Replacement exhaust for Volkswagen Beetle

Left + right painted steel "J" tubes to replace heater boxes.

For VW Buggy, Cox, Combi Split and Bay Window all models since 01/1963.

Engines: 1200 (D), 1300 (F, AB, AR), 1500 (H), 1600 (B, AD, AS)

Can be supplied with or without gasket, depending on supplier.

Order additionally VC22109

Left-right J-tubes in stainless steel
Original diameter version: 35 mm
Replace heater boxes.

For Buggy Supplied with gaskets and nuts.

Left-right J-tubes in stainless steel
Large-diameter version: 38 mm
Replace heater boxes.

For Buggy Supplied with gaskets and nuts.

Left-right J-tubes in stainless steel
Large-diameter version: 42 mm
Replace heater boxes.

For Buggy Supplied with gaskets and nuts.

Right "J"-shaped tube in painted steel
to replaceheater boxes.

For Buggy & Beetle, all models from 01/1963->
Split Screen & Bay Window Camper
Engines: 1200 (D), 1300 (F, AB, AR), 1500(H), 1600 (B, AD, AS)

These J-tubes in stainless steel with a diameter of 32 mm are designed for engines known as "cast foot" of 25 and 30 bhp fitted to the Volkswagen Beetle and Volkswagen Combi Split produced between 1947 and 1960. They fit according to the original standard in the exhaust line and replace the original heating boxes that are worn or no longer in use. Supplied as a pair, they are suitable for restorations keen to preserve original dimensions while improving durability thanks to the stainless steel material. They provide a reliable solution for overhauling the exhaust system of a classic vehicle in accordance with best practice.

Left "J"-shaped tube in painted steel
to replace heater boxes.

For Buggy & Beetle, all models from 01/1963->
Split Screen & Bay Window Camper
Engines: 1200 (D), 1300 (F, AB, AR), 1500 (H), 1600 (B, AD, AS)

Replaces the left-hand side heater unit
For 25 and 30 bhp engines from 47->60

This clamp is intended to secure and seal CSP J-Tubes with the exhaust manifold.
For J-tube in 38mm
Sold individually, need 2

For VW Beetle, Buggy, Split Combi, Bay Windows, Type 3,...

Replaces the right-hand heater unit
For 25 and 30 bhp engines from 47->60

Left-right J-tubes in stainless steel
Large-diameter version: 48 mm
Replace heater boxes.

For Buggy Supplied with gaskets and nuts.

J-tubes left right in stainless steel
Large-diameter version: 45 mm
Replace heater boxes.

For Buggy Supplied with gaskets and nuts.

Sport exhaust manifolds
Replace heating boxes
on Type 4 engine 1.7 / 1.8 / 2.0 L
08/1978->12/1979

This pair of J-tubes in stainless steel with 32 mm diameter is designed for engines known as « cast-iron base » of 25 and 30 cv equipping the Volkswagen Beetle and Volkswagen Combi Split produced from 1947 to 1960. Connection to the silencer is carried out by specific Vintage Speed flanges, ensuring a connection adapted to these period engines. These tubes replace the original heating boxes, often corroded or defective on vehicles of this age, and are perfectly suited to a careful restoration project. Stainless steel quality guarantees durability suited to the requirements of a classic vehicle maintained with care.

The stainless steel Sport exhaust manifolds are performance parts designed to replace the original exhaust manifolds. These manifolds allow for improved engine performance, particularly in terms of exhaust gas flow and increased power, and also replace the heating boxes. Diameter: 42 mm. Flanges: Oval. Type 4 Engines: 1.7 / 1.8 / 2.0 L. Delivered with gaskets and hardware. German quality CSP.

Sport stainless steel exhaust collector pair CSP
Replace the heating boxes.
Diameter: 42 mm
Flanges: Rectangular
Type 4 engines: 2.0 L

Delivered with gaskets and hardware.
German quality CSP.

Sport stainless steel exhaust collector pair CSP
Replace the heating boxes.
Diameter: 45 mm
Flanges: Rectangular
Type 4 engines: 2.0 L

Delivered with gaskets and hardware.
German quality CSP.

Sport stainless steel exhaust collector pair CSP
Replace the heating boxes.
Diameter: 45 mm
Flanges: Oval.
Delivered with gaskets and hardware.
German quality CSP.

Left-right J-tubes with ceramic treatment
to replace heater boxes.

For Buggy

Sport exhaust manifolds
Replace heating boxes
on Type 4 engine 2.0L

For VW T2 Combi Bay Window, 08/1978->12/1979

- 200 CPSI filtration
- A single input and output
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Total length: 310
Diameter: 120
Internal diameter of the socket: 63.5 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- A single input and output
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Total length: 310
Diameter: 120
Internal diameter of the socket: 50.8 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4 l

- 200 CPSI filtration
- 2 parallel inlets, one single outlet
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Length: 410
Width: 180
Thickness: 100
Internal diameter of the socket: 55 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- 2 parallel inlets, one single outlet
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Length: 410
Width: 180
Thickness: 100
Internal diameter of the socket: 50.8 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- 2 parallel inlets, 2 parallel outlets
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Length: 370
Width: 180
Thickness: 100
Internal diameter of the socket: 57 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- A single input and output
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Total length: 310
Diameter: 120
Internal diameter of the socket: 57 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- 2 parallel inlets, 2 parallel outlets
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Length: 370
Width: 180
Thickness: 100
Internal diameter of the socket: 50.8 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4L

- 200 CPSI filtration
- A single input and output
- Protective heat shield welded to the catalytic converter

Dimensions in mm:
Total length: 354
Diameter: 100
Internal diameter of the socket: 50.8 Heat-resistant up to 1,100°C
Adapted for petrol vehicles with a cylinder capacity of up to 4 l