359,90 €
ATIComplete conversion kit to upgrade the electrical circuit from 6 to 12 volts, or to switch economically from dynamo to alternator.
Includes :
- 12-volt / 55-amp alternator
- Belt, flanges and mounting accessories
- BOSCH o...
In stock
In stock
3h 04 mins left, for a shipment today
Delivery mode
Home delivery : 126.00€
Collect at store Wambrechies (France) : Free
Description Product
Complete conversion kit to upgrade the electrical circuit from 6 to 12 volts, or to switch economically from dynamo to alternator.
Includes :
- 12-volt / 55-amp alternator
- Belt, flanges and mounting accessories
- BOSCH or BERU 12-volt ignition coil
- Original 12-volt horn
- Blinker / headlight / light relay
- Converter for wiper motor
- Voltage reducer (resistor) 12V ->6V
- Inclined fuel pump push rod
- Carburetor base plate with gaskets
To be provided : 12V carburetor bulbs, starter and choke.
The 6V starter can be kept or replaced by a 12V model with a 29 mm pinion, or 25 mm with a 130-tooth flywheel).
Note: If you replace a dynamo with an alternator, keeping the original carburetor, the pick-up pump cam may touch the alternator body.
You'll need the VC70530 trade-in pump lever.
For VW Beetle
During assembly, you may need to align the alternator pulley with the crankshaft pulley. Remember to order kit VC60011.
Please read carefully:
On some 1200 engines, the position of the dynamo support makes alignment impossible, even with the washer kit. It will not compensate for a misalignment greater than 5mm. It is imperative to take precautions before fitting, as we cannot accept returns if traces of assembly are present.
4.1
14 Feedback
5
6 Feedback
4
6 Feedback
3
1 Feedback
2
0 Feedback
1
1 Feedback
With Trusted Shops, we can improve directly thanks to your comments posted on the MECATECHNIC website
Sort by
Best reviews
Vehicle compatibility
Very good quality product...I will continue to order from your site.
alles
good value for money, its negative part sounds a little bit the alternator bearings but in general very good.
Not yet installed but looks great
Quality price good, no instructions, you have to foresee the pulley 12v, and bushings for the fan, bulbs apart, come some but it is best to buy the rest. The first impression a little noisy I had to free the belt a little because there was a lot of friction.
Show responsesGracias por su comentario ! Nos ayuda mejorar al servicio cliente. Quedamos a su disposición para ayudarle si lo necesita, Podemos encontrar una solución, MEcatechnic team