TOOLATELIER silentbloc mounting tools

Very satisfied, I've used it, it's impeccable

Quick and easy to use, I used it to extract the rear silent blocks from a Scenic.

Nothing more to say, it's excellent

tools that enabled me to easily replace the cradle silent blocks on a clio 3

very good product, very effective and very simple, but you need to use sockets or large washers when extracting in tight places. personally, i had to cut a wedge in half with a band saw to fit it in. i'm not shocked to have to adapt this kind of product.

good quality product. i've changed suspension triangle block silents on the workbench a real piece of cake.and one on the vehicle no problem either. i highly recommend this product.

I haven't had a chance to test it yet, but I can smell the quality! I haven't seen how solid the threaded rods are (10.8 I'd say), the nuts have a great grip on the rod and are on washers with ball bearings, so they're perfect for exerting maximum force without screwing anything up! the bells have a notch in the center to accommodate the washers, so everything stays perfectly centered!

Very useful box, already used and very satisfied. The product seems solid for the mechanic that I am.

This tool really helped me. Thank you

Very good product, my mechanic is delighted with it 10/10

No need to break the bank to change sylenblocks

Very good and very fast.

very good product. Very easy to use. Very good quality tool kit.

Very good material and easy to use

Enough to tinker with on a Sunday

top of the range for use with a press, there's a wide choice of dimensions so you can get out any bearing or silent block.

Very good value for money. Top for silent blocks CLIO 3 RS ph 2

Very good and easy to use

Perfect sturdy product. Exactly what I wanted

Product tested on Ar cradle and E36 swingarm. Nothing to complain about. Colleague amazed by quality and ease of use.

Very good product nothing to say

Very good product Makes mechanics easier

A small problem with a threaded rod, which was quickly replaced under warranty. Good material, I recommend

very strong and simple to work with

Perfect, very complete case, plenty to do.

Super product by greasing the threaded rods well (mos2 grease) I changed all my cradle, axle and swingarm silentblocs on the e46 and the rods are as good as new !!!! Only the cradle and swingarm silentblocks had to be disassembled in a different way, as their shape didn't allow them to be removed with the kit.

Impeccable for disassembling silentbloc no. 9 from the bridge on e46

Very good product for mechanical enthusiasts

I'm looking for products suitable for quick assembly

Robust material and all diameters

Good quality, very easy to use

product as expected very solid not yet used

good quality tools i recommend .

Changing silenblocs Super product To all the mechanics

haven't tried it yet, but the tools seem to be of good quality

Very satisfactory quality

Very complete and robust tooling.

Great when you don't have press

Very satisfied with the product

No comment ! ras ! excellent und zehr supper !!!!!!!!!

Excellent quality/price I recommend

Excellent and perfect nothing to say

Too bad the delivery service is catastrophic.

Perfect for removing Silentbloc from a t5

Good quality product

Very good product, good quality.

Good value, gets the job done.

The ease with which I can find the right tools for my needs at reasonable prices.

Robust and attractively priced

Fast delivery, as described

Robust

It's solid ... perfect for both silent-blocs and bearings. With a workshop press too...

Product meets my expectations

Macatechnic's responsiveness was excellent, compensating for the shortcomings and disruptions of global relay.

Very good

Very satisfied

I bought these tools because I needed them

Very good equipment Ordered received promptly thanks mecatechnic already Quality equipment and extremely well supplied

Strong and versatile product, too bad there's no grease supplied for the threaded rods.

Completely satisfied with the product

It corresponds perfectly to my expectations

Used for four silentblocs, efficient... to be seen for bearings...

The product looks solid and complete. Small problem with the actual delivery date and the one noted on the order form! Otherwise everything's fine!

MEETS OUR EXPECTATIONS.

good design, easy to use

product in a case, did the job of replacing the wishbone silentblocks, to be seen with regard to bearings and use over time

High-quality steel tooling, just deserves an extension for another small box with smaller-diameter sockets.

For the moment just opened for inspection but not used! We can only regret that the diameter of the sockets doesn't go down any further! We'll see if the quality is up to scratch on first use, as the most sensitive part will be the screw threads. If the quality isn't there, it won't stand up well to stress. But for occasional use, I think it should be enough.

Solid tools. Remember to grease rods before use. On the other hand, a complement of smaller "bushes" (under 44mm) would be welcome. I had to use a 27 mm socket to extract a silent block?

Solid, but threaded rod machining of very average quality: you have to screw and unscrew several times with grease so that the nut doesn't stick when screwing and unscrewing.

Good quality product. I managed to remove the rear silent blocks for a bmw e46, except for those on the cradle-side tie-rods - not enough room.

Ideal for mechanics and DIY enthusiasts, available for all car models.

Ras Very good rustic

Very well she saves me...

Good value for money, great for occasional use.

arrival box damaged in a corner

meets my expectations

good product but the threaded rods are brittle

As described. Allowed me to change large Silentblocs. Be careful to grease the axle before use.

Wired rod and nuts not strong enough but the process is good

M12 threaded rod bent, replaced very quickly.

good product, but threaded rods too fragile.

good quality tools, box arrived damaged

psa too much adapted for certain silent bloc engine rod a little too long

The parcel was sent to me in its original box even though I had asked in the order to take care of the packaging given the weight of the parcel. At nearly 20€ postage and packing I expected much better....

not always very effective for certain silent blocks threaded rods bend quite easily

Not Chinese , .... ..........

Unfortunately, the kit suffers from a design flaw: all the ball bearings dislocate at the slightest pressure (which is the very purpose of the tool) in normal manual use. Mecatechnic argues that the lubricated rods of the new kit should have been re-lubricated before use. As if the resistance of slightly less-lubricated screws were greater than that of silent-blocks to be extracted :-)!