Product description

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 51mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: original front struts must be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

Compatibility

BMW

The product is compatible with the following vehicles: