Thermostat

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 25 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 32 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 35 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 38 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 45 mm

Comes with wiring, relays and clamps

Bleedscrew for Peugeot Citroën :
- Coolant bleed screw for PSA Stellantis 1.6hdi engine.
To know :
- Bleed screw on thermostat block or heater hose .

This device replaces the original radiator temperature sensor switch.
For triggering the original or replacement SPAL electric cooling fan

Setting range: 70 to 120 °C
Thread: M14 x 1.5 mm

Comes with wiring, relays and clamps

This device is for fitting on an engine water hose.
It is used to control the activation of the electric cooling fan.

Setting range: 70 to 120 °C
For hose, inner diameter: 28 mm

Comes with wiring, relays and clamps

Water thermostat 87° - 102°C for Audi 80, 90, Coupé and Cabriolet petrol models from 1972 to 2000 :
Audi :- 80 and 90 Sedan from 1972 to 1996- 80 Cabriolet from 1992 to 2000- Coupé from 1980 to 1996
With petrol engines :- 1.3 (ZF, ZA, EP)- 1.4 (SE)- 1.5 (ZC, YJ, ZB)- 1.6 (YP, YN, XX, YS, WV, SA, DT, YZ,PP, ABB, RN, ABM, ADA)- 1.8 (SF, JN, DS, NE, PV, DZ, SD, RU, PM)- 2.0 (AAD, 3A, ABT, ABK)- 2.0 16V (ACE, 6A)

Water thermostat 87° - 102°C for Audi 100 petrol models from 1976 to 1994 :
- 1.6 (YV)- 1.8 (DS / NP / DR / RS / SH / 4B / PH)- 2.0 (AAD / AAE / ABK)- 2.0 16V (ACE)

Water thermostat 87° - 102°C for Volkswagen Golf 2 petrol :
- 1.6 and 1.8 8s and 16s (including G60)

Water thermostat 87° - 102°C for Volkswagen Golf 3 Sedan and Convertible petrol :
- 1.6 100hp (AEK, AFT, AKS)- 1.8 75hp (AAM, ANN, ANN)- 1.8 90hp (ABS, ADZ, ACC, ANP)- 2.0 107hp (AEP) - 2.0 115hp (2E, ADY, AGG, AKR)

Water thermostat 87° - 102°C for Volkswagen Corrado:
- 1.8 and 2.0 16s 136hp (KR, 9A)- 1.8 G60 160hp (PG)- 2.0 115hp (2E, ADY)

Water thermostat 87° - 102°C for Volkswagen Scirocco petrol :
- 1.5L, 1.6L and 1.8L 8s and 16s

Water thermostat 87° - 102°C for Volkswagen Polo 6N1:
- 1.05 45hp (AEV)- 1.3 54hp (ADX)- 1.6 75hp (AEA)

Water thermostat 87° - 102°C for VW Passat B5 Sedan and Variant:
Sedan :- 2.3L VR5 5 cylinders 150hp from 08/1996 to 09/2000 (engine code AGZ)- 2.3L VR5 5 cylinders 4Motion 150hp from 08/1996 to 09/2000 (engine code AGZ)
Variant :- 2.3L VR5 5 cylinders 150hp from 04/1997 to 09/2000 (engine code AGZ)- 2.3L VR5 5 cylinders 4Motion 150hp from 04/1997 to 09/2000 (engine code AGZ)
This calorostat is located on the water pump.
Opening temperature: 102°CClosing temperature: 87°C

Water thermostat 87° - 102°C for Volkswagen Golf 1 petrol :
- 1.5L- 1.6L- 1.8L (including Oettinger)
Opening: 102°CClosing: 87°C
This water pump calorstat is supplied complete with gasket .

For Golf 4:
- 2.3 150hp (AGZ) up to chassis ->1J-X-800000

For Golf 4 Cabriolet:
- 1.6 100hp (AFT, AKS)
- 1.8 75hp (ANN, AAM)
- 1.8 90hp (ANP, ADZ)
- 2.0 115hp (AGG, AKR, AWG, ATU, AWF)

For Golf 3 :
- 1.9 Diesel 64cv (1Y, AEY)
- 1.9 Turbo Diesel 75cv (AAZ)
- 1.9 TDi 90cv (1Z, AHU, ALE)
- 1.9 TDi 110cv (AFN)

Thermostat - calorstat on water pump
opening : 102°C
closing : 87°C