Mecatechnic

Show product details

Axle

Assembly side

22 Results

sort by

Only 1 left in stock

159,90 €

Reconditioned rear left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00340

Only 2 left in stock

139,90 €

Reconditioned ATE front right caliper for Mercedes W126 - 60mm

Ref: MB30007

Genuine reconditioned front right brake caliper for Mercedes S Class

This reconditioned ATE right front brake caliper for Mercedes S Class W126 with 2 pistons diameter 60mm is an original reconditioned part.

This ATE right front brake caliper for Mercedes W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning offered on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W126 :
- 260 SE (126.020) from 01/1980 to 08/1985
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 380 SE (126.032) from 09/1979 to 08/1981
- 380 SE (126.032) from 09/1981 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1981
- 380 SEL (126.033) 09/1981 to 08/1985
- 500 SE (126.036) from 09/1979 to 08/1985
- 500 SEL (126.037) from 09/1979 to 08/1985
- 560 SEL (126.039) from 01/1980 to 08/1985

ATE mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 1 left in stock

139,90 €

Reconditioned GIRLING front right brake caliper for Mercedes S Class C126

Ref: ZZ00351

This reconditioned GIRLING front right caliper for Mercedes C126 S Class is an original reconditioned part.

This right front brake caliper is an original cast aluminium part. It has been refurbished in strict compliance with the original by our partner.

Our reconditioned calipers benefit from the best quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead blasting, new inspection, surface treatment, new inspection, engraving, automatic replacement of all components other than the cast body, even the pistons, everything is carried out by our ISO 90001 certified partner.

Compatible models:

-380 SEC (126.043) : 10/1981 - 07/1985

-500 SEC (126.044) : 08/1980 - 08/1985

Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply stick the postal return label, pre-addressed to MECATECHNIC, that you will receive with your reconditioned caliper and send it back to us. This will speed up the processing and reimbursement of your deposit.

Please ensure that you comply with the following conditions when returning your deposit:

- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and SDO.

- It must be drained of all brake fluid and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).

- The bolts, clips, connection screws and bleed screws must be present in the package.

- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.

- Each stirrup will be checked individually on three occasions: on receipt of the order by MECATECHNIC before dispatch to our partner, on receipt by our partner before cleaning and repackaging (NB: During the galvanising process, major defects (micro-cracks) may appear which were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. The inspection of your caliper takes 6 to 8 weeks from the time MECATECHNIC receives the consignment. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 1 left in stock

159,90 €

Reconditioned rear right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00341

Only 1 left in stock

139,90 €

Reconditioned GIRLING front left brake caliper for Mercedes S Class C126

Ref: ZZ00350

This reconditioned GIRLING front left caliper for Mercedes S Class C126 is an original reconditioned part.

This left front brake caliper is an original cast aluminium part. It has been refurbished in strict compliance with the original by our partner.

Compatible models:

-380 SEC (126.043) : 10/1981 - 07/1985

-500 SEC (126.044) : 08/1980 - 08/1985

Return and refund conditions for returnable parts

Please ensure that you comply with the following conditions when returning your deposit:

- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and SDO.

- It must be drained of all brake fluid and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).

- The bolts, clips, connection screws and bleed screws must be present in the package.

- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.

Only 3 left in stock

124,90 €

Reconditioned ATE left rear caliper for Mercedes W114 and W115 - 38mm

Ref: MB31012

Genuine reconditioned left rear brake caliper for Mercedes S Class

This reconditioned ATE left rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This ATE left rear brake caliper for Mercedes W116 and W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 09/1972 to 07/1980
- 350 SEL (116.029) from 09/1972 to 03/1980

For Mercedes S Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1981 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) 09/1985 to 10/1991
- 420 SEC (126.046) 09/1985 to 10/1991

ATE mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Girling) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 4 left in stock

124,90 €

Reconditioned ATE right rear caliper for Mercedes W114 and W115 - 38mm

Ref: MB31013

Genuine reconditioned right rear brake caliper for Mercedes S Class

This reconditioned ATE right rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This ATE right rear brake caliper for Mercedes W116 and W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 09/1972 to 07/1980
- 350 SEL (116.029) from 09/1972 to 03/1980

For Mercedes S Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1981 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) 09/1985 to 10/1991
- 420 SEC (126.046) 09/1985 to 10/1991

ATE mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Girling) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 2 left in stock

127,90 €

Reconditioned Bendix right front caliper for Mercedes W126 - 60mm

Ref: MB30023

Genuine reconditioned front right brake caliper for Mercedes S Class

This reconditioned Bendix right front brake caliper for Mercedes S Class W126 with 2 pistons diameter 60mm is an original reconditioned part.

