Cable accessories

Universal rubber cap to protect and isolate starter terminals.

Length: 6.7cm
Diameter 1: 26mm
Diameter 2: 20mm

Heating system cable pivot for:
- 911 from 1965 to 1986
- 930
- 912
- 914

This ergonomic grommet allows power cables to pass over the roofs of motorhomes, caravans and converted vans. Ergonomically designed, it reduces wind resistance. It has a groove on the inside for better bonding. It also features a watertight cable gland made of ASA plastic for better resistance to UV and weathering.
Dimensions (mm): 120 x 90 x 40.

Roof feed-through with threaded sleeve for connection of multiple wires via 4 entries. Practical for use on roofs with multiple devices (antennas, solar panels, etc.).
Dimensions (mm): 120 x 90 x 30 mm, roof thickness 60 mm max.
Diameter: 28 mm.

Hand brake cable adjusting nuts for VW Combi Bay Window from 08/1971 to 07/1979

Rubber gasket for locking the gas pedal tube for VW Combi Bay Window from 08/1970 to 07/1979 with Type 1 engine (1200 to 1600).Not suitable for 1600 CT engine

Rubber heating system cable cap for:
- 911 from 1965 to 1989
- 912

Rubber case for bonnet opening cable for:
- 914

Starter "+" cable sleeve for:
- 356
- 911
- 912
- 914
- 924
- 944
- 964
- 968
- 993

Heating system cable sheath for Porsche 911, 912 and 930 :

-> Porsche 912 :
- 912 1.6 - 90 hp (616.36) from 1966 to 1969
- 912 E 2.0 - 90 hp (923.02) from 1976

-> Porsche 911 :
911 2.0 - 130 hp (901.01/05/06) from 1965 to 1967
911 S 2.0 - 160 hp (901.02) of 1967
911 T 2.0 - 110 hp (901.03/13) from 1968 to 1969
911 L 2.0 - 130 hp (901.06/07) of 1968
911 S 2.0 - 160 hp (901.02/08) of 1968
911 E 2.0 - 140 hp (911.09/11) of 1969
911 S 2.0 - 170 hp (901.10) of 1969
911 T 2.0 - 110 hp (901.16/19) of 1969
911 T 2.2 - 125 hp (911.03/06) from 1970 to 1971
911 E 2.2 - 155 hp (911.01/04) from 1970 to 1971
911 S 2.2 - 180 hp (911.01) from 1970 to 1971
911 Tv 2.4 - 130 hp (911.57/67) from 1972 to 1973
911 E 2.4 - 165 hp (911.52/62) from 1972 to 1973
911 S 2.4 - 190 hp (911.53/63) from 1972 to 1973
911 Carrera RS 2.7 - 210 hp (911.83) of 1973
911 2.7 - 150 hp (911.92/97) of 1974
911 2.7 - 150 hp (911.41/46) of 1975
911 2.7 - 165 hp (911.81/86) from 1976 to 1977
911 S 2.7 - 175 hp (911.93/98) of 1974
911 S 2.7 - 175 hp (911.42/47) of 1975
911 Carrera 2.7 - 210 hp (911.83) from 1974 to 1976
911 Carrera 3.0 - 200 hp (930.02/12) from 1976 to 1977
911 SC 3.0 - 180 hp (930.03/13) from 1978 to 1979
911 SC 3.0 - 188 hp (930.09/19) of 1980
911 SC 3.0 - 204 hp (930.10) from 1981 to 1983
911 Carrera 3.2 - 231 hp (930.20) from 1984 to 1986
911 Carrera 3.2 - 207 hp (930.21) from 1985 to 1986

-> Porsche 930 Turbo :
911 Turbo 3.0 - 260 hp (930.50 / 52) from 1976 to 1977
911 Turbo 3.3 - 300 hp (930.60 / 66) from 1978 to 1986

Bellows for speedometer cable for Porsche 911 type F and G from 1970 to 1977 :

- Porsche 911 type F :

- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977

Cable clevis pin for:
- 911 from 1965 to 1986

Pedal silentblock for gas pedal cable Bmw 7 Series E32:

Bmw 7 Series E32:

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)

Rubber bumper forfixing gas pedal cable to crankset.

Heating system cable connection for:
- 911 from 1985 to 1986