Complete brake hose kit for 2cvs cars with front drum brakes

This complete brake hose kit for 2cvs with front drum brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front drum brake system from June 1970.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- The 2 connection pipes for the rear drums
- The intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- The hose from the sill connection to the rear tee
- 20 barrel seals 3.5mm for DOT4 or DOT5 liquids

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.