Product description

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 series E34 4, 6, 8 cylinders with standard chassis or sport suspensions and strut diameter 55 mm :

Sedan :
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 2 from 11/1993 to 12/1995 (engine code M43B18)
- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20)
- 520i 150hp phase 1 from 05/1990 to 08/1992 (engine code M50B20)
- 520i 150hp from 09/1992 to 12/1995 (engine code M50B20TU)
- 525i 170hp phase 1 from 06/1987 to 04/1990 (engine code M20B25)
- 525i 192hp phase 1 from 05/1990 to 08/1992 (engine code M50B25)
- 525i 192hp from 09/1992 to 12/1995 (engine code M50B25TU)
- 530i 188hp phase 1 from 06/1987 to 05/1990 (engine code M30B30)
- 530i V8 218hp from 08/1992 to 12/1995 (engine code M60B30)
- 535i 211hp phase 1 from 03/1987 to 04/1993 (engine code M30B35)
- 540i V8 286hp phase 1 from 03/1992 to 12/1995 (engine code M60B40)
- 524td 115hp phase 1 from 07/1987 to 08/1991 (engine code M21D24)
- 525tds 143hp from 02/1990 to 12/1995 (engine code M51D25)
- M5 3.6L 6cyl 315hp phase 1 from 04/1988 to 04/1992 (engine code S38B36)
- M5 3.8L 6cyl 340hp from 07/1991 to 07/1995 (engine code S38B38)

Touring :
- 518i 4cyl 113hp phase 1 from 11/1992 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 1 from 11/1993 to 06/1996 (engine code M43B18)
- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20)
- 520i 150hp from 09/1992 to 06/1996 (engine code M50B20TU)
- 525i 192hp phase 1 from 12/1990 to 08/1992 (engine code M50B25)
- 525i 192hp from 09/1992 to 06/1996 (engine code M50B25TU)
- 530i V8 218hp from 05/1992 to 06/1996 (engine code M60B30)
- 540i V8 286hp from 05/1993 to 06/1996 (engine code M60B40)
- 525td 115hp from 11/1992 to 05/1996 (engine code M51D25)
- 525tds 143hp from 07/1991 to 06/1996 (engine code M51D25)
- M5 3.8L 6cyl 340hp phase 1 from 03/1992 to 08/1995 (engine code S38B38)

WARNING: Not suitable for 525ix 4-wheel drive or models with air suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -95mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -85mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E34 the best, with a top-quality MTS TECHNIK kit!

Compatibility

BMW

The product is compatible with the following vehicles: