Oil pressure jauge

This mano contact with banana plug for 2CV - 0,5bar - M12
is the oil sight glass relay.

Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.

A worn 2cv pressure switch won't indicate a possible oil shortage, and could lead to engine failure.
Be sure to replace it if you have any doubts.
It's connected by a banana plug.

This flat-plug pressure switch for 2CV4 and 2CV6 (02/1970-07/1990)- 0.5bar - M12 is the oil sight glass relay.
Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.
A worn 2cv oil pressure gauge won't tell you if you're running out of oil, and could lead to engine failure.Be sure to replace it if you have any doubts.It is connected by a flat plug.
compatible models:
- 2CV 4 type AZ KB/A2: 02/1970 to 09/1978- 2CV 6 type AZ KA/A2: 02/1970 to 07/1990

This flat plug pressure switch for AMI8 (03/1969-03/1979) - M12x1.5 is the oil sight glass relay.
Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.
A worn AMI8 oil pressure gauge won't tell you if you're low on oil, and could lead to engine failure.Be sure to replace it if you have any doubts.It is connected by a flat plug.
compatible models:
- AMI 8 Sedan type AM3/AM-JA: 03/1969 to 06/1978- AMI 8 Estate type AM-JB: 09/1969 to 03/1979

This mano contact with banana plug for DYANE and Acadiane - 0.5 bar - M12
is the relay for the oil indicator.

Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.

A worn out pressure switch for a Dyane will not indicate a potential shortage of oil and may cause an engine failure.
Be sure to replace it if you have any doubts.
It is connected by a banana plug.

This flat-plug pressure switch for Dyane and Acadiane (05/1968-03/1987) - M12x1.5 is the oil sight glass relay.
Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.
A worn Dyane oil pressure gauge won't tell you if you're low on oil, and could lead to engine failure.Be sure to replace it if you have any doubts.It is connected by a flat plug.
compatible models:
- DYANE 4 type AYA2: 03/1968 to 08/1975- DYANE D6 type AYA3: 01/1968 to 04/1968- DYANE 6 type AYA3/AYB/AY-CB: 05/1968 to 08/1983- Acadiane type AY-CD: 03/1978 to 03/1987

Two-pole sensor used to connect
the pressure gauge and keep the original warning indicators

Cylinder head oil pressure sensor for Mini III: Mini R55: - Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)
Mini R56: - Cooper 1.6L 120hp from 10/2005 to 08/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper D 1.6L 109hp from 11/2005 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 12/2005 to 02/2010 (engine code N12B14)
- One D 1.6L 90hp from 06/2009 to 07/2010 (engine code W16D16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
Mini R57 : - Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
Mini R58: - Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16)
Mini R59: - Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)

Oil pressure sensor for:
- 911 3.2 Carrera from 1984 to 1989
- 930 3.3 from 1978 to 1983
- 959 2.8 from 1987 to 1988

As we all know, oil is the lifeblood of the VW Type 4 engines in our Beetles and related vehicles.
Keeping the oil at the right temperature is essential. By simply replacing your original dipstick with this oil temperature sensor and reconnecting it to the original oil pressure switch using the kit supplied with instructions and double plug, you'll now be able to monitor your engine's oil temperature without the need for an additional dipstick on the dashboard, with all the associated wiring hassles (extra wires to run, dipstick installation, etc.).
Your oil warning light will now perform two functions: it will continue to function as an oil pressure warning light as before, but it will also become an oil temperature warning light!
Under normal conditions, your light will remain off.
- If the light starts flashing, your engine temperature is getting too high (around 108°C), and it's time to take your foot off the accelerator to lower engine speed or take a break.
- If the light comes on continuously, your engine's temperature is definitely too high (around 115°C) and you need to stop the engine to cool it down.

No more worries in hot weather or traffic jams!

For VW Cox, Karmann-Ghia, type 3 (Notchback, Fastback, Variant), Bay Window and Transporter T25/T3 with type 4 engine
6- or 12-volt operation

Oil pressure valve plug M18 on crankcase for VW Combi Split with Type 1 engine up to 07/1967.
Dimensions 18 x 1.5 mm

Oil pressure sensor
Graduation: 0 to 10 bar
Replace the original contact switch
Thread: M10 x 100

Cylinder head oil pressure sensor for Mini: Mini R58 Coupé : - Cooper S JCW 1.6L 211hp from 12/2010 to 07/2012 (engine code N14B16) Mini R59 Roadster : - Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)

Oil pressure sensor for

- MX5 NC-NCFL 1.8L and 2.0L

This flat plug pressure switch for 2CV Fourgonnette AZU-AKS (07/1970-03/1978) - M12x1.5 is the oil sight glass relay.
Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.
A worn 2cv van oil pressure gauge won't tell you if you're low on oil, and could lead to engine failure.Be sure to replace it if you have any doubts.It is connected by a flat plug.
compatible models:
- 2CV AZU 250 type AZU-B/AK-AP: 01/1972 to 03/1978- 2CV AKS type AK-AK: 07/1970 to 03/1978

This pressure switch with banana plug for AMI6 and AMI8 cars - 0.5bar - M12
is the relay for the oil indicator.

Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.

A worn pressure switch for AMI6 and AMI8 cars will not show when there-s potentially low oil and may cause engine failure.
Be sure to replace it if you have any doubts.
It is connected by a banana plug.

Oil pressure sensor for Mazda RX-8

For RX-8 SE (2003-2008)
Located at the rear left of the engine block

Pressure 0.2 bar
German quality

Mano contact with banana plug for Mehari - 0.5bar - M12
is the relay for the oil indicator.

Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.

A worn out pressure switch for a Mehari will not indicate a potential shortage of oil and may cause an engine failure.
Be sure to replace it if you have any doubts.
It is connected by a banana plug.

Oil pressure valve plug M18 on crankcase for VW Combi Bay Window from 08/1967 to 07/1979 with Type 1 engine.
Dimensions 18 x 1.5 mm

This flat plug pressure switch for Mehari (10/1968-07/1987) - M12x1.5 is the oil sight glass relay.
Screwed directly onto the engine block, it lights up the oil level indicator on your dashboard.
A worn Mehari oil pressure gauge won't indicate a possible oil shortage, and could lead to engine failure.Be sure to replace it if you have any doubts.It is connected by a flat plug.
compatible models:
- Méhari série1 type AY-CA: 10/1968 to 09/1977- Méhari série2 type AY-CA: 09/1977 to 07/1987- Mehari Azur type AY-CA: 07/1985 to 07/1987- Mehari 4X4 type AY-CE: 06/1979 to 06/1983

This oil pressure sensor for Alpine A110 Berlinette (01/1967-04/1973) is a quality reproduction.

This oil pressure sensor for Alpine A110 Berlinette is compatible with 1300, 1500 and 1600cc engine models.
Compatible models:

- Berlinette A110 1300 S - type 1300 VB (10/1967-09/1970)
- A110 GT4 Coupé - type 1300 LVA (01/1968-1970)
- Berlinette A110 1300 G - type 1300 VA (01/01967-06/1971)
- Berlinette A110 1500 - type 1500 VA (03/1967-09/1968)
- Berlinette A110 V85/1300 - type 1300 VC (10/1969-12/1976)
- Berlinette A110 1600 - type 1600 (09/1968-?/1969)
- Berlinette A110 1600 - type 1600 VA (1969)
- Berlinette A110 1600 - type 1600 VB (1969-1970)
- Berlinette A110 1600S - type 1600 VA (1969)
- Berlinette A110 1600S - type 1600 VB (10/1969-04/1973)
- Berlinette A110 1600S - type 1600 VC (01/1973-04/1973)