This Bendix right front brake caliper for Mercedes W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W126 :
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 380 SE (126.032) from 09/1979 to 08/1981
- 380 SE (126.032) from 09/1981 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1981
- 380 SEL (126.033) 09/1981 to 08/1985
- 420 SEC (126.046) from 01/1980 to 08/1985
- 500 SE (126.036) from 09/1979 to 08/1985
- 500 SEL (126.037) from 09/1979 to 08/1985

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 2 left in stock

108,90 €

Reconditioned Bendix front left caliper for Mercedes W126 - 60mm

Ref: MB30022

Genuine reconditioned left front brake caliper for Mercedes S Class

This reconditioned Bendix left front brake caliper for Mercedes S Class W126 with 2 pistons diameter 60mm is an original reconditioned part.

This Bendix left front brake caliper for Mercedes W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning offered on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W126 :
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 380 SE (126.032) from 09/1979 to 08/1981
- 380 SE (126.032) from 09/1981 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1981
- 380 SEL (126.033) 09/1981 to 08/1985
- 420 SEC (126.046) from 01/1980 to 08/1985
- 500 SE (126.036) from 09/1979 to 08/1985
- 500 SEL (126.037) from 09/1979 to 08/1985

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 4 left in stock

120,90 €

Refurbished Bendix left rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30026

Genuine reconditioned left rear brake caliper for Mercedes S Class

This reconditioned Bendix left rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This Bendix left rear brake caliper for Mercedes W116 and W126 is an original part. It has been refurbished in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 09/1972 to 07/1980
- 350 SEL (116.029) from 09/1972 to 03/1980

For Mercedes S Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1979 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 4 left in stock

109,90 €

Reconditioned Girling left rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30030

Genuine reconditioned left rear brake caliper for Mercedes S Class

This reconditioned Girling left rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This Girling left rear brake caliper for Mercedes W116 and W126 is an original part. It has been refurbished in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 08/1975 to 08/1979
- 350 SE (116.028) from 07/1975 to 08/1979
- 350 SEL (116.029) from 08/1975 to 08/1979

For Mercedes S-Class W126 :
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1979 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991

Girling mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Girling) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 2 left in stock

109,90 €

Reconditioned Girling right rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30031

Genuine reconditioned right rear brake caliper for Mercedes S Class

This reconditioned Girling right rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This Girling right rear brake caliper for Mercedes W116 and W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 08/1975 to 08/1979
- 350 SE (116.028) from 07/1975 to 08/1979
- 350 SEL (116.029) from 08/1975 to 08/1979

For Mercedes S-Class W126 :
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1979 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991

Girling mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Girling) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 1 left in stock

224,90 €

Reconditioned Bendix front left caliper for Mercedes W126 - 57mm

Ref: MB30024

Genuine reconditioned left front brake caliper for Mercedes S Class

This reconditioned Bendix left front brake caliper for Mercedes S Class W126 with 2 pistons diameter 57mm is an original reconditioned part.

This Bendix left front brake caliper for Mercedes W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning offered on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991
- 500 SE (126.036) from 09/1985 to 03/1991
- 500 SEL (126.037) from 09/1985 to 03/1991
- 560 SEL (126.039) from 09/1985 to 03/1991

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Only 1 left in stock

224,90 €

Reconditioned Bendix right front caliper for Mercedes W126 - 57mm

Ref: MB30025

Genuine reconditioned front right brake caliper for Mercedes S Class

This reconditioned Bendix right front brake caliper for Mercedes S Class W126 with 2 pistons diameter 57mm is an original reconditioned part.

This Bendix right front brake caliper for Mercedes W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991
- 500 SE (126.036) from 09/1985 to 03/1991
- 500 SEL (126.037) from 09/1985 to 03/1991
- 560 SEL (126.039) from 09/1985 to 03/1991

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

On order, from 24 days

169,90 €

Reconditioned front left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00306

On order, from 24 days

169,90 €

Reconditioned front right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/19)

Ref: ZZ00307

On order, from 24 days

111,90 €

Reconditioned Bendix right rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30027

Genuine reconditioned right rear brake caliper for Mercedes S Class

This reconditioned Bendix right rear brake caliper for Mercedes S Class W116 and W126 with 2 pistons diameter 38mm is an original reconditioned part.

