Disc brake pushing tool

This multi-brand 18 piece piston wind back kit is ideal to easily remove brake pads by winding back the piston, with left or right thread.

The adapters can be used with pneumatic piston wind back. They can be used for both front and rear brakes.

This TOOLATELIER piston plunger is a reversible tool suitable for several types ofbrake caliper to facilitate pad fitting.


For calipers equipped with automatic right-hand adjustment, as on Golf rear calipers.
This reversible piston plunger allows the piston to be screwed back into its housing.
Professional quality, reversible sleeve.

Adapter sizes :

First side:

- lug: 6 mm
- internal socket: 17 mm
- external socket: 29 mm

Second side :

- lug: 6 mm
- internal connector: 27 mm
- external socket: 39 mm

For Alfa Romeo, Audi, Citroën,Fiat, Ford, Honda, Jaguar, Mazda, Mitsubishi,Nissan, Opel, Peugeot, Renault, Rover, Fiat, Seat, Subaru, Toyota, Volkswagen (except Tiguan), Volvo (except V50).

- universal tool for brake pistons without spinning device

This TOOLATELIER tool kit enables brake caliper pistons to be pushed back when replacing brake discs and/or pads.
Compatible vehicles include: General Motors, Citroën XM & Xantia, Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, Mazda, Saab 9000, Subaru, Renault (except Safrane), Opel & VW.
It's THE essential kit for easy work on your disc brakes!

This kit will enable you to push back the brake pistons on Iveco Stralis and Eurocargo trucks.

This pneumatic brake plunger is made up of different adapters that can be used on most vehicles.
Suitable for both left-hand and right-hand threads.

Air hose connection: 1/4".

Specific tool for the rear brakes of the Transporter T5.

This FACOM brake caliper plunger simultaneously pushes back double or quadruple pistons in a perfectly parallel manner.
It can push 215 kg (2200 Nm) with one hand.

The handle makes it easy to push or release pressure.

For quick and easy removal of motorcycle brake pistons.

Piston diameter: 17 to 40 mm

This FACOM pneumatic brake plunger is used in the automotive industry. It is suitable for most European vehicles.

It comes in a plastic case with vehicle illustrations.

The kit comprises a pneumatic tool and 6 adaptable cups.

BMW F series
Applications: BMW rear brakes E89, Z4 2008 onwards, F10-F11 5 series 2010 onwards, F12, F13 6 series, F18 5 series with long wheel base, F25 X3 2010 onwards.
3/8"D
Specification : OD - 44mm, Pin D- 6mm, Pin length- 3mm, Pin PCD - 35.5mm

3 pin brake piston wind back tool
For use on VAG models, Renault Megane and Scenic and Volvo fitted with Electronic Park Brakes
To be used in conjunction with electronic park brake tools but not instead of them
3/8"D or two pin drive option
3/8"D or two pin drive option
Out side diameter 39mm, Pin PCD 32mm, Pin Diameter 3mm

Special reaction plate (OEM: 34 6 307).
3/8"D
Complete with special adaptor 21 (also available separately Part No 3941) (OEM: 34 6 300/301).
Designed specifically to rewind the rear brake caliper on pre 2007 models (R50, R52 & R53)
Designed specifically to rewind the rear brake caliper on pre 2007 models (R50, R52 & R53)
An essential tool for routine maintenance.

Use with any 3/8"D rewind tool
20mm centres
Robust quality tool
Full range available
Full range available
Time Saver

3/8"D
For use with Renault Clio
4mm pins/31mm centres
Can be used with pneumatic brake caliper rewind tool

Adaptor No 17
Introduced to cover Peugeot 206 CC/Hdi/Gti vehicle
16mm shaft for spanner
6mm pins/23mm centres
6mm pins/23mm centres
Robust tool