Carburetor Parts for Volkswagen Transporter T4

Complete float with needle and pin.
Original Volkswagen Classic Parts.

For Pierburg carburettor types: 2E / 2E2 / 2E3 / 2E4

Air correction nozzle for Weber carburetor

Size 250

For Weber :
DCNL
DCO
DCOE
DCO/SP
IDA
IDF

Weber original new part

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

This 32 mm nozzle is designed for Weber carburettors of DCNF type and replaces a worn or faulty original part. In the context of restoration or maintenance of a classic vehicle equipped with such a carburettor, replacement of the nozzle helps to restore correct fuel supply operation. The part is sold individually, which makes it possible to replace only the defective element without having to change the entire carburettor. A solution suited to enthusiasts keen on maintaining their vehicle in working order faithful to the original.

Weber code: 41640.052

This RFPAI-FAIP - Bakelite 5mm thermal shim for Solex 46 carburetors is made by MECATECHNIC.

This spacer for the Solex 46 carburetor is machined from an old-style laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate and limits the effects of vapor lock and self-combustion, preventing fuel from "boiling" in the carburettor bowl.

Requires two base gaskets for installation (not supplied).

Compatible carburetors:
- SOLEX 46 FAIP
- SOLEX 46 RFPAI

If you wish to experience the legendary power of Weber carburettors, but you are faced with space restrictions in terms of fitting an air filter, there is now an alternative.

Our filters positioned on the horns are designed to provide a very high level of filtration. You just need to clean them periodically Fitting onto the horns takes a few seconds.

Very effective, great look, easy to fit and competitively priced.

Suitable for fitting on 45 DCOE carburettor horns
Diameter of horns: 63 mm Filter caps are sold in pairs, alone (without horns or carburetor).

If you're faced with a lack of space to install an air filter, these filter elements on cones offer a solution.

These screened filters on cones are designed to provide a very high level of filtration. Mounting on the cones takes just a few seconds.

High-performance, attractive look, easy installation and competitive price.

Suitable for mounting on WEBER 40 DCOE or other carburetor horns with an overall external diameter of 56 mm.
The cap clips onto the flange of the horn in a trumpet shape, for an attachment diameter of between 52 and 61 mm.
Protective mesh (3 thin/ultra-thin metal layers) is quick and easy to clean. Sold in pairs, without horns or carburettor

Double flange under a WEBER 40 or 45 DCOE carburettor.

The vibrations of prepared engines are harmful to the carburetor and its settings. Protect your carburetors by installing this set of vibration dampers.
WEBER DCOE carburettor baseplate gasket for watertight mounting between intake pipe and carburettor.
Designed for DCOE versions 40 and 45, this gasket can also be used on 48 carburetors (although the aluminum O-ring flange is more suitable for 48 carburetors). For 1 double-barrel DCOE carburetor only

Lower, this cover allows the air inlet to be offset to a cool part" of the engine compartment.
The round base allows 360° orientation." Air inlet pipe or boa notincluded

Venturi suction horns
Suitable for all Empi HPMX, IDF Weber and DRLA Dellorto carburetors.
To optimize carburetor operation: better suction and air guidance. Sold in pairs.
Height: 55 mm
Center distance: 65 mm

Brass float for Weber DCOE carburetor.

Original Weber
Weight: 25g

Emulsion tube for Weber carburettor

Size F11

For Weber :
DCOE
DCO/SP
DCOM
DCNL
DCN
DCO
IDA
IDF

New original Weber part

Lower, this cover allows the air inlet to be offset to a cool part" of the engine compartment.
The round base allows 360° orientation." Air inlet pipe or boa notincluded

Emulsion tube for Weber carburetor

Size F16

For Weber carburetors:
DCOE
DCO/SP
DCOM
DCNL
DCN
DCO
IDA
IDF

New genuine Weber part

Thermoset Wax Capsule for Weber Carburetor

For Weber Carburetor below:
DRTC
TLC
TLP

This choke cap contains a thermodilatable wax that, when heated, operates the choke flap. As the wax loses its properties over time, it is necessary to replace this part to regain proper cold start

Dimensions:
Overall length: 70mm
Tip length: 37mm
Base length: 21mm
Base diameter: 18mm

Original new part from Weber

This set consists of two mini horns to be mounted on the carburettor, enabling the installation of two ultra-flat filters (supplied).
Particularly useful for an assemblywith no space for a large air filter.
Supplied with 2 shorter emulsion tubes. The carburettor in the second photo is for illustrative purposes only, it is not included at the price.

Float for Weber DCOE carburetor

Original Weber
Weight : 18gr

6mm thermal shim for Weber carburetors

For the following Weber carburetors:
DIR
DGV
DGAV
DCD

The thermal shim isolates the carburettor from the heat generated by the engine.
Requires two base gaskets for installation (not supplied)

Ideal for sealing 40mm and 45mm rigid flanges on Weber 40/45 DCOE carburetors.

Original WEBER Starter that fits the following carburetors:
- Weber 40 and 45 DCOE
- Weber 40, 44 and 48 IDF

Reverse Starter: Left-handed operating direction

Return pump square diaphragm
German quality
For Weber IDF 1st generation Carburettor

This kit includes two low profile air horn and mesh filter to be fixed on the carburetor which allow the installation. provided for :

- Weber 45 DCOE carburettors
- Weber 44/48 IDF carburettors

Ideal when you do not have sufficient space for mounting large air filters

Supplied with 2 shorter emulsion tubes. The carburettor in the second photo is for illustrative purposes only, it is not included at this price.

32mm diffuser/venturi for Weber 40 IDF carburettor.

This venturi is only compatible with the latest generation Weber 40 IDF carburettors.

2 required for a carburettor.
Sold individually.

Original WEBER nozzle inspection cover for Weber DCOE carburettors.

For Carburettors:
- Weber 38 DCOE
- Weber 40 DCOE
- Weber 45 DCOE

Accelerator pump diaphragm for Weber carburettor

For Weber carburetor listed below:
26/34 DHSA
28/30 DFTH
32/36 DAC
32/36 DFAV
32/36 DFV
32/34DMTL
32 DAFs
32 DFBs
32 DFDs
32 TFDs
32 DFTA
32/34 TFD
32 DFE-DFM
32 DHS
32 DIF
32 DIR Early
32 DMTR Early
32 BCI
32 ICH
32 ICRs
32 ICT
32 ICH
34 DATC
34 DATRA
34 ICH
34 ICT
36 DCA
36 DCNF
36 DCNFA
36 CVDs
36 DCNVA
36 DCNVH
38 ads
40 DCNF
40 DFOs
42 DCNF
44 DCNF

New original Weber part

Size F15

For Weber carburetor:
DCOE
COD/SP
DCOM
DCNL
DCN
COD
IDA
IDF

New original Weber part

Fixed idling jet to regulate fuel flow through the SOLEX carburettor.
Caliber 55

If the supplier is out of stock, it is possible that you will receive original jets which are reconditioned and checked.

Can be fitted on carburettor:
- SOLEX : KDF, 26 VFI, 26 VFIS, 28 VFIS, 28 PCI, 28 PICT, 28 PICT1, 28 PICT2, 30 PICT1, 30 PICT2, 30 PICT3, 31 PICT3, 31 PICT4, 34 PICT3, 34 PICT4
- BOCAR, BROSOL & repro of 34 PICT3

Idle fuel nozzle for Weber carburettor

Size 55

For Weber carburetors listed below:

DMA
DCA
DCNF
DCNFA
DCNV
DCNVH
IDF
28IMB

Weber original part

Idle nozzle for Weber carburettor

Size 50

For Weber carburetors listed below:

DMA
DCA
DCNF
DCNFA
DCNV
DCNVH
IDF
28IMB

Weber original part

For Weber 45DCOE carburettor

This cup is positioned between the carburettor and the intake manifold.

Material: Aluminium

Requires 2 UC40264 O-rings

This thermal spacer for WEBER 45 DCOE carburetor - Bakelite 8mm is made by MECATECHNIC.

This spacer for the WEBER 45 DCOE carburetor is machined from an old-fashioned laminated phenolic resin that is particularly stable to heat, cold and contact with potentially corrosive liquids and oils, and will not warp.

A thermal shim isolates the carburetor from the heat generated by the manifold. Prevents deformation of the carburettor baseplate, limits vapor lock and self-combustion and prevents fuel from "boiling" in the carburettor bowl.

Requires two shims per carburetor and 2 UC40264 O-rings per shim to fit (not supplied).

Original WEBER starter suitable for the following carburetors:
- Weber 40 and 45 DCOE
- Weber 40, 44 and 48 IDF

Operating direction: clockwise

Suitable for thefollowing Webers:
- DCO
- DCOE
- DCNL
- DCOM
- DCO/SP
- IDF
- 48IDA

Emulsion tube for Weber carburetor

Size F2

For Weber carburetors:
DCOE
DCO/SP
DCOM
DCNL
DCN
DCO
IDA
IDF

New genuine Weber part