Exhaust system joints for Volkswagen Golf 1

For Golf 1:
- 1.5, 1.6 and 1.8 gasoline
- 1.5 and 1.6 Diesel and Turbo Diesel Sold individually, it takes 4

Is mounted between the collector and the tube 2 in 1 (ref GC20100)

For Golf 1:
- 1.5 Diesel 50hp (CK) from 08/79->
- 1.5 65hp (GH)from 08/80->
- 1.5 70hp (JB) from 08/80->
- 1.6 Diesel 54hp (CR, JK) from 08/80->
- 1.6 Turbo Diesel 70hp (CY) from 08/80->
-1.6 75hp (EW) from 08/80->

For Golf1 Cabriolet & Caddy from84 ->93

For Golf 2 from84 ->92

For Passat 3 (35i):
- 1.6 TD Intercooler 80hp (RA, SB)
- 1.9 Diesel 64hp (1Y) Internal diameter 72mm for manifold with round flange

For Golf 1:
- 1.6 turbo Diesel 70hp (CY)

For Golf 2 and Jetta:
- 1.6 turbo Diesel70hp (JR)
- 1.6 turbo Diesel Intercooler (RA)

For Golf 3 and Vento:
- 1.9 turbo Diesel 75hp (AAZ)
up to chassis ->1H-R-160 000 and ->1H-RB040 000

For Passat 3 until ->10/93:
- 1.6 turbo Diesel Intercooler 80hp (RA, SB)
- 1.9 Diesel 64hp (1Y)
- 1.9 turbo Diesel 75hp (AAZ) Seal between the turbo and the turbo outlet pipe/exhaust manifold
Also between the exhaust manifold and the outlet pipe depending on engine type

Sold individually, it is necessary 2 for one collector.

For VW Golf 1, Jetta 1 & Scirocco, 74 ->93
- 1.1 (FA, FJ, GG)
- 1.3 (GF, HK)
- 1.6 (FR) Sold individually, 2 required for a collector.

For Golf 1 cabriolet:
- 1.8 98hp (2H)

For Golf 3:
- 1.8 75hp (AAM)
- 1.9 Diesel 64hp (1Y, AEY)

For Golf 4:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.6 105hp (ATN, AUS, AZD, BCB)
- 1.9 SDi 68hp (AGP, AQM)

For New Beetle:
- 1.4 75hp (BCA up to chassis ->1Y-5-322020)

For Polo 4 (6N1):
- 1.6 120hp (AJV)
- 1.7 Diesel 57hp (AHG)
- 1.7 Diesel 60hp (AKU)
- 1.9 Diesel 64hp (AEF, AGD)

For Polo 9N:
- 1.4 75hp (AUA, BBY, BKY)
- 1.4 100hp (BBZ)
- 1.6 75hp (BKY)
- 1.9 SDi 64hp (ASY)

For Golf 1 :
-
For Golf 3 up to chassis :
-

Gasket between the exhaust manifold on the cylinder head and the exhaust downpipe. For versions with a rectangular flange.

For Golf 1:
- 1.5 50hp (CK) up to ->07/79
- 1.5 65hp (GH) from 79 ->80
- 1.5 70hp (FH, FK) up to ->07/79
- 1.5 70hp (JB) from 79 ->80
- 1.5 85hp (FD) up to ->07/79
- 1.6 65hp (FV) from 79 ->80
- 1.6 75hp (FP) up to ->07/79
- 1.7 78hp (EN)

For Passat type 32/33:
- 1.5 85hp (ZC)
- 1.6 75hp (YN)
- 1.6 85hp (YP)
- 1.6 110hp (YS)

For Passat type 32B:
- 1.3 60hp (EP)
- 1.6 65hp (WP)
- 1.6 75hp (DT, JU, WV, WY, YN)
- 1.6 85hp (YP)
- 1.8 87hp (RM)
- 1.8 90hp (DS, JV)

Diameter: 50 mm
For IRESA sport manifold

This seal is a new spare part designed to ensure the watertightness of the Volkswagen Passat B2 and the Volkswagen Golf 1. As part of the restoration or maintenance of a classic vehicle, replacing a worn, damaged or missing seal is an essential step in preserving the proper functioning of the assembly to which it belongs. Fitting a new part that complies with original specifications makes it possible to restore a satisfactory level of watertightness and to prevent any further deterioration. This type of component, discreet but essential, helps to keep the vehicle in a condition faithful to its original design.

The exhaust pipe gasket 841 253 115 B is an original VW part designed to ensure a perfect seal and reduce leaks. Ideal for maintaining the performance of your classic Volkswagen.

Replacement seal for 60 / 63.5 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 61
- Thickness: 14

Specific joint for the following connector flanges:
- 60 mm UC24820
- 63.5mm UC24822
- 65 mm UC24824
- 70 mm UC24826

Resistant to high temperatures.

Specific joint for the following connector flanges:
- 45 mm UC24814
- 50 mm UC24816
- 55 mm UC24818

Resistant to high temperatures.

Specific joint for the following connector flanges:
- 50 mm UC24802
- 55 mm UC24804

Resistant to high temperatures.

Replacement seal for 45 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 46
- Thickness: 14

Replacement seal for 55 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 56
- Thickness: 14

Specific joint for the following connector flanges:
- 60 mm UC24802
- 63.5 mm UC24808
- 65 mm UC24810
- 70 mm UC24812

Resistant to high temperatures.

Specific joint for the 45 mm UC24800 connector flange

Resistant to high temperatures.

Replacement seal for 50 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 51
- Thickness: 14

Replacement seal for 65 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 66.5
- Thickness: 14

Replacement seal for 70 / 76 mm compensator connector
Dimensions in mm:
- Large side internal diameter: 71.5
- Thickness: 14

This seal is a replacement part intended for the Volkswagen Touareg, allowing you to restore the watertightness of an assembly whose original seal is worn or failed. As part of the restoration or maintenance of a classic vehicle, replacing a seal in poor condition is a fundamental operation to prevent any leakage and preserve the integrity of the mechanical assembly concerned. Opting for a new part guarantees a return to original conditions and avoids any further degradation linked to insufficient watertightness. This seal thus represents a serious solution for keeping the Volkswagen Touareg in a condition compliant with its manufacturer's specifications.

ring