Roll bar and arches

Roll Bar with windscreen for Mazda MX-5 NA NB and NBFL

This excellent-value, all-stainless-steel Style Bar comes complete and ready to install.
Compatible with all MX-5 NA, NB and NBFL models, including original windscreen and models with seat-mounted speakers
Can also be used to close the soft top and fit a hardtop without being removed

Plexiglass central windscreen, transparent and colorless, supplied with storage bag, screws and mounting instructions.
Mounts on existing mounting points, requires no modification.

This roll bar is not a safety feature

Chrome-plated roll cage covers for Mazda MX5 NC with convertible top or retractable roof

- Plastic cover with chrome-plating
- 3M double-sided tape fastening
- Covers rear part of the roll cage
- Sold in pairs with the right and left-hand side
Fits Mazda MX5 NC with serial numbers between 100.000 and 199.999

Roll bar for Mazda MX-5 NA and NB

Decorative roll bar for Mazda NA and NB Convertible

Roll bar properties for Mx5 NA and NB

- In polished stainless steel, diameter 60mm
- Decorative roll bar: not a safety feature
- Enables you to fit a wind deflector net

Mechanic-s tip:

- Attach to the edge of the plastic casing on the belt axle (drill hole)
- Compatible with the windscreen Ref: MX10834
Comes without Windschott. (Pictures with Windschott are illustrative pictures)

Roll-bar for Mazda MX-5 NA and NB matte black.

Decorative roll-bar for Mazda convertible NA and NB

Properties of the roll-bar for Mx5 NA and NB

- In stainless steel noit mat with a diameter of 60mm
- Decorative roll-bar: not a safety feature
- Allows installation of a windbreak net

Technical service opinion :

- Can be fixed to the edge of the belt deck's plastic casing (holes to be drilled)
- Compatible with windbreak net Ref: MX10834
Supplied without Windschott (pictures with Windschott are illustration pictures)

Style Bar with mesh for Mazda MX-5 NA and NB

Decorative Style Bar with plexiglass mesh

Style bar properties for Mx5 NA and NB

- Made of polished stainless steel, diameter 60 mm
- Comes with hardware

Mechanic-s tip:

Installation requires removal of the upper rear cover
This roll bar is not a safety feature.

Mazda MX5 NC NCFL roll bar cover

Product properties:

- Fits all NC NCFL roadster models
- Colour ref 35K
- Sold in pairs
- Original MAZDA part
Fits all Mazda MX5 NC NCFL roadster models

Mazda MX5 NC NCFL roll cage cover

- Suitable for NC NCFL roadster models
- Sold in pairs
- Original MAZDA part

4-point rollbar with two DANSK welding brackets, tube diameter 40 mm for Porsche 911 type F and type G without sunroof:
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
Save money by ordering the kit containing both the rollbar and the two welding brackets.
Bolts not included.

Mazda MX5 NC NCFL roll bar cover

Product properties:

- Fits all NC NCFL roadster models
- Colour ref 35J
- Sold in pairs
- Original MAZDA part
Fits all Mazda MX5 NC NCFL roadster models

Mazda MX5 NC NCFL roll bar cover

Product properties:

- Fits all NC NCFL roadster models
- Original MAZDA part
- Sold in pairs
Fits all Mazda MX5 NC NCFL roadster models

DANSK 4-point roll bar, tube diameter 40 mm for Porsche 911 without sunroof :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
bolt-on brackets not supplied with roll bar. Available in associated part numbers.
A bolted rollbar means that it can still be dismantled for roadworthiness testing.
In black storage paint.

Pair of brackets to be welded on the body to bolt the two front points of the roll bar for Porsche 911 from 1964 to 1989:
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989