Petrol injector cleaners

L'hyper-lubrifiant MECACYL HJE 200ml soupapes et injecteurs essence est un traitement préventif et curatif idéal pour la protection et l'amélioration du système d'injection de n'importe quel type de moteur essence, superéthanol, GPL et hybride.
Sa formule exclusive présente un intérêt particulier pour les anciens moteurs qui roulent à l'essence sans plomb mais aussi pour les véhicules au GPL ou à l'E85. En effet, MECACYL HJE protège les soupapes et leur siège du dessèchement et des montées en température que peuvent entraîner ces types de carburants.

Dosage véhicules essence ou superéthanol E85 :
- 1/3 de flacon de 200ml soit 70ml pour 40 à 60L de carburant à répéter tous les 5000km (soit un flacon utilisé pour 15000km parcourus).

Dosage véhicules de collection lors du passage de l'essence plombée au sans plomb ou véhicules GPL :
- Mettre 10 à 20ml soit 1 à 2 bouchons maximum dans 20L de carburant.

Avantages :
- Nettoie les injecteurs, les chambres de combustion et limite leur encrassement.
- Lubrifie les soupapes tout en protégeant leur siège (E85, GPL).
- Protection complète du circuit de carburant contre l'eau et les contaminants.
- Réduit les fumées à l'échappement.
- Améliore le fonctionnement et la souplesse du moteur.
- Réduit les claquements pour un moteur plus silencieux (K-Jetronic, pompes etc...).
- Facilite le passage au contrôle technique.
- Compatible avec tous les carburants SP95, SP95-E10, SP98, superéthanol E85 et GPL.

Conseils d'utilisation véhicules essence ou superéthanol E85 :
- Verser dans le réservoir de carburant via son orifice de remplissage avant de faire le plein

Conseils d'utilisation véhicules de collection lors du passage de l'essence plombée au sans plomb ou véhicules GPL :
- Mettre 10 à 20ml soit 1 à 2 bouchons maximum dans 20 litres de carburant
- Bien mélanger
- Verser dans le réservoir de carburant via son orifice de remplissage
- Rouler jusqu'à épuisement du carburant traité
- Effectuer ensuite 3 à 4 pleins de carburant sans ajout d'hyper-lubrifiant
- Recommencer la procédure

Merci de respecter les précautions d'usage.

BARDAHL injector cleaner (500ml) cleans and protects the entireinjection system of all engines running on leaded or unleadedpetrol, with or without biofuel content (compatible with SP95-E5, SP95-E10 and SP98) or LPG.
It prevents seizure and restores injector flow, while protecting injection pumps. Thanks to its lubricating properties, it reduces cold noise and engine wear. It reducesexhaust emissions, making it easier to pass roadworthiness tests.

WARNING: Not suitable for Superethanol E85 (immiscible)!

Advantages :
- Easy to use
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions

Recommendations for use :
-Wait for reserve light to come on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 15 liters of petrol
- Drive normally until the treated fuel runs out, in one or more trips.
- Refuel as normal

Recommendation:
Once a year or every 5000km for city driving or short trips, or every 10000km for freeway driving.

Information: For heavily clogged engines, old engines or engines that have not passed their MOT, we recommend the use of BARDHAL injector cleaner in 1-liter format (reference UD23030).

Please observe all safety precautions.

BARDAHL Injector Cleaner (1 Litre) cleans and protects the entireinjection system of all engines running on leaded or unleadedpetrol, with or without biofuel content (compatible with SP95-E5, SP95-E10 and SP98) or LPG.
It prevents seizure and restores injector flow, while protecting injection pumps. Thanks to its lubricating properties, it reduces cold noise and engine wear. It reducesexhaust emissions, making it easier to pass roadworthiness tests.

WARNING: Not suitable for Superethanol E85 (immiscible)!

Advantages :
- 1 Litre format for thorough treatment
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions
- Makes it easier to pass roadworthiness tests (pollution measurement).

Recommendations for use :
-Wait until the reserve light is on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 30 liters of gasoline
- Drive normally until the treated fuel is used up, in one or more trips.
- Refuel as normal

Recommendation:
Preferably used before the technical inspection or as a curative treatment on a heavily clogged or old engine.

Information: For engines with low mileage, recent models or preventive treatment, we recommend the use of BARDHAL injector cleaner in 500ml format (reference UD20202).

Please observe the precautions for use.

Eliminates deposits in fuel systems, injectors or carburettors, intake valves and combustion chamber.
Restores original power and performance.
Improves driving experience
Reduces fuel consumption and pollutant emissions.
Makes cold starts easier and protects against corrosion.

