Lighting for BMW E32

White left turn signal repeater for Bmw 7 Series E32:

- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 08/1994 including 750i v12.

For driver's side.

Supplied withoutbulb holder.

Right front white headlamp for Bmw 7 Series E32 :

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 09/1989 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 09/1989 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 09/1989 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 09/1989 to 07/1992 (engine code m30b35)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)
- 750i 12cyl 300hp from 09/1989 to 03/1994 (engine code m70)
- 750iL 12cyl 300hp 09/1989 to 03/1994 (engine code m70)
- 750iLS 12cyl 300hp from 09/1989 to 03/1994 (engine code m70)

Not suitable for Xenon installation.

Suitable for passenger side.

Supplied without bulbs (H1) and without electric adjustment motor.

Orange left turn signal repeater for Bmw 7 Series E32:

- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 08/1994 including 750i v12.

For driver's side.

Supplied withoutbulb holder.

White right turn signal repeater for Bmw 7 Series E32:

- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 08/1994 including 750i v12.

Suitable for passenger side.

Supplied withoutbulb holder.

White front left lamp for Bmw 7 Series E32 :

Bmw 7 Series E32 :

- 730i 6cyl 197hp from 09/1989 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 09/1989 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 09/1989 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 09/1989 to 07/1992 (engine code m30b35)
- 740i 8cyl 286hp from 09/1991 to 03/1994 (engine code m60b40)
- 740iL 8cyl 286hp from 10/1991 to 03/1994 (engine code m60b40)
- 750i 12cyl 300hp from 09/1989 to 03/1994 (engine code m70)
- 750iL 12cyl 300hp 09/1989 to 03/1994 (engine code m70)
- 750iLS 12cyl 300hp from 09/1989 to 03/1994 (engine code m70)

Not suitable for Xenon installation.

For driver's side only.

Supplied without bulbs (H1) and without electric adjustment motor.

Orange right turn signal repeater for Bmw 7 Series E32:

- Compatible with all Bmw 7 Series E32 versions from 10/1985 to 08/1994 including 750i v12.

Suitable for passenger side.

Supplied withoutbulb holder.

Chrome-plated product

12 V 55 W bulbs included
Instructions in English supplied

Lens:
- Diameter: approximately 127 mm
- Thickness: approximately 70 mm

Mounting:
- Diameter of screw thread: 10 mm
- Length of rod: 25 mm

HELLA Comet 500 long-range floodlight with yellow glass.

The headlight comes with its own HELLA plastic protection and with an H3 bulb.

Specifications:
- Voltage: 12 and 24 Volts
- Diameter: 163 mm
- Height: 176 mm
- Depth: 67 mm

WIPAC SLIMLINE driving lamps 6"
H3 12V 100W bulbs included
Wipac 4x4 removable plastic stone guards supplied
Instructions in English supplied

Lens:
- Diameter: approximately 152/170 mm
- Thickness: 80 mm approximately

Mounting:
-Diameter of screw thread: 10 mm
- Length of rod: 25 mm

Sealed Beam US headlight optics for H4 bulbs: 6 or 12 volts. Replaces original headlights for better lighting. Model diameter 7 inches (17.78 cm). Fits on US bracket without modification. Economical, as it allows you to keep the optics for a simple bulb change. Supplied without bulb. Sold individually.
Domed model with pilot light slot

For VW with American headlights (USA) using VA17008:
- Beetle, all years
- Karmann-Ghia, 11/1963 ->07/1974
- Combi Split, until ->07/1967
- Combi T2 Bay, 08/1967 ->07/1979
- Kübel 181, 08/1969 ->12/1979
- Type 3, 04/1961 ->07/1973

US-type sealed beam headlight bulb
12 volts - 50/60 watts
3-pin cap
Diameter: 178 mm
Left or right-hand. Sold per unit.
for right-hand drive
for American headlights only.

