Front lowering: 25mm Rear lowering: 25mm The lowering may be less significant if you have an original sport chassis Stiffer spring rate of approximately 25%
This set of short springs RACING BEAT is suitable for installation with sport shock absorbers such as Bilstein B6 or original type shock absorbers If your shock absorbers are original, we recommend replacing them at the same time!
A RACING BEAT short spring kit will significantly improve the handling of your MX-5. The center of gravity will be lowered and will reduce body roll effects in corners.
Front lowering: -35mm Rear lowering: 30mm This EIBACH spring set can be fitted with original shocks or sport shocks like Bilstein B6 Your centre of gravity will be lowered for a sporty look, and it greatly improves your handling!
Set of 4 RACING BEAT short springs for Mazda MX-5. Not suitable for NBFL. Front lowering: 25mm. Rear lowering: 20mm. The lowering may be less significant if you have an original sport chassis. Firmness rating about 25% firmer. This set of RACING BEAT short springs is suitable for installation with sport shock absorbers such as Bilstein B6 or original type shock absorbers. If your shock absorbers are original, we recommend replacing them at the same time! A set of RACING BEAT short springs will significantly improve the handling of your MX-5. The center of gravity will be lowered and will reduce body roll effects in corners.
Set of 4 MTS Technik short springs for Mazda MX5 NB and NBFL
These springs, developed by MTS Technik, can be installed in place of your original springs, on original or sport-type shock absorbers. They lower your MX5 by 30mm. Your center of gravity will be lowered for sporty handling!