MOTUL All-in-One Multi-Action Petrol is a complete curative cleaner for all types of engine, whether fuel-injected or carburettor-driven, turbocharged or naturally-aspirated, with or without catalytic converter or particulate filter (GPF), using leaded or unleaded petrol, with or without biofuel percentage (compatible with SP95-E5, SP95-E10 and SP98) or LPG.
Thanks to its multi-action curative properties, it thoroughly cleans deposits and fouling in injectors and fuelsupply systems inherent to engine operation, thus limiting :

- injector and fuel system fouling
- Condensation in the entire fuel system
- gumming and varnishing of injectors and carburettors
- Fouling of combustion chambers and intake valves

It also protects the fuel system against corrosion, making it ideal for fuels containingethanol (E5 and E10 only).
Its formulation ensures perfect lubrication during the cleaning phase and prevents the deposit of detached micro-particles. By eliminating deposits and clogging on valves, injectors and chambers, it ensures improved combustion, restoring engine performance, reducing fuel consumption and emissions of noxious gases and particles. This additive is therefore especially recommended to prepare your car for the technical inspection ( anti-pollution control).

WARNING: Not suitable for Superethanol E85!

Advantages :
- Cleans injectors (for better fuel atomization) or carburetor
- Prevents deposits from forming on intake valves and in the combustion chamber
- Disperses condensation water to prevent oxidation and corrosion of the injection system
- Restores original engine power and performance
- Reduces fuel consumption and pollutant emissions
- Facilitates cold starts and improves driving pleasure
- Extends the life of the injection system and catalytic converter

Dosage : 1 bottle of 1L treats up to 80 Litres of petrol (1 bottle for 1 full tank).

Directions for use :
- Pour the entire 1L can into the fuel tank via the filler neck.
- Drive normally until the treated fuel has been used up in one or more trips (the fuel system will then be completely cleaned, from the tank to the combustion chamber).
- For engines with high mileage or heavy soiling, use 2 successive treatments for optimum results.

Please observe all safety precautions.

BARDAHL Superethanol Injector Cleaner (500ml) cleans and protects the entireinjection system of all engines running on superethanol E85, whether originally equipped (compatible with E85 hybrid vehicles) or after installation of an approved conversion box(flexfuel).
Its formula, 100% compatible and miscible with E85, cleans the fuel system, prevents clogging and preserves engine life.
Thanks to its lubricating properties, it restores injector flow, preventing seizure of injectors and injection pumps. Optimum, even atomization of the air/fuel mixture improvesengine efficiency.
This additive can be used both as a curative treatment as soon as the first malfunctions appear, and as a preventive measure to maintain the vehicle and guard against potential problems.

Advantages :
- Easy to use
- Protects and lubricates the injection system (counteracts the detergent power of ethanol)
- Disperses water (prevents corrosion of mechanical parts)
- Cleans injection system, restores flow and prevents seizure (injectors and injection pump)
- Improves cold-starting by promoting combustion and ignition
- Prevents clogging and preserves engine life
- Improves engine efficiency thanks to optimal atomization of the air/fuel mixture ( stoichiometric ratio respected)

Dosage: 1 x 500ml bottle treats up to 40 liters of superethanol E85 (1 bottle for 1 full tank).

Directions for use :
-Wait until the reserve light is on
- Pour the entire bottle into the tank via the filler opening
- Add 35 to 40 liters of superethanol E85
- Drive normally until the treated fuel is used up in one or more trips.
- Refuel as normal

Recommendation:
- 2 times a year or every 5000km for city driving or short trips
- 2 times a year or every 10,000km for freeway use.

Information: BARDHAL Superethanol injector cleaner is recommended after each installation of an E85 ethanol conversion box .

Please observe the safety precautions.

Increases the power of your engine and reduce fuel consumption.
These treatments synthetic multifunctional:
- Improves combustion
- Reduces fumes,
- Stabilize the idle
- Reduces fuel consumption,
- Cleans and lubricates injectors, valves and carburetor,
- Protect from corrosion,
- Neutralize the condensate and prevent any deposit in your tank.

