Silentbloc tool

This TOOLATELIER kit is ideal for mounting and dismounting silentblocs, bearings and spherical plain bearings.

How to use this silentblocs tool?

This set can be used in 2 ways:
Either manually on a workbench and/or directly on the vehicle, or with a hydraulic press.

What are the technical specifications?

These bushes are 5 mm thick and 60 mm high. The set comprises bushes with external diameters of 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90 mm. Rod threads are 10 x 1.5 / 12 x1.5 / 14 x 1.5 / 16 x 1.5 / 18 x 1.5 mm with a screw length of 350 mm.

Removal and installation tool for the external silent-blocks on the rear suspension arms for Mercedes-Benz.

Applications: W124, W129, W140, W201, W202, W203, W210, W211, W212, W220, W221, W222.

Models: Class, CLK, CL, E, SL, SLK (prior to 2013).

This tool does not require removal of the hub or lower arm.

This tool set enables the front suspension silentblocks to be removed directly from the vehicle without dismantling the suspension arm.
Suitable for MINI One, Cooper, Cooper S (2001), R50 / R53 Chassis W10 / W11 / W17.BMW Mini OE silentbloc part no. 31126757551
Technical information :
Threaded rod: M16 x 2, M12 x 1.75Nut: M16Hexagon drive sleeve: 24 mmBall bearing: 51103Sleeve, inner Ø: 67 mm, outer Ø: 79 mm, length: 75 mmDisc, inner Ø: 17 mm, outer Ø: 78 mmFlat thrust washer, internal thread: M12 x 1.75, external diameter: 77 mmThrust washer, flattened, inner Ø: 68 mm, outer Ø: 77 mmThrust washer, internal thread: M12 x 1.75, outside Ø: 65 mm

Possible uses:

- Caddy 111 from 04/2004 to 08/2010
- Eos from 06/2006
- Golf Plus from 01/2005
- Golf V from 10/2003 to 2009
- Golf VI from 10/2008
- Jetta III from 08/2005 to 10/2010
- Touran from 08/2003
- Passat from 03/2005
- Scirocco from 05/2008
- Tiguan from 09/2007

Applications: Audi A3 from 05/2003 & Audi TT 08/2006 to 06/2010

Possible uses:

- Seat Altea from 03/2004, Leon from 05/2005, Toledo 111 from 04/2004 until 05/2009
- Skoda Octavia from 02/2004 to 12/2010

- forrenewing the rear ball joint bushes
- suitablefor 5 Series E39, 7 Series E38
- includes:
- high-strength spindle
- hexagon nut with collar
- dismantling pressure sleeve
- dismantling holding sleeve, with bearing
- assembly holding sleeve
- mounting pressure sleeve

Set of rear axle siltenbloc pullers for E38 and E39.

Material: S45C steel

Complete set for the removal and installation of rear exterior silent blocks fitted on the camber arm and trailing link of the BMW 1 and 3-Series

Applications:

- BMW 1-Series, E81 to F20 from 2004 to 2012
- BMW 3-Series, E90 to E93 from 2004 to 2012

This tool set enables you to fit and remove rear axle bracket rubber silentblocks on BMW X5 E53 models.

Very practical for replacing the silentblocks without dismantling the bracket.

Weight: 5720 g

This TOOLATELIER tool set is used to fit VAG front silentblocks.

Models concerned :

- Audi A2, Volkswagen PoloIV 9N (2002-2005)
- Skoda Fabia I, Seat Ibiza 6L (2002-2006)
- Cordoba from 2002

Material: S45C steel

Silentblocs cannot be removed.

This kit allows you to install or remove silentblocs positioned behind the front triangles.

Vehicletypes:

- Volkswagen Polo (02-07), Volkswagen Fox (02-07)
- SkodaFabia (02-07) and Seat Ibiza 02 from chassis no. 6K-2-000 001) and theSeatCordoba(02-07)

These TOOLATELIER tools are used to install and remove rear axle silentblocks on the following BMW models:

3 Series E36 and E46, and Z4 E85.

This press is compatible with 72 mm diameter silentblocs.
It allows new silentblocs to be fitted without completely removing the rear axle. (Does not allow extraction).

For Audi A3 type 8L, Volkswagen Golf 4 and Bora, all front-wheel drive models.
(Not for 4Motion or Quattro versions).

- for proper andquick installation
of rubber bushings (silent blocks)
on front axle brackets
- suitable for Audi A2, VW Polo IV 9N (02-05),
Skoda Fabia I, Seat Ibiza 6L (02-06)
and Cordoba from 2002
- material: S45Csteel
- to be used as OEM 3062, 3253/8, T10037

This set ofextractors is ideal for mounting and dismounting wishbone bearings . It is extremely practical, allowing the bearings to be removed directly from the vehicle without disassembling the suspension arm.

Suitable for Mini One Cooper, Cooper S (2001)
Model types: R50 and R53
Chassis number: W10, W11, W17


Composition:

- Rod M16 x 2, M12 x 1.75
- Spindle nut M16
- Hexagonal drive sleeve 24 mm
- Ball bearing 51103
- Sleeve, inner Ø: 67 mm, outer Ø: 79 mm, length: 75 mm
- Disc, inner Ø: 17 mm, outer Ø: 78 mm
- Flat thrust washer, internal thread M12 x 1.75, external diameter: 77 mm
- Thrust washer, flattened, inner Ø 68 mm, outer Ø: 77 mm
- Thrust washer, internal thread M12 x 1.75, outside Ø: 65 mm