Ignition harness for Renault Clio 1

Ignition wire kit for Renault Clio Williams and Clio 16S

Includes the 4 spark plug wires and the wire connecting the igniter and the coil.

As the rubber of the wire harness hardens over time and becomes porous and brittle, we recommend replacing it with a new part to avoid ignition problems.

Also suitable for Renault Spider

Assignments:
- 1.8 16 S C575 1764cm3 140hp (F7P720) phase 1 from 1991 to 1993
- 1.8 16 S C57/D 1764cm3 137hp catalytic converter (F7P722) phase 1 from 1993 to 1994
- 1.8 16 S C57/D 1764cm3 137 hp catalyzed (F7P722) phase 2 from 1993 to 1994
- 2.0 Williams C57M 1988cm3 150hp (F7R700) phase 1 from 1993 to 1994
- 2.0 Williams C57M 1988cm3 150hp (F7R700) phase 2 from 1994 to 1996
- 2.0 Spider 1988cm3 150hp (F7R700) from 1995 to 1999

High-performance silicone wiring harness, 7 mm flexible wires
Highly resistant to temperature, oil and chemical products.
Black unmarked wiring harness (no logo) to maintain the original appearance of your engine.

4 75 cm wires, 180°connectors
1 50 cm ignition wire
Head length 180°: 65 mm The 5 wires are supplied with a connector to fit on the Delco cap side, after cutting the wiring harness to the correct length, if required

High-performance silicone wiring harness, 7 mm flexible wires
Highly resistant to temperature, oil and chemical products.
Black unmarked wiring harness (no logo) to maintain the original appearance of your engine.

4 75 cm wires with 90° connectors
1 50 cm wire
Angled head length: 35 mm The 5 wiresare supplied with a connector to fit on the Delco cap side, after cutting thewiring harness to the correct length, if required

High-performance silicone wiring harness, 7 mm flexible wires
Highly resistant to temperature, oil and chemical products.
Black unmarked wiring harness (no logo) to maintain the original appearance of your engine.

6 wires with 180° connectors
2x 80 cm
3 x 100 cm
1 x 120 cm
1 x 130 cm

1 80 cm wire for ignition
Length of head: 65 mm The 7 wires are supplied with a end to fit on the Delco cap side, after cutting the wiring harness to the correct length, if required

Spark plug wire separators secure spark plug wires in the engine compartment.

Color: Black

The spark plug wires separators ensure the fixation of cables in the
engine compartment

Spark plug wire separators secure spark plug wires in the engine compartment.

Diameter: 8 mm

High-performance silicone wiring harness, 7 mm flexible wires
Highly resistant to temperature, oil and chemicalproducts.
Black unmarked wiring harness (no logo) to maintain the original appearance of your engine.

6 wires with 90° connectors
2 x 80 cm
3 x 100 cm
1 x 120 cm
1 x 130 cm

1 80 cm wire for ignition
Length of angled head: 35 mm The 7 wires are supplied with a endto fit on the Delco cap side, after cutting the wiring harness to the correct length, if required

High-quality MSD ignition wire set for 4-cylinder engines.

This ignition wire set is assembled with specific USA-type connectors.
Designed for MSD or Ignitor 2 performance ignitors.

Technical details :
For 4 cylinders
Wire diameter: 8.5mm
Length of coil thread: 92 cm (adjustable)
Ignition cable lengths = 2 x 84 cm 2 x 62 cm
Color: Red

Spark plug wire separators secure spark plug wires in the engine compartment.

Finish : Chrome

This ignition cable forms part of the routine maintenance of a classic car, where the engine’s ignition system remains a critical area requiring regular monitoring. It enables the replacement of a worn, damaged or missing part to ensure the ignition system continues to function correctly. This part is naturally suited to a restoration project or to keeping a vehicle in running order. It thus contributes to the vehicle’s mechanical reliability.

This ignition lead is a new replacement part suitable for the maintenance and restoration of classic vehicles. It ensures the transmission of high voltage between the distributor and the spark plugs, guaranteeing reliable engine ignition. Its replacement is recommended when the original lead shows signs of wear, deterioration or loss of insulation. An essential part for maintaining the proper functioning of a classic engine.

This ignition lead is a new spare part designed for the restoration and maintenance of classic vehicles. It ensures the transmission of high voltage between the distributor and the spark plugs, thereby guaranteeing reliable spark and correct engine ignition. Its replacement is recommended as soon as signs of deterioration, cracking or loss of performance are noticed. An essential part for keeping a classic vehicle in optimal working condition.

The spark plug wire ensures the transmission of high voltage between the ignition distributor and the spark plugs, guaranteeing reliable and regular combustion. As part of the restoration of a classic vehicle, its replacement is an essential step to restore ignition performance in line with the original specifications. A worn, cracked or damaged part can cause ignition misfires and impair proper engine operation. This spark plug wire is therefore an essential replacement part to keep your classic vehicle in optimal condition.

This ignition lead is a new spare part designed to replace a faulty or degraded component on a classic vehicle. It ensures the transmission of high voltage between the ignition system and the spark plugs, thus guaranteeing correct combustion of the air-fuel mixture. Its replacement is an essential step when overhauling an engine on a vintage vehicle. This part contributes to the proper functioning and restored reliability of a classic vehicle.