.
Dimensions: Ø 8 mm.
Sales unit: 1 roll of 25 meters.