Outside cover

Top quality!
Cover made from waterproof PVC 100.Protects from the sun, rain, snow, etc.
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 440 x 165 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 440 x 165 x 145 cm

For VOLKSWAGEN Transporter T4 / T5 - long chassis WITH roof extension (hard).
This Luxe cover is made with 3 highly water-resistant layers, but is not waterproof. Breathable, it is made from a modern non-woven polypropylene material that provides excellent protection and ventilation. Frees the bodywork from trapped heat and moisture, and protects paintwork from the sun's UV rays. It offers enhanced protection in all seasons against the effects of sun, rain, snow, leaves.It delays the ageing of the vehicle's exterior parts.

Features:
- Composition: grey PVC 340 g/m².
- 2 vents provide ventilation inside the cover.
- Watertight electro-welded joints.
- Non-woven inner lining, soft to the touch, protects the bodywork.
- Positioned elastic bands secure the cover to the front and rear of the vehicle.
- Eyelets on the sides of the cover allow you to attach securing straps to either side of the vehicle.
- Hand-washable.

For VOLKSWAGEN T4 and T5 long-chassis vehicles with roof extension (hard):
- T4 from 1990 to 2003
- T5 from 2003 to 2015 Not suitable for VW T4 and T5 long chassis without extension.
Dimensions: 535x195x205 cm

Discover this exterior protective cover designed specifically for Transporter T4 T5 T6 Not suitable for T4 T5 T6 T6.1 long chassis with hard extension. Does not have door openings on passenger and driver sides.

Protective tarpaulin designed for indoor and outdoor mixed use.

Cut to the dimensions of the Porsche 911 type 996, it has its pockets for mirrors. It is therefore suitable for both the Coupé and Cabriolet versions of :

- 996 3.4 Carrera and Carrera 4 from 1998 to 2001
- 996 3.6 Carrera and Carrera 4 from 2002 to 2005
- 996 3.6 Carrera 4S from 2002 to 2005
- 996 3.6 Turbo and Turbo S from 2000 to 2005

It is not suitable for rear wings of GT2 and GT3 versions

You will protect both your 911 and its soft top, UV, rain, pollution, dust, resin tree and bird droppings.

The design of its seams and its material, inside surface, is fleece. This ensures the anti-scratch function and the set fits in its supplied bag.

Tailor-made protective cover for indoor and outdoor use, providing protection against sun, rain and dust,

For E30 Cabriolet:
- All models Composed of 3 layers (2 in polypropylene and 1 in breathable microporous fabric), breathable and resistant to rot and mildew

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Protect your car all year round!
Protection against UV rays, rain, snow and frost, pollen, dust, pine resin, etc.
This cover allows your bodywork to "breathe".

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145cm

Top quality!
Cover made from waterproof PVC100. Protects from the sun, rain, snow, etc.
Inner lining made from very softnon-woven fabric which will not scratch the bodywork.
Elastic straps atthe front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145 cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145cm

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 452 x 176 x 145cm

Give your Peugeot 205 an external cover specially designed for it!

This external cover enables you to protect your 205 from rain, bad weather and dust.
The inner part of the cover is soft, which protects your bodywork from scratches due to friction.

This cover fits your 205 perfectly thanks to its elasticated straps.

This set of 3 adjustable straps secures the protective cover against severe weather.

The offered length, allows a use on any type of light vehicle
This guarantees a maintenance of the protection during strong wind

The set includes 1 strap of 14 meters + 2 straps of 7.5 meters
The straps measure 25 mm
The buckles are made of SR or ESR plastic.

This kit is not suitable for transporting or stowing merchandise.

This specific cover created for the Porsche Boxster 987, will protect the hood from any external aggressions.

Completely waterproof, it will also provide protection against bird dirt, resin from trees, pollution, dust and UV rays.

The cover is made from woven polyester coated with polyurethane and the edges (parts in contact with the bodywork paint) are in fleece material in order not to scratch the bodywork.

Its storage bag and quick installation allows it to be used when parking. It also provides additional protection against theft, since fitting and removing this cover requires opening the doors and the boot. It is recommended to remove the cover from time to time to prevent any condensation build up. We advise against using this cover on recent paintwork (less than 3 months).

This specific cover created for the Porsche Boxster 987, will protect the hood from any external aggressions.

Completely waterproof, it will also provide protection against bird dirt, resin from trees, pollution, dust and UV rays.

The cover is made from woven polyester coated with polyurethane and the edges (parts in contact with the bodywork paint) are in fleece material in order not to scratch the bodywork.

Its storage bag and quick installation allows it to be used when parking. It also provides additional protection against theft, since fitting and removing this cover requires opening the doors and the boot. It is recommended to remove the cover from time to time to prevent any condensation build up. We advise against using this cover on recent paintwork (less than 3 months).

Dimensions: 530 x 175 x 145cm

High-quality anti-hail cover made of 5mm thick EVA foam.
Protects the bonnet, roof and boot as well as the side windows.
Designed to resist hail up to Ø12mm projected at speeds of up to 70km/h
This "anti-hail" cover is waterproof, non-breathable, and UV-resistant.
It is equipped with 2 straps (front and back) to attach the cover underneath the car, as well as vents to reduce condensation.
There are reflective triangles on the front and the back for extra safety.
Delivered with storage bag. We advise you to move the cover around a little every week to prevent condensation forming and thus prolong the tarp's life.

Dimensions: 530 x 175 x 145cm

High-quality anti-hail cover made of 5mm thick EVA foam.
Protects the bonnet, roof and boot as well as the side windows.
Designed to resist hail up to Ø12mm projected at speeds of up to 70km/h
This "anti-hail" cover is waterproof, non-breathable, and UV-resistant.
It is equipped with 2 straps (front and back) to attach the cover underneath the car, as well as vents to reduce condensation.
There are reflective triangles on the front and the back for extra safety.
Delivered with storage bag. We advise you to move the cover around a little every week to prevent condensation forming and thus prolong the tarp's life.

Dimensions: 530 x 175 x 145cm

High-quality anti-hail cover made of 5mm thick EVA foam.
Protects the bonnet, roof and boot as well as the side windows.
Designed to resist hail up to Ø12mm projected at speeds of up to 70km/h
This "anti-hail" cover is waterproof, non-breathable, and UV-resistant.
It is equipped with 2 straps (front and back) to attach the cover underneath the car, as well as vents to reduce condensation.
There are reflective triangles on the front and the back for extra safety.
Delivered with storage bag. We advise you to move the cover around a little every week to prevent condensation forming and thus prolong the tarp's life.

Dimensions: 530 x 175 x 145cm

High-quality anti-hail cover made of 5mm thick EVA foam.
Protection of the bonnet, roof and trunk as well as the side windows.
Designed to resist hail up to Ø12mm projected at speeds of up to 70km/h
This "anti-hail" cover is waterproof, non-breathable, and UV-resistant.
It is equipped with 2 straps (front and back) to attach the cover underneath the car, as well as vents to reduce condensation.
There are reflective triangles on the front and the back for extra safety.
Delivered with storage bag. We advise you to move the cover around a little every week to prevent condensation forming and thus prolong the tarp's life.

This specific cover created for all BMW Z3 E36 :

It will protect the hood from any external aggressions.

Completely waterproof, it will also provide protection against bird dirt, resin from trees, pollution, dust and UV rays.

The cover is made from woven polyester coated with polyurethane and the edges (parts in contact with the bodywork paint) are in fleece material in order not to scratch the bodywork.

Its storage bag and quick installation allows it to be used when parking. It also provides additional protection against theft, since fitting and removing this cover requires opening the doors and the boot. It is recommended to remove the cover from time to time to prevent any condensation build up. We advise against using this cover on recent paintwork (less than 3 months).

Top quality!
Cover made from waterproof PVC 100. Protects from the sun, rain, snow, etc...
Inner lining made from very soft non-woven fabric which will not scratch the bodywork.
Elastic straps at the front and back.
2 air vents. Colour: Grey
Density: 340 g/m2
Dimensions: 420 x 176 x 149 cm