The USA type rear light glass for a VW Combi is a rear light model designed for versions exported to the United States, or those that have been modified to meet American safety standards. These rear lights are often characterized by red and white lenses and different light configurations (turn signals, brake lights, and reverse lights) compared to European versions, which may have slightly different configurations in terms of color and arrangement of light elements. The USA type rear lights for VW Combi are divided into two sections: a red lens for position lights, brake lights, and turn signals, and a white lens for reverse lights. This configuration complies with American road safety standards. The USA type rear lights must meet specific criteria in terms of brightness, visibility, and positioning of the lights to comply with traffic regulations in the United States. The aesthetics of the USA rear lights sometimes stand out with a bright red lens and a housing often made of transparent or opaque plastic. They can give a slightly more modern or different look compared to classic European rear lights. Although specifically designed for VW Combi exported to the United States, these lights can also be installed on European versions of the Combi if you are looking for a different look or if you are restoring a vehicle in an American style (California, Florida). To replace the rear light glasses, start by unscrewing the visible screws from the outside that hold the glass in place on the housing. Once the screws are removed, you can take out the old rear light lens. If the lens is cracked or broken, it can be easily removed. Be careful not to injure yourself if the light is cracked or broken as the plastic can be sharp. Take the opportunity to check the condition of the rear light wiring and bulbs. If the bulbs are worn or defective, replace them at the same time. Ensure that the electrical connections are clean, solid, and not oxidized. Place the new rear light lens in the housing. Check that the mounting is correct and that the lens is securely attached. Once the glass is installed, check the proper functioning of the rear lights: position light, brake light, turn signal, and reverse light. Make sure that all functions are operational and that the lights are properly aligned. Please note that the installation of USA type glasses is not approved, particularly because the turn signals become red and no longer orange. You could be fined by law enforcement and may not be accepted during your technical inspection.
Original OEM references
211-945-241rr