Universal flasher or position light
luxury finish with chrome surround
supplied with rubber gasket.
Outside diameter: 64 mm / with gasket: 70 mm
Operates with 5W shuttle bulb
Sold in pairs Bulb supplied

MARCHAL foglight projector
Sold individually. Diameter 15cm, depth 13cm

Vintage option, universal light
allows you to equip your vintage car with a reversing light
Chrome finish, standard quality

Universal turn signal or position light
Luxury finish with chrome surround
supplied with rubber gasket.
Outside diameter: 64 mm / with gasket: 70 mm
Operates with 5W 35 mm shuttle bulb (supplied).
Sold in pairs

12 V 55 W H3 bulbs included
Wipac plastic protectors supplied
Instructions in English supplied

Lens:
- Diameter: approximately 137 mm
- Thickness: 65 mm approximately

Mounting:
-Diameter of screw thread: 10 mm
- Length of rod: 25 mm

Can be mounted on a 2 door vehicle (modification of connections)

2 180 mm Cibié Oscar headlight protective cap
Sold by pair

HELLAhomologated additional brake light, universal and suitable for surface mounting. Thanks to its self-adhesive surface, simply stick the light to the inside of your rear window to secure it in place.

The angle of illumination of this brake light is also adjustable in the inner part of the light over an arc from 26° to 75°.

This brake light comes complete with bulbs, wiring and quick-disconnect fittings.

Technical details:
- Voltage: 12 Volts
- Bulbs: Wedge W5W (supplied with light)
- Dimensions: 19 x 8 cm

Additional round chrome fog lamps
Wipac" plastic covers included
12V 55W bulbs included
Instructions/wiring diagram (English)

Optics :
- Diameter 137 mm approx.
- Thickness 65 mm approx.
Mounting :
- Thread diameter 10 mm
- Rod length 25 mm Recommended mounting: with a type 30/85/86/87 4-pin relay, NOT supplied in this kit.

Sold per unit, for American headlights only

Pair of red universal lights.
Used to indicate position (no stop light).
Deluxe finish with chrome surround
Supplied with rubber seals.
Outside diameter: 64 mm / with gasket: 70 mm
Operate with 5W shuttle bulbs (supplied)
Sold in pairs, not CE approved.

Red fog light
Rear: Chrome-plated
Dimensions: 100 x80 x 65 mm
Manufacturer: HELLA

Bulb (not supplied):
- 6 volt,21 watt
or
- 12 volt, 21 watt

This chrome-plated STOP light will be perfect for your old car! This replica of an accessory that was very popular in the 50s/60s willallow you to combine elegance and safety. It is supplied with its seal forperfect sealing and equipped with a 12 V bulb that can be replaced with a 6 V bulb. Connects easily to your current STOP lights, which will light up whenever you brake. You can see at night!

Length: 18 cm
Height: 8.7 mm
Depth: 9 cm

Isattached using a M8 central screw.
H3 bulb included

Bulb not included

Dimensions: 13.5 cm x 6.5 cm x 6.5 cm
Supplied with nuts and bolts

Fitted on the front or rear of your vehicle.
Bulb not included
Sold per unit

HELLA additional fog lamp kit. This universal kit lets you add high-performance fog lamps to your vehicle. These fog lamps provide powerful illumination through a smooth, transparent lens, with extremely even light distribution for optimum illumination of the road surface without light loss.

This kit includes all the components needed to fit these headlamps.
It includes :
- 2x Hella optics
- 2x H7 bulbs
- Beam
- Relay
- Switch

Technical details :
Width: 155.5 mm
Height: 64 mm
Depth: 100 mm

Red rear LED position & stop light - Red plastic
Diameter: 73 mm
Depth: 39.7 mm
Waterproof (IP67 standard)
"E" Label and "SAE" approved
Multi-voltage: 9-33 V
Electrical connector: AMP
Stainless steel nuts and bolts supplied.

FIA high-intensity LED rain tail light with beam housed in a waterproof plastic case. Sold individually.

FIA-approved for circuit use only.

Dimensions: 102 x 92 x 20 mm

Orange LED indicator - Orange plastic
Diameter: 73 mm
Depth: 39.7 mm
Waterproof (IP67 standard)
"E" Label and "SAE" approved
Multi-voltage: 9-33 V
Electrical connector: AMP
Stainless steel nuts and bolts supplied.

Orange LED indicator
Diameter: 95 mm
Depth: 35 mm
Waterproof(IP67 standard)
"E" Label
Multi-voltage: 9-33 V

This white lens is the replacement glass specific for HELLA reverse lights of the VA15810 and VA15812 series, two references frequently found on classic vehicles. It allows you to replace a cracked, yellowed or missing lens without having to change the entire rear light, which represents an economical solution and faithful to the original during a restoration. Its fitting in place of the original part guarantees a presentation compliant with the factory output state of the vehicle. An essential new part for any enthusiast concerned with attention to detail when restoring their classic vehicle.