This Bendix right rear brake caliper for Mercedes W116 and W126 is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes S-Class W116:
- 280 S (116.020) from 09/1972 to 07/1980
- 350 SEL (116.029) from 09/1972 to 03/1980

For Mercedes S Class W126 :
- 260 SE (126.020) from 09/1985 to 10/1991
- 280 S (126.021) from 09/1979 to 08/1985
- 280 SE (126.022) from 09/1979 to 08/1985
- 280 SEL (126.023) from 09/1979 to 08/1985
- 300 SE (126.024) from 09/1985 to 10/1991
- 300 SEL (126.025) from 09/1985 to 10/1991
- 380 SE (126.032) from 09/1979 to 08/1985
- 380 SEL (126.033) from 09/1979 to 08/1985
- 380 SEC (126.043) from 09/1981 to 08/1985
- 420 SE (126.034) from 09/1985 to 10/1991
- 420 SEL (126.035) from 09/1985 to 10/1991
- 420 SEC (126.046) from 09/1985 to 10/1991

Bendix mounting only
The list of compatible models is given for information only. Remember to check your braking system to identify the original mounting (Bendix or ATE) and compare the shape and dimensions of your calipers. Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will need 1 week to check your caliper on receipt of the consignment. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

In stock

Rubber protective cap for caliper and wheel cylinder bleed screws

0,55 €

4,6

Rubber protective cap for caliper and wheel cylinder bleed screws

Ref: VH26302

In stock

Bleed screw 6 mm short to wheel cylinder

1,90 €

3,2

Bleed screw 6 mm short to wheel cylinder

Ref: UC26300

In stock

Brake calliper bleeder screw for Porsche 911 and 912

4,90 €

5,0

Brake calliper bleeder screw for Porsche 911 and 912

Ref: UC11725

In stock

2,90 €

4,7

7 mm drain screw for brake caliper

Ref: GH26106

In stock

2,90 €

5,0

1 Bleed screw 6 mm for wheel cylinder

Ref: UC26102

Show product details

Axle

Assembly side

22 Results

sort by

Only 1 left in stock

159,90 €

Reconditioned rear left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00340

Only 2 left in stock

139,90 €

Reconditioned ATE front right caliper for Mercedes W126 - 60mm

Ref: MB30007

Only 1 left in stock

139,90 €

Reconditioned GIRLING front right brake caliper for Mercedes S Class C126

Ref: ZZ00351

This reconditioned GIRLING front right caliper for Mercedes C126 S Class is an original reconditioned part.

This right front brake caliper is an original cast aluminium part. It has been refurbished in strict compliance with the original by our partner.

Compatible models:

-380 SEC (126.043) : 10/1981 - 07/1985

-500 SEC (126.044) : 08/1980 - 08/1985

Return and refund conditions for returnable parts

Please ensure that you comply with the following conditions when returning your deposit:

- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and SDO.

- It must be drained of all brake fluid and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).

- The bolts, clips, connection screws and bleed screws must be present in the package.

- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.

Only 1 left in stock

159,90 €

Reconditioned rear right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00341

Only 1 left in stock

139,90 €

Reconditioned GIRLING front left brake caliper for Mercedes S Class C126

Ref: ZZ00350

This reconditioned GIRLING front left caliper for Mercedes S Class C126 is an original reconditioned part.

This left front brake caliper is an original cast aluminium part. It has been refurbished in strict compliance with the original by our partner.

Compatible models:

-380 SEC (126.043) : 10/1981 - 07/1985

-500 SEC (126.044) : 08/1980 - 08/1985

Return and refund conditions for returnable parts

Please ensure that you comply with the following conditions when returning your deposit:

- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and SDO.

- It must be drained of all brake fluid and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).

- The bolts, clips, connection screws and bleed screws must be present in the package.

- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.

