Wheels are the most exposed part of the car: brake dust, grease, road grime, and tyres that turn grey over time. The Mecatechnic wheel care kit has been designed to tackle these issues: seven complementary products to clean the rims, remove ferrous particles, scrub every nook and cranny, and restore depth to the tyres.
Kit contents
- BELGOM Wheel Cleaner, 500 ml spray
- Set of 3 wheel rim cleaning brushes
- Iron X ferrous decontaminant, 500 ml
- AUTOGLYM Tyre Cleaner and Polish
- Tyre shine applicator pad
- ERGOTOUCH hand brush, white fibres
- Multi-purpose microfibre cloth, 40 x 40 cm
Step-by-step instructions
- Rinse the wheels. With the wheel rims cool and in the shade, rinse with clean water to remove dust and grit. (A hot wheel rim causes the products to dry too quickly and may leave streaks.)
- Apply the rim cleaner. Spray the cleaner over the entire surface, including the inside of the rim edge. Leave it to work for 1 to 2 minutes without letting it dry.
- Brush the rims. Use the large brush for the inside of the rim, the medium brush for the face and spokes, and the finest brush for the nuts and nooks and crannies. Work on the product whilst it is still damp, then rinse thoroughly. Keep these brushes for use on rims only.
- Decontaminate with Iron X. On a clean, rinsed rim, spray Iron X over the entire surface. Leave it to work for a few minutes: the product changes colour on contact with ferrous particles. Do not let it dry, then rinse thoroughly.
- Clean the tyres. Using the Ergotouch hand brush, scrub the tyre sidewalls to remove grime and old polish. Rinse with clean water.
- Dry. Using a clean microfibre cloth, dry the wheel rims and wipe down the tyre sidewalls. A dry tyre ensures the product adheres properly.
- Polish the tyres. Apply a small amount of product to the applicator pad, then spread it in a thin, even layer over the tyre sidewall. Leave to dry for a few minutes. (Avoid the tread, rims and brake discs.)
Tips
- Always work in the shade and on cold wheels to avoid drying marks.
- Rinse the rims thoroughly between using the cleaner and Iron X, and never mix the products together.
- Wear gloves and ensure there is plenty of ventilation: Iron X has a strong odour.
- On older rims (chrome, polished aluminium, spoked, original paintwork), test the products on an inconspicuous area first.
- Never leave any polish on the tread: it must retain its grip.
- Reserve the brushes for the wheels and rinse them after use: they trap abrasive particles.
- Wash the microfibre cloth separately, without fabric softener, to preserve its absorbency.
Who is it for?
This kit is designed for classic car enthusiasts who want a complete set; it contains everything needed to clean rims and tyres effortlessly and achieve a polished finish.