Glazing tool

Ideal for installing and positioning without damaging the plastic/rubber seals around the windscreen on old vehicles.

Contents:

- 1 accessory holder
- 2 pressure accessories in 10.5 mm and 17 mm
- 2 installation tool with Allen key.

This tool separates the seal for installing the chrome bar.
For an easier installation it is necessary a little of soap (or liquid soap) in this way the chrome bar and the tool will slide in the seal space.

This suction gun can be very easily used with one hand.

It is very useful when changing a window mechanism, or even for trouble-shooting in the case of a broken mechanism.

It can also be used to straighten dented bodywork.

Diameter: 7 cm

What is this optical renovator kit used for?

Over time, headlights become dull and the polycarbonate surface deteriorates due to external attacks from the sun (UVs), the products used in car washes amongst other things.
Thanks to the polishing paste and different abrasive products provided, you will give your headlights a new lease of life.

Contents: 2 polishing pastes - 40 grams, 2 UV adhesives- 3 ml, 1 adhesive masking tape and 2 sponge pads

This set complies with ROHS and REACH standards

Over time, sun, dirt, acid rain and salt can yellow, obscure and cover the transparent plastic covers over your headlights. Headlights that are too matte represent a genuine risk in terms of safety. Their brightness reduces, along with your visibility when it gets dark. This also represents a danger to other drivers.

The included sealer will also provide additional and complete protection for your headlights. Its unique formula creates a long-lasting layer that protects against rain, solvents and all adverse weather conditions. The smooth, dust-inhibiting coating means that your headlights stay clean for longer.

Applied regularly, the anti-UV protection contained in the product prevents your headlights from yellowing and tarnishing again.

Autobest screwdriver opticsrestorer :
- This kit restores clarity and brightness to your headlights for better night vision. Prevents your vehicle from being inspected for opaque lights. This renovation kit is designed to eliminate damage, yellowing, oxidation and scratches on plastic headlight lenses. It is designed to restore 2 headlight lenses. It includes everything needed to restore the most degraded optics. It also delivers excellent results on most le optics, such as car taillights, trailers, boat windows, motorcycle windscreens, snowmobiles and more.
Kit contents :
- 1 bodybuilder's masking tape.- 1 Ø 75mm polishing plate with hook-and-loop fastener for drill chuck.- 6 Ø 75mm circular abrasives: 2 grit 800, 2 grit 1200, 2 grit 2000.- 1 orange polishing pad Ø 75mm with hook-and-loop fastener.- 2 polishing paste sachets.- 1 Ø 50mm white hand applicator pad.- 2 sachets of anti-UV liquid.

TEROSON PU 8519 P all-in-one primer and activator is a liquid, solvent-based polyurethane masking primer for use prior to windscreen bonding. It promotesadhesion and UV protection of glazing adhesives/seals . Recommended for use on glass, paint, ceramics and windscreens. It reactivates residual beads. It also provides corrosion protection for small areas of exposed metal (scratches, dents, etc.).
TEROSON PU 8519P is suitable, for example, for coating the conductive surfaces of heated laminated-glass windscreens with an opaque black layer.

Advantages :
- Excellent UV protection.
- Reactivation of residual beads (if not re-glued for more than 2 hours).
- Evaporation time: approx. 2 minutes, even in cold environments (for two-component glazing adhesives, wait 15 minutes).
- Promotes adhesion of glazing adhesives and seals.
- Protects against corrosion.

Please observe safety precautions.

LOCTITE SF 7063 degreasing cleaner is a general-purpose product for cleaning and degreasing all surfaces or mechanical parts prior to repair, assembly or bonding with LOCTITE adhesives and joint compounds. It is a CFC-free solvent-based cleaner which leaves no residues. It removes all traces of grease,oil, lubricating fluid or fine particles. Your surfaces will be perfectly cleaned before assembly.

Advantages :
- CFC-free, solvent-based cleaner.
- Ideal for surface preparation prior to bonding and sealing.
- Removes grease, oil, lubricants, metal chips and fine particles from surfaces.
- Leaves no residue.

