Wing gasket

Width: 27 mm + 1 5 mm in diameter sealing strip
Length: 8 metres

Width: 32 mm + 1 5 mm in diameter sealing strip
Length: 4 metres

Wing seal
Top quality
Need 4 for one car, sold individually.

For VW Beetle all models

Wing seal roll suitable for the 4 wings of your VOLKSWAGEN 181.
The reproduction of the shape of the original seal is not available on the market for all wings, this original quality gloss black seal roll, will perfectly adjust to the bodywork. To do this we advise you to cut the invisible part of the seal in the angles of the wings so that it can be correctly applied to the bodywork, following the shape of the wing, and as such avoid any bulges or imperfections.

Wing joint roll to be cut into 4 pieces.
Allows 4 wing seals to be fitted.
Standard gloss black

For VW Beetle all models

Front wing seal for Porsche :
- 911 from 1969 to 1989 including Turbo
- 964 from 1989 to 1994 including Turbo

Length: 5 m
Width: 3 cm

Windscreen seal for Porsche :
- 911 from 1965 to 1989
- 930 Turbo from 1975 to 1989

Suitable for right and left-hand sides

Quantity required per vehicle: 2

Rear left-hand wing lower seal for Porsche 911 except Turbo :

- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Rear right-hand wing lower seal for Porsche 911 except Turbo :

- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Rear left-hand wing lower seal for Porsche :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977

Front lower wing connector seal for:
- 911 from 1974 to 1989

Suitable for right and left-hand sides.

Front upper wing connector seal for:
- 911 from 1974 to 1989

Suitable for right and left-hand sides.

This right rear fender seal is located between the rear fender and the right rear bumper of the Porsche 911 type 964 narrow body, in Coupé, Cabriolet and Targa versions :

- 964 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 Carrera RS from 1992

Not suitable for Turbo and Turbo Look

Front fender seal for Porsche 911 and 964 :

- 911 from 1969 to 1989 including Turbo
- 964 from 1989 to 1994 including Turbo

Length : 10 m
Width : 20 mm
Thickness : 2 mm

Protects against rust, body parts in contact.

Glossy black wing gasket for Citroën Traction all models.

Give your Traction a polished finish with this gloss black fender gasket, compatible with all Citroën Traction Avant models: 7 HP, 11 HP and 15 HP.
This 7mm diameter fender clip is compatible with all Citroën Traction 7 HP, 11 HP and 15 HP models.
Suitable for all 4 fenders, it is sold in rolls of 10 meters.

Seal between Karmann-type wing extension and bodywork
Colour:metallic flash silver for same bodywork colour

Wing extension seal for Golf 1 cabriolet with Karmann kit
Colour: metallic stone grey

Seal between Karmann-type wing extension and bodywork
Colour: Alpine white for same bodywork colour

This vertical rear wing gasket for 2cv saloons - black maintains the seal between the body and the rear wings.

This black reproduction of the original 2cv wing panel is attached by 4 5x16mm slotted screws.

Classic Linefront fender gasket for Mercedes W116 all models (1972-1980)
Rubber gasket located on the rear part of the front fender, at door level. Can be fitted on the left or right side.
For Mercedes SL W116 Pagoda all models
Length : 800mm