0 to 3 bar DIGIFIZmini boost pressure gauge on dashboard for VW Golf 2 (08/1983-10/1991)

0 to 3 bar DIGIFIZmini boost pressure gauge on dashboard for VW Golf 2:

- All models from 08/1983 to 10/1991

ATTENTION: Make sure there's a free space on the dashboard switch panel!

Technical data :
- Integrated pressure sensor
- Range: 0.85 to 3 bar
- Analog design with SMD components
- Digital display
- Accuracy: 0.05 bar
- Indicated value pictogram identical to original button pictograms for perfect integration.
- Green backlighting compatible with dashboard lighting adjustment

Vacuum hose included (see photo).
1 x 3-pin plug and 4 x specific bare terminals are supplied for connection to the button.
Connection material (0.35 - (0.5) mm² wire 22 - (20) AWG) not supplied.

This pressure gauge, in the shape of an original button, is mounted on the dashboard control switch panel (use the location of an inactive button). Installation requires connection to the original wiring harness (wires for connection to the knob not supplied).

It's ideal for modernizing the interior of your Golf 2 while retaining its original look. Thanks to its clear, precise indications, you'll know at a glance the boost pressure reading. Indispensable forturbocharged and supercharged engines .

WARNING: We strongly advise you to add a filter upstream of the pressure gauge to avoid damaging it with rising oil!

INFORMATION: Each time you start the engine, the boost gauge calibrates to atmospheric pressure (approx. 1 bar). Therefore, do not start the engine directly after ignition, as this will initially supply the gauge with air, allowing it to calibrate. If the engine is started or run while the gauge is being calibrated, it will display incorrect values.