Seat for Citroën Ami 6, Ami 8

This bag of 50 elasticated seat bands for AMI 6 and AMI 8 cars is compatible with all models.


This bag of 50 elasticated bands contains the quantity you need to repair a seat. You will need 2 of them for a complete bench seat repair.

Installation tips:
- Prepare the burlap or reinforced seat cloths by spreading the fibres evenly with a pointed object or a simple nail, opposite the holes in the frame.
- Mount the elastics symmetrically, one on the right and one on the left, to make it easier for you to mount them on the frame. If you mount one side first, it will be very difficult to mount the other.

This foam kit for a whole seat - seat and backrest - for AMI 6 and AMI 8 cars is compatible with all models.

These 2 pieces of seat foam, one for the seat and one for the backrest, will make your symmetrical or asymmetrical seats comfortable.

Assembly advice:
- Cut the foam with a cutter or good scissors to fit your seat, leaving 2 to 3 cm excess on the frame.
- Glue the seat covers and foam with neoprene contact adhesive and lay them down, pressing them down firmly as soon as the adhesive is dry to the touch.

Driver's side tub in black fabric with backrest tilt adjustment via side handle
Supplied without rails
Bottom mounting (spacing x length): 345 x 270 mm Weight: 11.20 kg
Backrest height: 85 cm
Backrest width: 36 cm (outside: 56 cm)
Seat length: 53 cm
Seat width: 32 cm (outside: 48.5 cm)

Passenger bucket seat in black fabric with backrest tilt adjustment via side-mounted handle<.

Driver-side bucket seat in black faux leather, with seat back inclination adjustment via the handle on the side.
Supplied without rails
Bottom fixing (wide x length): 345 x 270 mm Weight:11.20 kg
Height of seat back: 85 cm
Width of seat back: 36 cm (outside: 56 cm)
Length of the seat: 53 cm
Width of the seat: 32 cm (outside: 48.5 cm)

Passenger side seat in black leatherette with backrest tilt adjustment via side-mounted handle
Supplied without rails
Bottom bracket (spacing x length): 345 x 270 mm Weight: 11.20 kg
Backrest height: 85 cm
Backrest width: 36 cm (outside: 56 cm)
Seat length: 53 cm
Seat width: 32 cm (outside: 48.5 cm)

Bare plastic bucket seat of the 356 type for covering. Plastic model (stronger than polyester). Left or right side, sold individually.

Indicative dimensions:
- Width: 450mm
- Height: 546mm

Not FIA-certified.

Driver's side seat in black alcantara with backrest tilt adjustment via side-mounted handle
Supplied without rails
Bottom mounting (spacing x length): 345 x 270 mm Weight: 11.20 kg
Backrest height: 85 cm
Backrest width: 36 cm (outside: 56 cm)
Seat length: 53 cm
Seat width: 32 cm (outside: 48.5 cm)