Fuel treatments

More than just a simple lead substitute, it guarantees optimal protection and the perfect function of your engine by enriching the fuel with active components. Ideal for pre-1993 vehicles.
Acts as a fuel stabiliser and protects your valve seats.

Packaging: 500 ml
Enables the treatment of 500 l of fuel!

Ideal for when the vehicle is not being driven for a long period (overwintering, restoration, etc.) up to 24 months.

- Protects petrol against oxidation
- Prevents the formation of gums
- Cleans the valves
- Eliminate deposits

Suitable for all types of petrol and vehicles with a catalytic converter.
For the 2T and 4T engines.

BARDAHL EGR valve cleaner kit for diesel engines(400ml) removes and prevents gum, varnish, soot, deposits and clogging fromintake valves and the EGR valve.
It also prevents over-consumption of fuel and helps maintain the EGR valve to avoid premature and costly replacement.
Compatible with all turbocharged or non-turbocharged engines and/or equipped with catalytic converter and FAP particulate filter.

Advantages :
- Effectively removes all residues and deposits from the EGR valve
- Restores air flow to combustion chambers
- Improves engine acceleration
- Optimizes engine performance
- Prevents the formation of new deposits
- Extends the life of your EGR valve

Directions for use :
- Pour the bottle into the fuel tank via the filler neck
- Add 30 liters of fuel (do not take reserve into account)
- Hot engine, run at a constant engine speed between 2500 and 3000 rpm for 20 min.
- During the refuelling period, repeat this operation 3 to 4 times, depending on contamination (this procedure can be carried out in one or more trips).
- Once the treated fuel has been used up, refuel.

Please observe all safety precautions.

Le nettoyant filtre à particules FAP MOTUL DPF Cleaner 250ml s’utilise en traitement préventif ou curatif (voyant allumé au tableau de bord) dans tous types de moteurs diesel, à injection directe ou indirecte, turbo ou atmosphérique, avec FAP (ou DPF – Diesel Particulate Filter), et/ou SCR (Selective Catalyst Reduction AdBlue) utilisant tous types de gazoles et biodiesels (B7).
Le filtre à particules est un élément de la ligne d’échappement. Placé à son début, juste après le catalyseur (parfois combiné avec se dernier), le FAP agit comme une passoire, retenant les particules fines de suie issue de la combustion interne du carburant, dans le but de réduire la pollution de l’air.

Si votre voiture roule souvent sur petits trajets à froid, l'utilisation régulière de ce produit vous permettra de nettoyer et d'entretenir cette pièce détachée indispensable pour les voitures à moteur diesel, d'augmenter sa durée de vie, vous évitant de coûteuses réparations. En effet, il nettoie plus rapidement, plus efficacement et améliore la performance du FAP en addition des régénérations automatiques programmées par le calculateur.

Dosage : 1 flacon de 250ml traite 20 à 40L de gasoil.
#En mode curatif : 1 flacon de 250ml pour 20L de gasoil (en cas d'allumage du voyant d’alerte orange FAP au tableau de bord, qui s'éteindra après traitement, signalant le rétablissement du fonctionnement normal du filtre).
#En mode préventif : 1 flacon de 250ml pour 40L de gasoil (à effectuer tous les 5000km).

Avantages :
- Simple à utiliser grâce à la canule fournie.
- Nettoyage plus rapide et plus efficace du FAP (régénérations).
- Restauration de la puissance et des performances d’origine.
- Meilleures performances moteur et meilleur agrément de conduite.
- Amélioration des démarrages, des accélérations et des reprises.
- Réduction de la consommation de carburant et des émissions polluantes à l'échappement.

Conseils d'utilisation :
- Verser la totalité du flacon dans le réservoir de carburant via son orifice de remplissage.
- Faire le plein.
- Rouler normalement jusqu'à épuisement du carburant.
- Refaire le plein.

Information : Pour préserver les bienfaits du nettoyage du FAP et pour des performances optimales, utiliser ensuite régulièrement MOTUL DPF Cleaner (tous les 5000km).

Merci de respecter les précautions d'usage.

BY MECACYL 300ml diesel engine decontamination additive is a top-of-the-range treatment specially designed for roadworthiness testing , to avoid costly retesting due to a failed anti-pollution test.
It completely cleans and decontaminates theair circuit (turbo, EGR valve, FAP, catalytic converters) and the fuel circuit( combustionchambers, valves, pumps, injectors) by removing gum, varnish, scale and carbon deposits. It is particularly effective on the opening vanes of variable-geometry turbos.
As a result, it reduces pollutant emissions and restores optimal operation of the engine. What's more, its properties, derived from Mecacyl hyper-lubricant technology, enable it to lubricate and protect mechanical parts fromfouling.

Dosage : 1 bottle of 300ml for a 40 to 70L tank.
Frequency of use: every 30000km or before MOT.

Advantages:
- Eliminates clogging of the air circuit (turbo, EGR, FAP, catalytic converters).
- Removes soot, unburnt particles and gum from the fuel system (chambers, valves, pumps, injectors).
- Restores optimum engine performance.
- Reduces pollutant emissions.
- Makes it easier to pass anti-pollution roadworthiness tests.
- Avoids costly retesting.
- Reduces fuel consumption.
- Safe for DPFS and catalytic converters.
- Compatible with all dieselinjection systems, with or without turbo.

Directions for use :
- Pour the bottle into the fuel tank via the filler neck before filling up with diesel.
- Drive until you run out of fuel.
- Refuel as usual.
- For exclusive injector cleaning, use Mecacyl HJD2 hyper-lubricant diesel injector cleaner for roadworthiness testing (reference UD10233).

As a preventive measure before roadworthiness tests:
- Pour the bottle into the fuel tank via the filler neck before filling up with diesel.
- Run the engine at idle for 30 minutes.
- Drive for 20-30km at high engine speed (3500rpm minimum).
- Then drive normally until the fuel is completely consumed.
- Refuel before passing the technical inspection.

Please observe the usual precautions.

BY MECACYL 300ml petrol engine decontamination additive is a top-of-the-range treatment specially designed for roadworthiness tests , to avoid costly retesting due to a failed anti-pollution test.
It thoroughly cleans and decontaminates theair circuit (turbo, EGR valve, catalytic converters) and the fuel circuit( combustionchambers, valves, injectors), removing gum, varnish, scale and carbon deposits. It is particularly effective on the opening vanes of variable-geometry turbos.
As a result, it reduces pollutant emissions and restores optimal operation of the engine. What's more, its properties, derived from Mecacyl hyper-lubricant technology, enable it to lubricate and protect mechanical parts fromfouling.

Dosage : 1 bottle of 300ml for a 40 to 70L tank.
Frequency of use: every 15,000km or before MOT.

Advantages :
- Eliminates clogging of the air circuit (turbo, EGR, catalytic converters).
- Removes soot, unburnt particles and gum from the fuel system (chambers, valves, injectors).
- Restores optimum engine performance.
- Reduces pollutant emissions.
- Facilitates technical inspection (anti-pollution).
- Avoids costly retesting.
- Reduces fuel consumption.
- Safe for DPFS and catalytic converters.
- Compatible with all gasolineinjection systems, with or without turbo.
- Compatible with all SP95, SP95-E10, SP98 and superethanol E85 fuels.

Directions for use :
- Pour the bottle into the fuel tank via the filler neck before refueling.
- Drive until you run out of fuel.
- Refuel as usual.
- For exclusive cleaning and lubrication of injectors, use Mecacyl HJE hyper-lubricant for petrol valves and injectors (reference UD10228).

As a preventive measure prior to roadworthiness testing:
- Pour the bottle into the fuel tank via the filler neck before refuelling.
- Run the engine at idle for 30 minutes.
- Drive for 20-30km at high engine speed (3500rpm minimum).
- Then drive normally until the tank is completely full.
- Refuel before passing the technical inspection.

Please observe the usual precautions.

L'hyper-lubrifiant MECACYL HJD 200ml injecteurs diesel est un traitement préventif et curatif idéal pour la protection et l'amélioration du système d'injection de n'importe quel type de moteur diesel.
Sa formule exclusive assure silence de fonctionnement des injecteurs, fiabilité et une meilleure performance de l'injection.

Dosage pour les injections d'avant 2000 :
- 1 flacon de 200ml pour 60L de carburant tous les 15 à 20000km.

Dosage pour les injections les injections modernes (à partir de 2000) :
- 1/3 de flacon de 200ml soit environ 60ml à répéter tous les 5 000/6000km pour une protection en continu de l'injection.

ATTENTION : Quelques modèles de véhicules diesel à partir de 2005 sont équipés de vanne EGR spécifiques (environ 6% des diesels en circulation). Ces vannes EGR sont couplées à 1 refroidisseur ou échangeur (vanne EGR refroidie par liquide de refroidissement). Si votre véhicule est équipé de ce type de vanne EGR, vous ne pouvez pas utiliser le Mecacyl HJD. Les autres vannes EGR ne représentent pas de contre-indication !

Avantages :
- Limite l'encrassement et protège le circuit d'injection contre l'eau et les contaminants.
- Assure une meilleure combustion gage de performance.
- Réduit les fumées d'échappement.
- Facilite le passage au contrôle technique.
- Protège le gasoil du froid.

Conseils d'utilisation :
- Verser dans le réservoir de carburant via son orifice de remplissage lors d'un plein.

Merci de respecter les précautions d'usage.

BARDAHL injector cleaner for diesel engines (1 Litre) cleans injectors, combustion chamber , valves, injection pump and fuel lines (compatible with FAP particulate filters).
It prevents seizure and restores injector flow, while protecting injection pumps. Thanks to its lubricating properties, it reduces cold noise and engine wear. It limitsexhaust pollutant emissions, making it easier to pass roadworthiness tests.

Advantages :
- 1 Litre format for in-depth treatment
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions
- Makes it easier to pass roadworthiness tests (pollution measurement).

Recommendations for use :
- Wait until the reserve light is on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 35 liters of diesel
- Drive normally until the treated fuel is used up, in one or more trips.
- Refuel as normal

Recommendation:
Preferably used before the technical inspection or as a curative treatment on a heavily clogged or old engine.

Information: For engines with low mileage, recent models or for preventive treatment, we recommend the use of BARDHAL injector cleaner 500ml (reference UD23036).

Please observe the precautions for use.

BARDAHL injector cleaner for diesel engines (500ml) cleans injectors, combustion chamber , valves, injection pump and fuel lines.
It restores engine performance , facilitates cold starts, reduces noise (clattering) while eliminating particulate emissions and black exhaust fumes (compatible with FAP particulate filters).

Advantages :
- Easy to use
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions

Recommendations for use :
- Wait for reserve light to come on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 15 liters of diesel fuel
- Drive normally until you run out of treated fuel in one or more trips.
- Refuel as normal

Recommendation:
Once a year or every 5000km for city driving or short trips, or every 10000km for freeway driving.

Information: For heavily clogged engines, old engines or engines that have not passed their MOT, we recommend the use of BARDHAL injector cleaner in 1-liter format (reference UD23035).

Please observe all safety precautions.

MECACYL HJD2 200ml diesel injectors hyper-lubricant for roadworthiness testing is a spot treatment ideal for rapid cleaning of theinjection system of any type of diesel engine.
It is indicated if injectionclogging is severe and when passing anti-pollution tests, as it reduces pollutant emissions and exhaust fumes.

Advantages :
- Rapid injection cleaning (effective after just a few kilometers)
- Reduces pollutant emissions and exhaust fumes
- Makes it easier to pass roadworthiness tests (anti-pollution measure).

Directions for use :
- Pour into the tank via the filler neck when refueling
- Preferably to be used before passing the roadworthiness test

Please observe the safety precautions.

BY MECACYL 300ml diesel injector cleaning additive is a top-of-the-range curative treatment designed to quickly and thoroughly clean the diesel fuelsupply circuit of all types of dieselinjection(common rail, high pressure, direct, indirect, HDI, TDI, TDCI, CDTI) when symptoms such as :

- excessive fuel consumption
- difficult cold starts
- misfiring
- lack of power
- pollution failures at roadworthiness tests

It removes gum, varnish and residues from pumps, injectors and combustion chambers(valves, piston heads), restoring your engine's normal operation. Cold starting will be easier. Fuel consumption and pollutant emissions are reduced.
What's more, its properties, derived from Mecacyl hyper-lubricant technology, make it effective from the very first hour of operation.

Dosage : 1 bottle of 300ml for a 40 to 70L tank.

Benefits:
- Removes gum, varnish and imbricates.
- Cleans the air circuit (EGR valve).
- Increases cetane number.
- Restores engine efficiency.
- Protects diesel circuit from corrosion.
- Improves cold start.
- Reduces fuel consumption and pollutant emissions.
- Safe for DPFS and catalytic converters.

Directions for use :
- Simply pour the bottle into the fuel tank via the filler neck before filling up with diesel.
- Drive until you run out of fuel.
- Refuel as normal.

Please observe all safety precautions.

BY MECACYL 300ml smoke-stop additive is a top-of-the-rangecurative treatment designed to clean the fuel system and immediately remove smoke and black particles from theexhaust of all types of diesel engines, modern or old, with or without turbo.
It is recommended for use in preparation for roadworthiness tests, in order to pass anti-pollution tests. What's more, its properties derived from Mecacyl hyper-lubricant technology enable it to lubricate and protect the entire diesel fuelsupply circuit.

Benefits :
- Cleans, lubricates and protects the fuel system.
- Increases cetane number.
- Immediately eliminates exhaust fumes (black soot).
- Reduces pollutant emissions.
- Reduces fuel consumption.
- Makes it easier to pass anti-pollution roadworthiness tests.
- Safe for DPFS and catalytic converters.
- For occasional use (roadworthiness tests) or continuous use.

Dosage : 1 bottle of 300ml for a tank of 40 to 60 liters.

Directions for use :
- Simply pour the bottle into the fuel tank via the filler neck before filling up with diesel.
- Drive until you run out of fuel.
- Refuel as normal.
- In the case of heavily soiled engines, it's best to use the special diesel engine cleaner for roadworthiness tests (reference UD10238).

Please observe the usual precautions.

MECARUN C99 Diesel 250ml is a high-performance fuel treatment additive for all modern and older diesel engines (HDI, DCI, TDI, JTD, CDTI...).
Its main function is to reduce fuel consumption . C99 Diesel allows you to drive up to 100 kilometers further with each tankful, giving you the advantage of fuel economy and lower Co² emissions.
This result is achieved thanks to its high cleaning power, which acts effectively on the turbo, the EGR valve and the DPF. A clean engine consumes less fuel.
Its anti-friction and anti-adhesion properties also protect injection pumps, valves, injectors and piston rings.
It contains an anti-bacterial agent (Bacteriostase) that provides bacteria- and sludge-free diesel fuel to atomize the fuel as finely as possible for near-perfect combustion and a quieter engine.

Advantages :
- Cleans and protects the turbo, EGR valve and DPF.
- Removes sludge and bacteria from diesel fuel.
- Reduces fuel consumption (up to 10%).
- Reduces pollution (CO2 emissions).
- Reduces knocking, popping and rattling noises.
- Lubricates pumps and injectors (effective action against seizing).

Dosage vehicles with FAP and all vehicles in urban traffic: 20ml for 40 liters or 30ml for 60 liters or 40ml for 80 liters of diesel.
Dosage for vehicles without FAP and all vehicles on the road: 10ml for 40 liters or 15ml for 60 liters or 20ml for 80 liters or 25ml for 100 liters of diesel.

Directions for use :
- 1 250ml bottle treats up to 20 full tanks of 50 liters of diesel (i.e. 1,000 liters of fuel).
- Easy to use with its built-in dispenser.

Save fuel and maintenance costs (FAP, EGR valve, Turbo) with MECARUN!

Please observe safety precautions.

MECARUN Eco 10000 Diesel 250ml is a multifunctional preventive and curative fuel treatment additive compatible with all modern and older diesel engines (HDI, TD, TDI, DCI, TDCI...).
Its main function is to thoroughly clean EGR valves, DPFs and turbos , and to protect thefuel system by dispersing diesel condensation water.
It effectively cleans combustion chambers (piston heads, valves) by destroying organic residues, carbon deposits, varnish, gum and kerosene.
It radically reduces black smoke and fouling on all mechanical engine components, lambda probes and catalytic converters.

Advantages :
- Reduced fuel consumption.
- Reduces pollution.
- Eliminates diesel condensation water.
- Cleans, lubricates and degreases injectors and injection pumps.
- Cleans air intake ducts, EGR valves, FAPs and turbos.
- Improves engine efficiency and smoothness.
- Makes it easier to pass anti-pollution tests.

Curative dosage (engine cleaning and anti-pollution control): pour 250ml bottle into 25 liters of diesel and run on the road for more than 20 minutes (regeneration) with this mixture up to the reserve.
Preventive dosage: 1 bottle of 250ml in 25 liters of diesel every 10,000kms (or at each overhaul).

Directions for use:
- Easy to use, with built-in dispenser.
- Recommended at every service or before your vehicle passes the anti-pollution test.

Clean, protect your engine and save on maintenance costs with MECARUN!

Please observe all safety precautions.

MOTUL All-in-One Multi-Action Diesel is a complete curative cleaner for all types of engines, with direct or indirect injection, atmospheric or turbo, with or without particulate filter (DPF), with or without SCR (Selective Catalyst Reduction), using diesel with or without biofuel percentage (compatible with B7 biodiesel 7% diesel and B10 biodiesel 10% diesel).
Thanks to its multi-action curative properties, it thoroughly cleans deposits and fouling in injectors and fuelsupply systems inherent to engine operation, thus limiting :

- injector and fuel system fouling
- Condensation in the entire fuel system
- gumming and varnishing of injectors and injection pumps
- Fouling of combustion chambers and intake valves

Its formulation ensures perfect lubrication during the cleaning phase and prevents the deposit of detached micro-particles. By eliminating deposits and clogging on valves, injectors and chambers, it ensures better combustion, restoring engine performance and reducing fuel consumption and emissions of noxious gases and particles. This additive is therefore specially recommended to prepare for your MOT ( roadworthiness test).

Advantages :
- Increases cetane number for optimum combustion and reduced fuel consumption
- Cleans injectors (for better diesel atomization)
- Prevents the formation of deposits on intake valves and in the combustion chamber
- Restores original engine power and performance
- Facilitates cold starts and improves driving pleasure
- Facilitates FAP regeneration, reducing emissions of noxious gases and particles
- Protects diesel fuel from oxidation
- Prevents the formation of micro-organisms in the fuel system

Dosage : 1 bottle of 1L treats up to 80 Litres of diesel (1 bottle for 1 full tank).

Directions for use :
- Pour the entire 1L can into the fuel tank via the filler neck.
- Drive normally until the treated fuel has been used up in one or more trips (the fuel system will then be completely cleaned, from the tank to the combustion chamber).
- For engines with high mileage or heavy soiling, use 2 successive treatments for optimum results.

Please observe all safety precautions.

L'hyper-lubrifiant MECACYL HJE 200ml soupapes et injecteurs essence est un traitement préventif et curatif idéal pour la protection et l'amélioration du système d'injection de n'importe quel type de moteur essence, superéthanol, GPL et hybride.
Sa formule exclusive présente un intérêt particulier pour les anciens moteurs qui roulent à l'essence sans plomb mais aussi pour les véhicules au GPL ou à l'E85. En effet, MECACYL HJE protège les soupapes et leur siège du dessèchement et des montées en température que peuvent entraîner ces types de carburants.

Dosage véhicules essence ou superéthanol E85 :
- 1/3 de flacon de 200ml soit 70ml pour 40 à 60L de carburant à répéter tous les 5000km (soit un flacon utilisé pour 15000km parcourus).

Dosage véhicules de collection lors du passage de l'essence plombée au sans plomb ou véhicules GPL :
- Mettre 10 à 20ml soit 1 à 2 bouchons maximum dans 20L de carburant.

Avantages :
- Nettoie les injecteurs, les chambres de combustion et limite leur encrassement.
- Lubrifie les soupapes tout en protégeant leur siège (E85, GPL).
- Protection complète du circuit de carburant contre l'eau et les contaminants.
- Réduit les fumées à l'échappement.
- Améliore le fonctionnement et la souplesse du moteur.
- Réduit les claquements pour un moteur plus silencieux (K-Jetronic, pompes etc...).
- Facilite le passage au contrôle technique.
- Compatible avec tous les carburants SP95, SP95-E10, SP98, superéthanol E85 et GPL.

Conseils d'utilisation véhicules essence ou superéthanol E85 :
- Verser dans le réservoir de carburant via son orifice de remplissage avant de faire le plein

Conseils d'utilisation véhicules de collection lors du passage de l'essence plombée au sans plomb ou véhicules GPL :
- Mettre 10 à 20ml soit 1 à 2 bouchons maximum dans 20 litres de carburant
- Bien mélanger
- Verser dans le réservoir de carburant via son orifice de remplissage
- Rouler jusqu'à épuisement du carburant traité
- Effectuer ensuite 3 à 4 pleins de carburant sans ajout d'hyper-lubrifiant
- Recommencer la procédure

Merci de respecter les précautions d'usage.

BARDAHL injector cleaner (500ml) cleans and protects the entireinjection system of all engines running on leaded or unleadedpetrol, with or without biofuel content (compatible with SP95-E5, SP95-E10 and SP98) or LPG.
It prevents seizure and restores injector flow, while protecting injection pumps. Thanks to its lubricating properties, it reduces cold noise and engine wear. It reducesexhaust emissions, making it easier to pass roadworthiness tests.

WARNING: Not suitable for Superethanol E85 (immiscible)!

Advantages :
- Easy to use
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions

Recommendations for use :
-Wait for reserve light to come on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 15 liters of petrol
- Drive normally until the treated fuel runs out, in one or more trips.
- Refuel as normal

Recommendation:
Once a year or every 5000km for city driving or short trips, or every 10000km for freeway driving.

Information: For heavily clogged engines, old engines or engines that have not passed their MOT, we recommend the use of BARDHAL injector cleaner in 1-liter format (reference UD23030).

Please observe all safety precautions.

BARDAHL Injector Cleaner (1 Litre) cleans and protects the entireinjection system of all engines running on leaded or unleadedpetrol, with or without biofuel content (compatible with SP95-E5, SP95-E10 and SP98) or LPG.
It prevents seizure and restores injector flow, while protecting injection pumps. Thanks to its lubricating properties, it reduces cold noise and engine wear. It reducesexhaust emissions, making it easier to pass roadworthiness tests.

WARNING: Not suitable for Superethanol E85 (immiscible)!

Advantages :
- 1 Litre format for thorough treatment
- Cleans and protects the entire injection system
- Restores injector flow
- Eliminates holes on acceleration and unstable idling
- Prevents over-consumption of fuel
- Limits pollutant particle emissions
- Makes it easier to pass roadworthiness tests (pollution measurement).

Recommendations for use :
-Wait until the reserve light is on
- Pour the entire bottle into the fuel tank via the filler neck
- Add 30 liters of gasoline
- Drive normally until the treated fuel is used up, in one or more trips.
- Refuel as normal

Recommendation:
Preferably used before the technical inspection or as a curative treatment on a heavily clogged or old engine.

Information: For engines with low mileage, recent models or preventive treatment, we recommend the use of BARDHAL injector cleaner in 500ml format (reference UD20202).

Please observe the precautions for use.

Eliminates deposits in fuel systems, injectors or carburettors, intake valves and combustion chamber.
Restores original power and performance.
Improves driving experience
Reduces fuel consumption and pollutant emissions.
Makes cold starts easier and protects against corrosion.

MECARUN C99 Ethanol 250ml is a high-performance fuel treatment additive for all modern and older fuel-injected engines running on E85 bioethanol (original equipment or fitted with an Eflexfuel box).
Its main function is to homogenize the gasoline/ethanol mixture to obtain better ignition and near-perfect combustion to increase efficiency while effectively reducing fuel consumption. C99 Ethanol allows you to drive up to 100 kilometers further on each fill-up, giving you fuel savings and lower Co² emissions.
It lowers ethanol's detergent power to preserve mechanical components and rubber hoses.
Its anti-friction and anti-adhesive properties will also act to protect injection pumps, injectors, valves and rings while making the engine quieter.

Advantages :
- Promotes combustion and ignition.
- Increases engine efficiency.
- Reduces fuel consumption (up to 10%).
- Lubricates and protects engine and hoses against the detergency of ethanol and the presence of water in the engine.
- Reduces knocking and rattling.

Dosage: 10 to 20ml per 40 liters of petrol (can be used in a petrol/ethanol blend with at least 50% ethanol content in the tank).

Directions for use:
- 1 250ml bottle treats up to 20 full 50-liter tanks of E85 bioethanol (i.e. 1000 liters of fuel).
- Easy to use with its built-in dispenser.

Save fuel and maintenance costs with MECARUN!

Please observe safety precautions.