Undercarriages Mini R50 R52 R53

Adjustable sway bar front or rear for MINI II R50, R53 Sedan and R52 Convertible from 03/2002:

R50 Sedan:
- Cooper 1.6L 116hp from 03/2002 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 03/2002 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Convertible:
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 03/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Also suitable for MINI III R56, R56LCI Sedan, R57, R57LCI Convertible, R58 Coupe and R59 Roadster from 10/2005 to 06/2015.

These short adjustable tie rods are essential when you lower your vehicle. With the variousrods provided, they allow for adjustment in length to perfectly match the fixations between the shock absorber and the front or rear sway bar of your MINI.

Adjustment ranges:
- 15cm - 20cm
- 22cm - 27cm
- 27cm - 32cm

Fixing hardware is included (10mm fixing bolt).

This product is sold as a pair for 1 axle ( right side left side).

OMP front upper suspension strut brace for:
- Mini One 1.6, Cooper and Cooper S from 09/2001 to 10/2006

Connecting rod for frontstabilizer bar left-hand driver's side or right-hand passenger's side for MINI II R50 and R53 Sedan up to 02/2002 :

R50 Saloon :
- Cooper 1.6L 116hp from 09/2000 to 02/2002 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 02/2002 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 02/2002 (engine code W11B16)

Dimensions :
- Length: 350 mm
- Thread: M10 x 1.5

Supplied with nuts.

This product is sold individually.

Connecting rod for frontstabilizer bar left driver's side or right passenger's side for MINI II R50, R53 Sedan and R52 Convertible from 03/2002 :

R50 Sedan :
- Cooper 1.6L 116hp from 03/2002 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 03/2002 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 03/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Dimensions :
- Length: 300 mm
- Thread: M10 x 1.5

Supplied with nuts.

This product is sold individually.

Left front suspension arm for MINI II R50, R53 Sedan and R52 Convertible :

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Suspension brackets and ball joints are not supplied.

This suspension wishbone is located on the front left-hand driver's side.

Left-hand rear wheel hub on driver's side or right-hand rear wheel hub on passenger's side with integrated wheel bearing for MINI II R50, R53 Sedan and R52 Convertible from 08/2006 :

R50 Saloon :
- Cooper 1.6L 116hp from 08/2006 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 08/2006 to 11/2006 (engine code W10B16)

R52 Cabriolet :
- Cooper 1.6L 116hp from 08/2006 to 07/2008 (engine code W10B16)
- Cooper S 1.6L 170hp from 08/2006 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 08/2006 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 08/2006 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S 1.6L 170hp from 08/2006 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 08/2006 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 08/2006 to 09/2006 (engine code W11B16)

Dimensions :
- Outside diameter: 137 mm
- Inside diameter: 27.5 mm
- Bore for brake disc: 64.2 mm
- Rim bore: 56.1 mm
- Centre distance: 4 x 100 mm
- Thread: M14 x 1.25

This product is sold individually.

Front wheel hub , left, driver's side or right, passenger's side, with integrated wheel bearing for MINI II R50, R53 Sedan and R52 Convertible up to 07/2006 :

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 07/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 07/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2006 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2006 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 07/2006 (engine code W11B16)

Dimensions :
- Outside diameter: 137 mm
- Inside diameter: 27.5 mm
- Bore for brake disc: 64.2 mm
- Rim bore: 56.1 mm
- Centre distance: 4 x 100 mm
- Thread: M12 x 1.5

This product is sold individually.

Front wheel hub , left on driver's side or right on passenger's side, with integrated wheel bearing for MINI II R50, R53 Sedan and R52 Convertible from 08/2006 :

R50 Saloon :
- Cooper 1.6L 116hp from 08/2006 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 08/2006 to 11/2006 (engine code W10B16)

R52 Cabriolet :
- Cooper 1.6L 116hp from 08/2006 to 07/2008 (engine code W10B16)
- Cooper S 1.6L 170hp from 08/2006 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 08/2006 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 08/2006 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S 1.6L 170hp from 08/2006 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 08/2006 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 08/2006 to 09/2006 (engine code W11B16)

Dimensions :
- Outside diameter: 137 mm
- Inside diameter: 27.5 mm
- Bore for brake disc: 64.2 mm
- Rim bore: 56.1 mm
- Centre distance: 4 x 100 mm
- Thread: M14 x 1.25

This product is sold individually.

FEBI right suspension knuckle on inside suspension arm for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Supplied with tightening nut.

Dimensions :
- M14 x 1.5 external thread

This ball-and-socket joint is located on the right front passenger side.

Suspension ball jointleft or right on outer pivot bearing for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Dimensions :
- M12 x 1.5 external thread

This ball joint is located on the right front passenger side or left front driver side.

This product is sold individually.

FEBI left suspension ball joint on inside suspension arm for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Supplied with tightening nut.

Dimensions :
- M14 x 1.5 external thread

This ball-and-socket joint is located on the front left of the driver's side.

22.5mm front stabilizer bar silencer for MINI II R50 Sedan and R52 Convertible :

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16) -> standard suspension
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16) -> sport suspension plus
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV) -> sport suspension plus
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV) -> sport suspension plus

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16) -> standard suspension
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16) -> standard suspension

Quantity required per vehicle: 2

This product is sold individually.

Polyurethane silentblocks for driver's left and passenger's right front suspension arm mounts from SUPERPRO for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan:
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Diameter: 66 mm

The polyurethane material offers greater rigidity and greatly improves front-end responsiveness compared to the original rubber silentblocks. The result is improved roadholding for a sportier, safer ride.

This product is sold as a pair. The kit is designed for the 2 suspension wishbones.

Silentblocs excentriques en polyuréthane des 2 bras de suspension arrière inférieur et supérieur, à gauche côté conducteur ou à droite côté passager pour MINI II R50, R53 Berline et R52 Cabriolet :

R50 Berline :
- Cooper 1.6L 116cv du 09/2000 au 11/2006 (code moteur W10B16)
- One 1.6L 90cv du 09/2000 au 11/2006 (code moteur W10B16)
- One D 1.4L 75cv du 06/2002 au 06/2004 (code moteur W171ND-TV)
- One D 1.4L 88cv du 07/2004 au 07/2006 (code moteur W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116cv du 11/2002 au 07/2008 (code moteur W10B16)
- Cooper S manu. 1.6L 163cv du 11/2002 au 06/2004 (code moteur W11B16)
- Cooper S 1.6L 170cv du 07/2004 au 07/2008 (code moteur W11B16)
- Cooper S JCW 1.6L 200cv du 11/2002 au 06/2004 (code moteur W11B16)
- Cooper S JCW 1.6L 210cv du 07/2004 au 07/2008 (code moteur W11B16)
- One 1.6L 90cv du 01/2003 au 07/2008 (code moteur W10B16)

R53 Berline :
- Cooper S manu. 1.6L 163cv du 10/2000 au 06/2004 (code moteur W11B16)
- Cooper S 1.6L 170cv du 07/2004 au 11/2006 (code moteur W11B16)
- Cooper S JCW 1.6L 200cv du 11/2002 au 06/2004 (code moteur W11B16)
- Cooper S JCW 1.6L 210cv du 07/2004 au 11/2006 (code moteur W11B16)
- Cooper S JCW GP 1.6L 218cv du 03/2006 au 09/2006 (code moteur W11B16)

Ce kit comprend :
- 2 silentblocs pour le bras de suspension supérieur (droit ou gauche)
- 2 silentblocs pour le bras de suspension inférieur (droit ou gauche)

Quantité nécessaire par véhicule : 2 kits

1 kit convient pour le remplacement des silentblocs non excentriques d'origine en caoutchouc pour un côté uniquement. Il vous faudra donc obligatoirement commander 2 kits car chaque bras de suspension doit posséder des silentblocs excentriques afin de permettre leur ajustage.

Grâce à ces silentblocs excentriques, la géométrie d'origine du train arrière peut être ajustée. Vous pourrez modifier le carrossage et le pincement des roues arrières afin de rendre le comportement dynamique du châssis plus incisif et améliorer la tenue de route en virage.

Le matériaux polyuréthane offre plus de rigidité et une meilleure durabilité par rapport aux silentblocs en caoutchouc d'origine. Le comportement routier s'en trouve bonifié pour une conduite plus sportive et plus sûre.

SUPERPRO polyurethane silentblocks for left and right rear longitudinal swingarm mounts for MINI II R50, R53 Sedan from 05/2003 and R52 Convertible all years:

R50 Sedan :
- Cooper 1.6L 116hp from 05/2003 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 05/2003 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 05/2003 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 05/2003 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)

ATTENTION: Not suitable for JCW!

This kit is suitable for replacing the original non-eccentric rubber silentblock on the left and right rear suspension swingarm mounts (1 silentblock per mount).

The polyurethane material offers greater rigidity and durability than original rubber bushes. The result is improved roadholding for a sportier, safer ride.

This product is sold in pairs.

OMP front lower upper suspension strut brace for :
- Mini One 1.6, Cooper and Cooper S from 09/2001 to 10/2006

OMP front upper suspension strut brace for Mini for:
Mini One and Mini Cooper from 2007

Biellette of stabilizer bar rear left side driver or right side passenger for MINI II R50, R53 Sedanand R52 Convertible:

R50 Sedan:
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Convertible :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manual. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Dimensions:
- Length: 233 mm
- Threading: M10 x 1.5

Delivered with nuts.

This product is sold individually.

Right front suspension arm for MINI II R50, R53 Sedan and R52 Convertible:

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Suspension brackets and ball joints are not supplied.

This suspension wishbone is located on the front right-hand passenger side.

Left-hand rear wheel hub on driver's side or right-hand rear wheel hub on passenger's side with integrated wheel bearing for MINI II R50, R53 Sedan and R52 Convertible up to 07/2006 :

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 07/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 07/2006 (engine code W10B16)
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV)
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV)

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2006 (engine code W10B16)
- Cooper S manu. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2006 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 07/2006 (engine code W11B16)

Dimensions :
- Outside diameter: 137 mm
- Inside diameter: 27.5 mm
- Bore for brake disc: 64.2 mm
- Rim bore: 56.1 mm
- Centre distance: 4 x 100 mm
- Thread: M12 x 1.5

This product is sold individually.