Extractor

This TOOLATELIER tool set includes 4 extraction sockets for unscrewing broken screws and stubborn studs .

What are the sizes of these extractors ?
The sizes in this set are 6, 8, 10 and 12 mm.

These sockets can be used with open-end wrenches and/or ratchets.

Ideal for removing SPI seals on camshafts, gearboxes, etc.

Quick and easy removal with its 320 mm lever

Size: 12 to 16 mm

Recommendations for use:

- Grease the threaded rod well after each use.
- Position the bevelled cutting part of the tool towards the flat side of the nut.

Material: stainless steel
Length: 135 mm

Contents:

- straight tip
- 90° folded tip for o-rings
- hook tip
- combination tip

6"/150 mm
18mm Jaws
A must for removing damaged nuts and fasteners
Manufactured from Chrome Vanadium
Manufactured from Chrome Vanadium
Also available in 200 mm x 22 mm Jaws

Square: 1/2"
This tool increases the grip and force tenfold thanks to its eccentricity

Nut and bolt extractor set, ideal for sizes 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 and 19 mm.

They can be used with a 12 point wrench or socket and have a hardened black phosphate finish.

These extractors can be used on up to 65% rounded nuts.

This socket survivor is suitable for all screws and nuts, 6 points.

The sizes are 11 to 32 mm. It can be used for metric or imperial sizes.

BGS studpuller :
Suitable for:
- Loosening jammed studs.
- For loosening and tightening.
- For studs with diameters from 6 to 19 mm.

This set of tools is designed to remove drive shafts, bearings, seals, etc. even if they are seized up!

It is used with the pneumatic chisel UO68800 or equivalent.

It contains a long 2-leg extractor, a flat blade extractor, an extractor hook, a gasket extractor, an internal drive shaft extractor and threaded adaptors for attachment to a pneumatic extractor and a pneumatic hammer extractor.

These 9 sockets are very practical for loosening damaged nuts and screws.

Sizes: 10 - 11 - 12 - 13- 14 - 15 - 16 - 17 - 19 mm
Extraction rod: 7 cm
Square drive: 3/8

These TOOLATELIER brand sockets are ideal for loosening damaged or very rounded nuts and bolts.

Sizes: 17 / 19 / 21 / 22 mm
1/2" Square Sockets
Supplied with a rod to help remove a nut jammed in the socket.

- forged carbon steel
- mechanic puller with standard hooks
- parallel puller hooks in every working position
- can be used for inside and outside pulling via detachable and adjustable puller hooks
- jaw depth 100 mm
- jaw width 90 mm
- outer jaw width 70- 140 mm
- 17 mm drive
- weight 1055 g

-Long, flexible model
- Magnet head Ø: 5 mm
- Ø of plastic head: 9 mm
- Max. weight lifted: 120 g

Sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 mm x 50 mm long
Male hex shank: for 1/4" screw-gun
Screw profile: 6 points, hexagonal, BTR type

Sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 mm x 50 mm long
Male hex shank: for 1/4" screw-gun

Sizes: 7/8/10 mm x 38 mm long
Male hex shank:1/2"

Screw profile: 6 points, hexagonal, BTR type

The swirling, conical shape of these tools will enable extraction of bolts and screws with a damaged 6-point head.

Thanks to its 7 mm head diameter, this magnet can easily make its way into the most restricted spaces.

Technical data:

- Head Ø: 7 mm
- Telescopic rod: yes

This all in one tool will be suitable for a wide range of car radios.

What are the correspondences for this tool?

P01: Mercedes, VW, Audi, Becker, Renault, Alpine
P02: Mercedes, Porsche, Becker
P03: VW
P04: Skoda
P05: Becker
P07: Clarion recent models
P08: Kenwood 2002
P09: Sony
P10: Kenwood 98 2001
P11: Fiat Bravo, Brava
P14: Panasonic
1 x hex socket for BMW
1 x hook for Fiat, Grundig, Blaupunkt, Ford, PSA, Renault, Alfa, VW, Audi
1 x hook for Blaupunkt, Peugeot, Clarion

Size: 600 x 11 mm
Head material: steel

Material: satin chrome plated
Total length: 780 mm
Handle length: 205 mm
Dimensions of the square profile handle: 35 x 35 mm
Head width: 16 mm
Head thickness: 2 mm
Dimensions of the square profile rod: 16 x 16 mm