BARDAHL Petrol Treatment 500ml
When to use itMaintenance of your fuel systemFuel consumptionRattling, auto-ignitionDamage to valves and seatsWater in fuel
Properties- Protects and keeps clean the fuel system (carburetion or injection).- Lubricates the upper part of the cylinders.- Improves engine performance, power and responsiveness.- Reduces fuel consumption.- Reduces smoke.- Compatible with all gasoline engines.
Directions for useAdd the product to 20 liters of fuel, drive and refuel.Every 2,500 km

MECARUN C99 Essence 250ml is a high-performance fuel treatment additive for all 2 and 4-stroke petrol engines, modern or old.
Its main function is to reduce fuel consumption. C99 Essence allows you to drive up to 100 kilometers further on each fill-up, giving you the advantage of fuel economy and lower Co² emissions.
This result is achieved thanks to its high cleaning power, which acts effectively on deposits of gum, carbon, scale and varnish in injectors and carburetors. A clean engine consumes less fuel.
Its anti-friction and anti-adhesion properties also protect injection pumps, injectors, carburetors, valves and piston rings, while making the engine quieter.
Its performance makes up for the drop in octane rating and fuel efficiency, even after several months. This makes it ideal for long-term storage.

Advantages :
- Eliminates gum and varnish deposits in injectors and carburetors (anti-fouling).
- Fractionates carbon, scale and oxidized oil.
- Reduces fuel consumption (up to 10%).
- Reduces pollution (CO2 emissions).
- Reduces exhaust noise and vibrations.
- Reduces the risk of seizure of pumps and injectors.
- Stabilizes gasoline storage for several months.

Dosage for road and mixed traffic: 10ml per 40 liters of petrol (competition and sport use: double or triple the dosage).
Dosage for urban traffic and sport driving: 20ml per 40 liters of petrol.

Directions for use:
- 1 250ml bottle treats up to 20 full 50-liter tanks of SP95-E10, SP95, SP98 gasoline (i.e. 1000 liters of fuel).
- Easy to use with built-in dispenser.

Save fuel and maintenance costs with MECARUN!

Please observe safety precautions.

MECARUN C99 Ethanol 250ml is a high-performance fuel treatment additive for all modern and older fuel-injected engines running on E85 bioethanol (original equipment or fitted with an Eflexfuel box).
Its main function is to homogenize the gasoline/ethanol mixture to obtain better ignition and near-perfect combustion to increase efficiency while effectively reducing fuel consumption. C99 Ethanol allows you to drive up to 100 kilometers further on each fill-up, giving you fuel savings and lower Co² emissions.
It lowers ethanol's detergent power to preserve mechanical components and rubber hoses.
Its anti-friction and anti-adhesive properties will also act to protect injection pumps, injectors, valves and rings while making the engine quieter.

Advantages :
- Promotes combustion and ignition.
- Increases engine efficiency.
- Reduces fuel consumption (up to 10%).
- Lubricates and protects engine and hoses against the detergency of ethanol and the presence of water in the engine.
- Reduces knocking and rattling.

Dosage: 10 to 20ml per 40 liters of petrol (can be used in a petrol/ethanol blend with at least 50% ethanol content in the tank).

Directions for use:
- 1 250ml bottle treats up to 20 full 50-liter tanks of E85 bioethanol (i.e. 1000 liters of fuel).
- Easy to use with its built-in dispenser.

Save fuel and maintenance costs with MECARUN!

Please observe safety precautions.

MECARUN Eco 10000 Essence 250ml is a preventive and curative fuel treatment additive compatible with all modern and old 2 and 4-stroke fuel-injected engines and carburetors running on SP95, SP95-E10, SP98 gasoline or E85 bioethanol.
Its main function is to thoroughly clean and protectfuel systems, tanks, pipes, injection pumps, injectors, carburetors, valves, lambda probes andairintake ducts.
It effectively cleans and decontaminates combustion chambers, destroying impurities, residues, scale, gum, varnish, kerosene and oxidized oil in breather trays.
It radically reduces smoke and fouling on all engine mechanical components and the exhaust line.

Advantages :
- Reduced fuel consumption.
- Reduces pollution.
- Eliminates condensation water from tanks.
- Cleans, lubricates and degreases injectors, injection pumps and carburetors.
- Cleans air intake ducts.
- Makes it easier to pass anti-pollution tests.

Curative dosage (engine cleaning and emission control): pour 1 x 250ml bottle into 25 liters of fuel and drive at over 3,000 rpm with this mixture until the reserve is reached.
Preventive dosage: 1 x 250ml bottle into 25 liters of fuel every 10,000 km (or at each service).

Directions for use:
- Easy to use, with built-in dispenser.
- Recommended at every service or before your vehicle passes its MOT (anti-pollution test).

Clean, protect your engine and save on maintenance costs with MECARUN!

Please observe all safety precautions.