Only 3 left in stock

124,90 €

Reconditioned ATE left rear caliper for Mercedes W114 and W115 - 38mm

Ref: MB31012

Only 4 left in stock

124,90 €

Reconditioned ATE right rear caliper for Mercedes W114 and W115 - 38mm

Ref: MB31013

Only 2 left in stock

127,90 €

Reconditioned Bendix right front caliper for Mercedes W126 - 60mm

Ref: MB30023

Only 2 left in stock

108,90 €

Reconditioned Bendix front left caliper for Mercedes W126 - 60mm

Ref: MB30022

Only 4 left in stock

120,90 €

Refurbished Bendix left rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30026

Only 4 left in stock

109,90 €

Reconditioned Girling left rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30030

Only 2 left in stock

109,90 €

Reconditioned Girling right rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30031

Only 1 left in stock

224,90 €

Reconditioned Bendix front left caliper for Mercedes W126 - 57mm

Ref: MB30024

Only 1 left in stock

224,90 €

Reconditioned Bendix right front caliper for Mercedes W126 - 57mm

Ref: MB30025

On order, from 24 days

169,90 €

Reconditioned front left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Ref: ZZ00306

On order, from 24 days

169,90 €

Reconditioned front right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/19)

Ref: ZZ00307

On order, from 24 days

111,90 €

Reconditioned Bendix right rear caliper for Mercedes S Class W116 and W126 - 38mm

Ref: MB30027

In stock

0,55 €

4,6

Rubber protective cap for caliper and wheel cylinder bleed screws

Ref: VH26302

In stock

1,90 €

3,2

Bleed screw 6 mm short to wheel cylinder

Ref: UC26300

In stock

4,90 €

5,0

Brake calliper bleeder screw for Porsche 911 and 912

Ref: UC11725

In stock

2,90 €

4,7

7 mm drain screw for brake caliper

Ref: GH26106

In stock

2,90 €

5,0

1 Bleed screw 6 mm for wheel cylinder

Ref: UC26102

Secure payment

Learn more

Shipping in 24/48 hours

Learn more

Satisfied or refunded

Learn more

Brake calipers for Mercedes W126

Reconditioned rear left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned ATE front right caliper for Mercedes W126 - 60mm

Reconditioned GIRLING front right brake caliper for Mercedes S Class C126

Reconditioned rear right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned GIRLING front left brake caliper for Mercedes S Class C126

Reconditioned ATE left rear caliper for Mercedes W114 and W115 - 38mm

Reconditioned ATE right rear caliper for Mercedes W114 and W115 - 38mm

Reconditioned Bendix right front caliper for Mercedes W126 - 60mm

Reconditioned Bendix front left caliper for Mercedes W126 - 60mm

Refurbished Bendix left rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Girling left rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Girling right rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Bendix front left caliper for Mercedes W126 - 57mm

Reconditioned Bendix right front caliper for Mercedes W126 - 57mm

Reconditioned front left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned front right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/19)

Reconditioned Bendix right rear caliper for Mercedes S Class W116 and W126 - 38mm

Rubber protective cap for caliper and wheel cylinder bleed screws

Bleed screw 6 mm short to wheel cylinder

Brake calliper bleeder screw for Porsche 911 and 912

7 mm drain screw for brake caliper

1 Bleed screw 6 mm for wheel cylinder

Reconditioned rear left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned ATE front right caliper for Mercedes W126 - 60mm

Reconditioned GIRLING front right brake caliper for Mercedes S Class C126

Reconditioned rear right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned GIRLING front left brake caliper for Mercedes S Class C126

Reconditioned ATE left rear caliper for Mercedes W114 and W115 - 38mm

Reconditioned ATE right rear caliper for Mercedes W114 and W115 - 38mm

Reconditioned Bendix right front caliper for Mercedes W126 - 60mm

Reconditioned Bendix front left caliper for Mercedes W126 - 60mm

Refurbished Bendix left rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Girling left rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Girling right rear caliper for Mercedes S Class W116 and W126 - 38mm

Reconditioned Bendix front left caliper for Mercedes W126 - 57mm

Reconditioned Bendix right front caliper for Mercedes W126 - 57mm

Reconditioned front left brake caliper for Mercedes Benz S-Class W126 (09/1979-10/1991)

Reconditioned front right brake caliper for Mercedes Benz S-Class W126 (09/1979-10/19)

Reconditioned Bendix right rear caliper for Mercedes S Class W116 and W126 - 38mm

Rubber protective cap for caliper and wheel cylinder bleed screws

Bleed screw 6 mm short to wheel cylinder

Brake calliper bleeder screw for Porsche 911 and 912

7 mm drain screw for brake caliper

1 Bleed screw 6 mm for wheel cylinder

Mercedes W126 engine variants

Other categories that may interest you

Universe of parts Mercedes W126