Directions for use :
- Treat surfaces to be cleaned by spraying or wiping with a solvent-soaked wipe.
- Wipe surfaces still damp with clean paper to remove heavier soiling.
- Repeat if necessary.
- Allow sufficient time for the product to evaporate and the surface to dry thoroughly.
- Apply LOCTITE adhesive or joint compound immediately after drying and proceed with assembly.

Please observe all safety precautions.

Replacing a window-lift mechanism often requires the window to be held in the upright position.

Thanks to these suction cups connected by a steel strap, the operation is simple and you'll have both hands free to work.

Tip: Make sure that the glass is clean and free of grease to ensure that the suction cups hold properly.

This flexible windscreen wire is ideal for cutting the glued seal.

It has a braid of 3 individual steel wires 25 m length with a thickness of 0.9 mm.

Bodywork repair - Glazing adhesive, single-component polyurethane.

Vehicle ready to drive in 1 hour in accordance with the FMVSS standard and in 4 hours in accordance with European automotive standards.

TEROSON PU 8597 HMLC is a single-component galzing adhesive used to replace windscreens when a high level of safety must be guaranteed. Vehicle ready to drive in 1 hour in accordance with the American FMVSS standard and in 4 hours in accordance with the most exacting European automotive crash tests.

- Product benefits:

Meets the most exacting European standards
HMLC (high modulus, low conductivity)
Good sag resistance
No retraction
Product approved by the TÜV
Complies with manufacturer requirements

- Techncial specifications:

Base: single-component polyurethane
Vehicle return time: FMVSS 1 hr, European standards 4 hrs
Method of application : / work time: cold / 20 mins

Area of application:

- For surface preparation of glass and automotive parts (glass, plastic, metal)
- Application with lint-free cloth or brush.
- Unique silicone stain remover for optimal surface preparation.

Features :

- Universal cleaner, glass and plastic repair, silicone remover.
- Application with lint-free cloth or brush
- Very short drying time
-Product base: white spirit
- For surface preparation on paint, metal and plastic

Application :

- For preparing glazing operations and surfaces (glass, plastic, metal).
Apply with a clean cloth or brush (Teroson FL is a thinner that can be used with other Teroson products).

These handles are used to position windscreen piano wire; you secure it with the conical end. It makes it easier to pull the cable when cutting the windscreen gasket.

These blades are specially designed to prevent damage to the paint when removing excess urethane after windscreen removal.

This kit has 3 finned blades of 13, 19, 25 mm and a 40mm wide preparation blade.

The blades are easily interchangeable thanks to the handle and its hex screw.

- for not bonded / sticked windscreens
- includes the following tools:
- role handle for easy redirect of the rope
- ball handle 210 mm, angled for non-destructive
lifting the sealing rubber
- hook handle 210 mm, 45° angled and
hook handle 270 mm, 90° angled, facilitated
the installation of the sealing rubber
- guide handle 220 mm, for tracking the installation
rope
- installation rope 6.0 m

- adapts to curved surfaces, making it easier to insert
wires in vehicles with deep cockpits
- wire insertion is made easier by the fork opening
- made of stainless steel
- slotted head
- T-handle for easy operation

Contents:

- 1 hand knife
- 1 wire feeder/starter tool
- 2 wire handles
- 1 tool for removing the rods and rings
- 1 reel of wire (1.80 m)

This set of suction cups is ideal for professionally removing glued windscreens.

The suction cup is 150 mm with a hand pump for a secure fit on the glass. The maximum capacity per suction cup is 50 kg.

To be used with the TB04935 windscreen wire/piano wire or equivalent.

- with quick release lever
- ideal for removing little body dents etc.
- max. capacity: 5 kg

This hand-held suction pad features a quick-release fastener for ease of use. Its 115mm diameter and 50kg lifting capacity is ideal for lifting glazing, mobility and household appliances....

The handle is finished in metal.